trinityboringsolutions.com

Bowie Texas Directional Boring: Windthorst Soil, US 81 and Brushy Creek

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Bowie, Texas, for routes beneath US 81 and other paved crossings. Bowie is 155 road miles from our Yukon, Oklahoma main office, and we staff work near Wise Street with our crews or vetted partner crews. Windthorst soil and clay mapped about 40 inches down can make cuttings sticky, so the reamer and fluid plan matter on a Bowie bore. Brushy Creek routes call for crossing review before we set the bore path.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bowie bores at a glance

  • Incorporated city in Montague County, Texas. Population 6,054 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 155 miles, about 3.4 hours of driving.
  • Ground: Windthorst soil is mapped on 37 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 37 percent of the area.
  • Highways inside the boundary: US 81, US 287, Texas State Highway 59, FM 1125 and FM 1816. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: BNSF Railway and Union Pacific, with 19 mapped street and rail crossings.
  • Named streams inside the boundary: Brushy Creek and East Jones Creek.
  • Public water: City of Bowie, surface water.
  • Electric: City of Bowie municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Bowie’s Wise Street?

Trinity Boring Solutions takes directional boring jobs in Bowie, Montague County, where the Census Bureau Vintage 2024 estimate puts the population at 6,054. On Wise Street and routes toward US 287, our crews can install water, sewer, gas, electric conduit or fiber where a bore fits the alignment and avoids an open cut.

Our main office is in Yukon, Oklahoma, and Bowie work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have focused on directional boring since 1982; the range from 3/4 inch service lines to 48 inch casing suits Bowie routes from a small connection to a larger crossing.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Bowie soil survey show about Windthorst soil?

The USDA soil survey maps Windthorst as 37% of Bowie’s soil series, with Truce at 29%. Fine sandy loam is the mapped surface texture across 73% of the area. About 40 inches below the surface, clay is mapped in 35% of the area and sandy clay loam in 34%; the average clay content at that depth is 38%. For Bowie clay, we treat these mapped patterns as planning context, not as test borings for a specific bore. Clay can cling to a reamer and grip the pipe, so the bore plan needs to account for sticky cuttings even where the surface feels sandy.

USDA soil survey, inside the Bowie city limitsWhat is mapped
Soil series mappedWindthorst 37 percent, Truce 29 percent, Cona 10 percent, Waurika 7 percent and Duffau 5 percent
Texture at the surfacefine sandy loam 73 percent, stony sandy loam 10 percent and silt loam 7 percent
Texture about 40 inches downclay 35 percent, sandy clay loam 34 percent and channery clay 10 percent
Engineering class about 40 inches downlean clay (CL) 84 percent and fat clay (CH) 10 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches37 percent of the area (0 percent hard rock, 36 percent weathered rock)
Seasonal water table within 60 inches7 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel50 percent of the area

The USDA soil survey maps bedrock within 60 inches across 37% of Bowie, mostly weathered bedrock at 36%; hard bedrock is not mapped at that depth. A seasonal water table is mapped within 60 inches across 7%, so pits may need pumping. Flood prone soils cover 2%, which matters near Brushy Creek. High steel corrosion risk is mapped across 50%, a factor for casing and tracer wire material choices. The geologic map includes Cenozoic Quartz Sand Decomposition Residuum and Early Cretaceous Antlers Sand, so the route may transition between sandy material and claystone or sandstone.

How do we plan a bore through Bowie clay without treating mapped patterns as test borings?

In Bowie, we plan for mapped clay with staged reaming and controlled fluid use, treating the USDA soil survey as a guide rather than a site test. Brushy Creek and paved routes also shape the bore path.

  1. Near the City of Bowie water system or its municipal electric lines, we hydrovac pothole each marked utility before drilling near it; paint shows position, not depth.
  2. Where Bowie’s mapped clay is in the bore path, we use staged reaming and a fluid plan suited to sticky cuttings, then pull pipe while the hole is open.
  3. Under paved Bowie streets such as Wise Street, we watch fluid returns and keep pressure controlled so the ground is less likely to lift.
  4. Along routes with weathered bedrock mapped within 60 inches, we track the drill head from the surface and record depth and pitch as the bore advances.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where might a Bowie line go under Brushy Creek?

