trinityboringsolutions.com

Stafford Texas Directional Boring: Lake Charles Clay, Union Pacific Track, Stafford Run

Quick Answer: Stafford is an incorporated city, so its city streets belong to the city; we use directional boring, also called horizontal directional drilling (HDD), for routes beneath Main Street. Our Yukon main office is 474 road miles away, a mobilization distance relevant to work near Interstate 69. Lake Charles soil covers 57 percent of the mapped area, and clay at depth can cling to the reamer and pipe. Union Pacific track and Stafford Run are also route features to plan around.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Stafford bores at a glance

  • Incorporated city in Fort Bend County, Texas. Population 17,555 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 474 miles, about 9.2 hours of driving.
  • Ground: Lake Charles soil is mapped on 57 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 69, US 90 Alternate, US 59, FM 1092 and FM 2234. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Stafford Run and American Canal.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Union Pacific track in Stafford?

Stafford is an incorporated city in Fort Bend County, where the Census Bureau Vintage 2024 estimate puts the population at 17,555. For a water line along Main Street, sewer beneath Murphy Road, gas near US 90 Alternate, or electric conduit and fiber beside Promenade Boulevard, we plan the bore around the route and existing crossings.

Our main office is in Yukon, Oklahoma, and Stafford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, and we have done directional boring since 1982. Our record of no utility strike in over 25 years matters where new work meets Union Pacific track and existing lines reported by CenterPoint Energy in Fort Bend County.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Lake Charles soil mean for Stafford bores?

The USDA soil survey maps Lake Charles soil across 57 percent of Stafford. Surface texture is clay across 61 percent of the mapped area, while 37 percent is clay loam. At about 40 inches below the surface, clay is mapped under 99 percent of the area, with an average clay content of 55 percent at that depth. For Stafford boring plans, we treat mapped soil patterns as screening information, not as test borings. For a route near Stafford Run, heavy clay can hold the hole but stick to the reamer and grip pipe, so the ground calls for careful fluid control and staged reaming.

USDA soil survey, inside the Stafford city limitsWhat is mapped
Soil series mappedLake Charles 57 percent, Bernard 37 percent and Bacliff 4 percent
Texture at the surfaceclay 61 percent and clay loam 37 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 99 percent
Average clay content about 40 inches down55 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches42 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel99 percent of the area

In Stafford, we do not treat bedrock as mapped within the top five feet, though deeper rock may still affect boring plans. The USDA soil survey maps a seasonal water table within 40 inches across 42 percent of the area, so pits near Main Street may need pumping. For Stafford routes, we see no mapped flood prone soils, which does not establish site conditions. High steel corrosion risk covers 99 percent, a concern for steel casing and tracer wire that the line owner should address. The Beaumont Formation, areas predominantly clay, is mapped here and dates to the Pleistocene; its clay and silt support planning for sticky returns.

How do crews handle Stafford clay during a bore?

Lake Charles soil and the clay mapped about 40 inches down shape the drilling plan in Stafford. We keep fluid pressure controlled, check returns, and prepare the pipe before opening the hole for the final pull.

  1. Lake Charles soil is mapped across 57 percent of Stafford, so we use thinner drilling fluid with polymer and ream in stages to manage sticky clay.
  2. Clay covers 99 percent of the mapped soil at about 40 inches; we watch returns and keep fluid pressure low enough to protect pavement near Main Street.
  3. A seasonal water table is mapped within 40 inches across 42 percent of the area, so pits along Stafford Road may need pumping and a compact layout.
  4. Before drilling near a marked line on Murphy Road, we hydrovac pothole it to confirm depth; a walkover locator tracks the head and logs depth and pitch.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks could a Stafford bore cross near Main Street?

Interstate 69, US 90 Alternate, US 59, FM 1092 and FM 2234 run inside Stafford, while Loop 8 is 0.5 miles outside the city limits. Main Street is the longest named street at 5.71 miles in the city. Promenade Boulevard runs 2.7 miles, Murphy Road 2.25 miles and Stafford Road 1.88 miles. Those routes put pavement and road right of way in the planning picture; a bore can pass below a road rather than cut across its surface.

CrossingTypeMapped extentWho has a say
Interstate 69Interstate3.6 roadway miles insideState highway office
US 90 AlternateUS highway5.7 roadway miles insideState highway office
US 59US highway3.6 roadway miles insideState highway office
FM 1092State highway2.3 roadway miles insideState highway office
FM 2234State highway0.7 roadway miles insideState highway office
Loop 8Highway nearby0.5 miles outsideState highway office
Union PacificRailroad3.33 track miles insideThe railroad
Stafford RunStream0.95 channel miles insideChecked for Corps of Engineers jurisdiction
American CanalStream0.04 channel miles insideChecked for Corps of Engineers jurisdiction
Keegans BayouStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Oyster CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Frost LakeLake or pond53 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 3.33 track miles in Stafford on the Glidden Subdivision, and public mapping records four street and rail crossings in the city. Stafford Run has 0.95 channel miles here, and American Canal has 0.04; three street crossings of named streams are mapped. A route under either channel needs crossing review during planning. Frost Lake is 53 acres and lies outside the city limits, so it is not an in city lake crossing.

Who has to sign off on a Stafford bore under Interstate 69?

For a bore in Stafford city streets, the city owns the streets because Stafford is incorporated. Work in the right of way of Interstate 69, US 90 Alternate, US 59, FM 1092 or FM 2234 needs a TxDOT utility permit. The utility owner files through TxDOT’s online RULIS system, and the TxDOT Houston District reviews it; we prepare the bore plan and profile and work under the owner’s permit. Under Interstate 69, cover depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, and water and pressurized sewer crossings also need 60 inches. A Union Pacific crossing requires an agreement with the railroad. Stafford Run and American Canal are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines already in the ground in Fort Bend County near Stafford?

The water provider for a specific Stafford address has to be confirmed with the city, Fort Bend County or the local water district before a bore is planned. CenterPoint Energy reports electric service in Fort Bend County, but that does not identify the line owner at every Stafford address. Before an electric conduit bore near Main Street or Interstate 69, we confirm the owner for that route and its conduit specifications.

Line ownerWhat it isSourceSize
CenterPoint EnergyElectric utilities reporting service in Fort Bend CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Stafford’s median housing year at 1992; 3 percent of housing was built before 1960, 67 percent from 1960 to 1999 and 30 percent in 2000 or later. Housing age does not establish buried pipe age, but replacement work and new services can call for different routes. Before drilling near a marked line on Murphy Road, we hydrovac pothole each marked utility on the bore path; paint shows position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Stafford from Meadows Place and our Yukon office?

Stafford is in Fort Bend County, at an elevation of 78 feet, and covers 7.01 square miles. We use ZIP code 77477 to identify Stafford in project and address coordination. Meadows Place is 2.2 miles northwest, Fifth Street is 2.1 miles southeast, Sugar Land is 4.7 miles southwest and Missouri City is 4.7 miles south. Sugar Land is the nearest larger city, while Richmond, the county seat, is 12.1 miles west. The Yukon yard is 474 road miles away, a 9.2 hour drive, which affects mobilization for work near Promenade Boulevard or Stafford Run.

Places near Stafford

What would we bore near Promenade Boulevard in Stafford?

  • Highway crossing: A bore beneath Interstate 69 can keep a planned water or communication route below the pavement rather than cutting through it.
  • Street service: A water or sewer route along Main Street can use launch and reception pits outside the pavement, with marked utilities exposed first.
  • Fiber route: Fiber conduit beside Promenade Boulevard can be planned around existing lines and the clay mapped beneath Stafford.
  • Rail crossing: A proposed bore below Union Pacific track needs the railroad’s crossing agreement and a plan for its specified casing and depth.
  • Creek crossing: A route beneath Stafford Run needs channel planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Drainage route: A bore near American Canal can avoid cutting the channel bank, with the crossing reviewed during planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Stafford bore near Stafford Road?