Bowie routes may cross US 81, US 287, Texas State Highway 59 and other state roads within the city limits. Wise Street runs 2.32 miles in the city, Mill Street 2.1 miles and Nelson Street 1.79 miles. Those streets give a project a specific alignment to plan around, while the highway routes can involve pavement and right of way. A bore can keep the surface intact, but the route, entry and exit pits, and existing utilities still need to fit the crossing.

CrossingTypeMapped extentWho has a say
US 81US highway6.4 roadway miles insideState highway office
US 287US highway6.1 roadway miles insideState highway office
Texas State Highway 59State highway5 roadway miles insideState highway office
FM 1125State highway1.3 roadway miles insideState highway office
FM 1816State highway1.1 roadway miles insideState highway office
FM 3043State highway0.9 roadway miles insideState highway office
FM 174State highway0.8 roadway miles insideState highway office
Texas State Highway 101State highway0.3 roadway miles insideState highway office
BNSF RailwayRailroad3.97 track miles insideThe railroad
Union PacificRailroad3.68 track miles insideThe railroad
Brushy CreekStream0.43 channel miles insideChecked for Corps of Engineers jurisdiction
East Jones CreekStream0.34 channel miles insideChecked for Corps of Engineers jurisdiction
Jones CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Brier CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 3.97 track miles in Bowie, and Union Pacific has 3.68; public records map 19 street and rail crossings in the city. Brushy Creek runs 0.43 channel miles and East Jones Creek 0.34. No street crossings of named streams are mapped in the city. A creek route still needs its own depth and access planning, while a rail route must be coordinated with the track owner.

Whose approval does a Bowie bore under BNSF Railway need?

A bore under BNSF Railway or Union Pacific track in Bowie needs an agreement with the railroad that owns that track, with crossing conditions set by the railroad. For work in the right of way of US 81, US 287, Texas State Highway 59 or another listed state road, the utility owner applies for a TxDOT utility permit through RULIS. The TxDOT Wichita Falls District reviews it. We prepare the bore plan and profile for the utility owner’s filing and work under its permit. TxDOT rules set cover and installation requirements, with the permit able to specify a different depth. Bowie’s city streets belong to the city itself. Brushy Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Bowie water system?

The City of Bowie public water system uses surface water and reports 3,883 service connections serving 5,534 people. Bowie also owns its municipal electric system, which reports 3,103 customers. Before a bore near Wise Street or US 81, we identify and expose marked lines, including water and electric lines, with hydrovac potholing before drilling close to them. Locate marks show a line’s position, not its depth.

Line ownerWhat it isSourceSize
City of BowiePublic water systemSurface water3,883 connections, 5,534 people served
City of Bowie municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration3,103 customers reported
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric CooperativeElectric utilities reporting service in Montague CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Bowie’s median housing year at 1971; 28% of homes were built before 1960, 52% from 1960 to 1999 and 20% in 2000 or later. That mix can mean work for both replacing older service lines and adding newer connections along streets such as Nelson Street. We pothole marked utilities on the route before the drill approaches them.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Bowie in relation to Sunset?

Bowie is in Montague County at an elevation of 1,119 feet and covers 5.52 square miles. We use ZIP code 76230 to identify Bowie service coverage while planning underground work around mapped conditions. Sunset is 8.9 miles southeast, Montague is 10.4 miles northeast and Bellevue is 11.1 miles northwest. Montague, the county seat, is 10.4 miles northeast; Gainesville is the nearest larger city listed, 40.5 miles east. From our Yukon, Oklahoma main office, Bowie is 155 road miles away and about a 3.4 hour drive, a distance that is part of planning mobilization for work near US 287 or Wise Street.

Places near Bowie

Which jobs call for a bore near Bowie’s Nelson Street?