For a quote near Stafford Road, give us the address or map pin first. Tell us what is going in the ground, such as water, sewer or fiber near Main Street. Include the pipe or conduit size and the footage; our work ranges from 3/4 inch service lines to 48 inch casing and from 10 feet to 5,000 feet. A sketch or plans help show nearby crossings.

The job route and scope determine the price. Lake Charles clay can affect drilling time and fluid control, while a crossing under Interstate 69 or Union Pacific track adds crossing planning. Length, pipe or conduit size, utilities to expose, pavement, pits, excavator time and sand backfill also shape the work. A route 474 road miles from Yukon adds mobilization considerations, especially if the plan includes Stafford Run or other drainage crossings.

Questions people ask about boring in Stafford

Does Trinity Boring Solutions take directional boring work in Fort Bend County near Stafford, and how is it staffed?

Yes. We take directional boring work across Texas, including Stafford in Fort Bend County. Our own crews and partner contractor crews vetted by Trinity can handle the work, while you deal with Trinity from the first call through the bore log. A route near Main Street is planned around its street and utility crossings.

What does a bore beneath Union Pacific track in Stafford require?

A bore beneath Union Pacific track in Stafford requires a crossing agreement with the railroad that owns it. For a Stafford crossing, we follow that agreement’s conditions for casing, depth and flagging before planning the bore. The track is part of the Glidden Subdivision, so the proposed route and the railroad’s requirements need review before work is planned.

Can a utility line be bored under Stafford Run in Stafford?

A bore under Stafford Run can be considered after the route and channel conditions are reviewed. Planning includes checking whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Stafford Run has 0.95 channel miles inside the city, so the route needs to account for the channel rather than treating it like an ordinary street crossing.

Who owns electric lines in Fort Bend County near Stafford, and who confirms conduit specifications?

CenterPoint Energy reports electric service in Fort Bend County, but that does not establish the owner at every Stafford address. The specific line owner must be confirmed before planning an electric conduit bore, including one near Interstate 69. We confirm conduit specifications with that owner before setting the route and bore plan.

Does Stafford or Fort Bend County control Murphy Road, and does a bore have to cut it?

Because Stafford is incorporated, we treat its city streets as belonging to the city when planning street boring. A bore along or beneath Murphy Road can usually be planned with pits on either side of the paved route, leaving the pavement uncut. The route still needs to account for marked utilities and any applicable right of way.

How does housing age near Promenade Boulevard affect replacement bores in Stafford?

The American Community Survey 2019 to 2023 estimates place Stafford’s median housing year at 1992. That does not establish the age of buried lines near Promenade Boulevard, but a replacement bore may follow a different route from a new service. We expose marked utilities on the path before drilling near them.

What bore sizes and lengths can Trinity handle for work near Stafford Road in Stafford?

We handle Stafford work from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a route near Stafford Road, the required pipe or conduit size and footage help determine the equipment and plan. A sketch can show where the route meets other utilities.

How much notice does Texas811 need for a bore near Main Street in Stafford, and what if marks move?

For a planned bore near Main Street, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days past the original notice, request again. Before we continue work in Stafford, we have worn or moved marks refreshed through Texas811.

What affects the cost of directional boring under Interstate 69 in Stafford?

The route and job details drive the price, not one fixed factor. Lake Charles clay, bore length, pipe or conduit size, pavement, utilities to expose, pits, creek crossings and sand backfill all matter. An Interstate 69 crossing adds planning considerations, and mobilization also reflects the 474 road miles from the Yukon yard.

Where the Stafford facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Stafford

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Stafford, Texas

Type the address of your job in Stafford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Stafford

Same county: Fulshear · Houston · Rosenberg · Mission Bend · Fresno · Cinco Ranch · Pecan Grove · Richmond · Katy · Pearland · Weston Lakes · Needville. All counties: Texas county list.