  • Highway crossing: A bore beneath US 81 can carry a water line or conduit without cutting through the highway pavement.
  • Water service: A connection near the City of Bowie system can be routed beneath a street after marked lines are exposed.
  • Fiber route: A fiber bore along Wise Street can cross beneath paved sections while keeping the surface uncut.
  • Creek crossing: A Brushy Creek bore needs a route and depth plan that accounts for the channel and review during planning.
  • Rail crossing: A route under BNSF Railway track in Bowie needs coordination with the railroad that owns the crossing.
  • Electric conduit: Near Bowie’s municipal electric system, potholing helps identify marked lines before the drill approaches the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Bowie bore under US 81?

For a Bowie quote, start with the route, such as a crossing near US 81 or a service run off Nelson Street. Tell us what is going underground, whether it is water, sewer, gas, electric conduit or fiber, and give the pipe or conduit size and footage. A sketch or plans can show the pits, pavement and nearby Brushy Creek drainage that shape the route.

The price depends on the actual Bowie job. Length and pipe or conduit size matter, followed by soil and rock conditions; mapped clay can make reaming slower. The number of utilities to expose, pavement near US 81, and any Brushy Creek crossing also affect the work. Pits, excavator time and sand backfill add to the scope. A long mobilization from Yukon matters too, since Bowie is 155 road miles from our main office. High profile or emergency work can also change the plan.

Questions people ask about boring in Bowie

Does Trinity take directional boring work in Bowie and Montague County?

Yes, we take directional boring work in Bowie and across Texas. Bowie is 155 road miles from our Yukon main office, and work is staffed by our own crews or from satellite yards run by drilling contractor partners we have vetted. We coordinate with Trinity through the bore log, regardless of which crew is on site for the Bowie work.

What ground should I expect from Windthorst soil in Bowie?

The USDA soil survey maps Windthorst as 37% of Bowie’s soil series, with fine sandy loam common at the surface. About 40 inches down, clay is mapped in 35% of the area and sandy clay loam in 34%. Clay can make cuttings sticky and can grip pipe, so staged reaming and fluid control may be needed.

Is there bedrock near the surface on a Bowie bore?

The USDA soil survey maps bedrock within 60 inches across 37% of Bowie, with weathered bedrock mapped across 36%. For Bowie, we read the map as showing no hard bedrock within that depth, while keeping the depth limit in view. A bore can still encounter changes in material, so the route and drilling response matter, particularly where the ground shifts from soil into weathered rock.

Who approves a Bowie bore beneath US 81?

For work in the US 81 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Wichita Falls District reviews it. We prepare the bore plan and profile for that filing and work under the permit issued to the utility owner. TxDOT rules address cover and boring beneath existing highway pavement.

What do we need to plan for on a Bowie bore under BNSF Railway?

BNSF Railway has 3.97 track miles within Bowie, and a crossing needs an agreement from BNSF Railway as the track owner. The railroad sets the crossing conditions, including casing, depth and flagging. Union Pacific also has track in the city, so the track owner must be identified for the planned crossing.

Can a line be bored under Brushy Creek in Bowie?

A line can be planned beneath Brushy Creek, which runs 0.43 channel miles in Bowie, but the route needs crossing review before work. During planning, we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Entry and exit pits and the channel depth also shape the bore plan.

Can I call Trinity after hours about a Nelson Street bore in Bowie?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for an urgent bore concern near Nelson Street. Trinity also provides 24 hour emergency response. Tell us the location and what line or conduit is involved so we can understand the Bowie job.

How early should I call Texas811 for a bore on Wise Street in Bowie?

Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Wise Street paint shows line position, not depth. If marks wear off or move, have them refreshed through Texas811; if the start slips more than 14 days past the notice, make a new request.

What do we consider when pricing a directional bore under US 81 in Bowie?

The route length, pipe or conduit size, mapped clay and any rock all affect the Bowie quote. Utilities that need exposure, highway pavement at US 81, pits and equipment time also change the scope. A Brushy Creek crossing adds planning, and mobilization reflects the distance from our Yukon main office.

Where the Bowie facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bowie

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bowie, Texas

Type the address of your job in Bowie. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bowie

Same county: St. Jo · Nocona Hills · Ringgold. All counties: Texas county list.