trinityboringsolutions.com

Four Corners Texas Directional Boring: Bernard Clay Loam, Keegans Bayou, Texas State Highway 6

Quick Answer: Need a line beneath Keegans Bayou or a street without opening the surface? We do directional boring, also called horizontal directional drilling (HDD), in Four Corners, Texas, to pass below those routes. Our Yukon, Oklahoma main office is 477 road miles away, and Texas State Highway 6 touches the mapped community boundary. USDA maps Bernard clay loam here, a sticky ground that can build up on a reamer. Keegans Bayou has 2.33 channel miles inside the community, so its crossing needs a route and pit plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Four Corners bores at a glance

  • Unincorporated community in Fort Bend County, Texas. Population 12,103 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 477 miles, about 9.3 hours of driving.
  • Ground: Bernard soil is mapped on 52 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • No state or US highway is mapped inside the boundary. Closest: Texas State Highway 6.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Keegans Bayou.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring in Four Corners near Texas State Highway 6?

Yes. We take directional boring work in Four Corners, Fort Bend County, where the 2020 Census count was 12,103; the Census Bureau does not publish yearly estimates for this unincorporated place. A water line could run beneath a street such as Belfort Boulevard, while fiber or electric conduit might pass below a route toward Texas State Highway 6. We also install sewer and gas lines.

Our main office is in Yukon, Oklahoma, and Four Corners work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Directional boring has been part of our work since 1982, after our family business began in 1965. Four decades of drilling guide our planning for the sticky Bernard clay loam mapped around Old Richmond Road and other local routes.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Bernard soil affect drilling in Four Corners?

The USDA soil survey maps Bernard soil across 52 percent of Four Corners, Lake Charles across 43 percent and Edna across 5 percent. At the surface, clay loam covers 52 percent of the mapped area and clay covers 43 percent. At about 40 inches below the surface, the survey maps clay across the area, with an average clay content of 54 percent. It maps no sandy area at that depth. This describes mapped patterns, not a test at a bore site; Bernard clay loam can stick to a reamer, so the route still needs field checks.

USDA soil survey, inside the Four Corners mapped community boundaryWhat is mapped
Soil series mappedBernard 52 percent, Lake Charles 43 percent and Edna 5 percent
Texture at the surfaceclay loam 52 percent, clay 43 percent and loam 5 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches57 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA map shows no bedrock in the top five feet around Four Corners, which does not rule out rock deeper down. A seasonal water table is mapped within 40 inches across 57 percent of the area, so pits near Keegans Bayou may need pumping and careful placement. Flood prone soils are not mapped in Four Corners, but we account for its Bernard, Lake Charles, and Edna soils when planning underground work. High steel corrosion risk covers the mapped area, a consideration for casing and tracer wire. The Beaumont Formation, areas predominantly clay, is Pleistocene age; its clay and mud favor staged reaming and controlled drilling fluid.

How do crews handle clay in Four Corners?

USDA maps clay across Four Corners at about 40 inches deep, and Bernard clay loam is common. We adjust the bore plan for sticky cuttings, wet ground and the nearby streets or Keegans Bayou.

  1. Bernard clay loam is common in Four Corners, so we use staged reaming and a thinner fluid plan to manage sticky cuttings.
  2. With heavy clay mapped at about 40 inches, we watch fluid returns near Bissonnet Street to avoid pressure lifting pavement.
  3. Where the seasonal water table is mapped within 40 inches, pits near Keegans Bayou may need pumping and a compact layout.
  4. Before a bore near Old Richmond Road, we hydrovac pothole each marked utility on the path; paint shows position, not depth.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where does a line have to go under Keegans Bayou in Four Corners?

Texas State Highway 6 runs along or touches the mapped community boundary, but no highway is mapped inside Four Corners. Bissonnet Street runs 1.44 miles inside the community, Old Richmond Road 1.35 miles and Belfort Boulevard 1.13 miles. A bore beneath one of those streets can avoid cutting its surface, with entry and exit pits placed off the pavement. A route approaching Texas State Highway 6 needs to account for the state right of way and its permit process.

CrossingTypeMapped extentWho has a say
Texas State Highway 6Highway nearbyRuns along or touches the city limitsState highway office
Keegans BayouStream2.33 channel miles insideChecked for Corps of Engineers jurisdiction
White LakeLake or pond38 acres, nearbyChecked for Corps of Engineers jurisdiction
Gannoway LakeLake or pond28 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Four Corners or within one mile outside the community, and no mapped street and rail crossing is identified. Keegans Bayou runs 2.33 channel miles inside the community, with three mapped street crossings of named streams. White Lake and Gannoway Lake are within one mile but outside the boundary. A planned bayou crossing needs a route that protects the channel, and its review includes checking for U.S. Army Corps of Engineers jurisdiction.

Who approves a Four Corners bore in Fort Bend County?

Four Corners has no city government, so street approvals belong to Fort Bend County and highway approvals belong to the state. Texas State Highway 6 touches the mapped community boundary; for work in its right of way, the utility owner applies through TxDOT’s RULIS system. TxDOT’s Houston District reviews the application, while we prepare the bore plan and profile and work under the utility owner’s permit. For a Texas State Highway 6 crossing near Four Corners, TxDOT rules call for boring beneath existing pavement; we coordinate through TxDOT Houston District. Keegans Bayou crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. No railroad is mapped nearby, but a route that reaches railroad property needs an agreement from the railroad that owns the track.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already in the ground in Fort Bend County near Four Corners?

The provider for a particular Four Corners address has to be confirmed with Fort Bend County or the local water district before a bore is planned. The records available here do not identify a water system serving this place. CenterPoint Energy reports electric service in Fort Bend County, but that does not confirm the provider at every address. We confirm the line owner before planning an electric conduit bore near Bissonnet Street or another local route.

Line ownerWhat it isSourceSize
CenterPoint EnergyElectric utilities reporting service in Fort Bend CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median year built for Four Corners housing at 2004. The survey estimates 2 percent of homes were built before 1960 and 75 percent in 2000 or later. That mix can mean either replacing an older line or extending a newer service near Old Richmond Road. We hydrovac pothole every marked utility on the bore path before drilling near it; paint shows where a line runs, not its depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

How far is Four Corners from Meadows Place and our Yukon office?

Four Corners is an unincorporated community in Fort Bend County at an elevation of 93 feet, covering 2.41 square miles. Four Corners uses ZIP codes 77498 and 77083; we confirm the route and utility clearances before planning underground work near Mission Bend. Mission Bend is 1.7 miles north, Meadows Place is 4.6 miles east, Pecan Grove is 5.4 miles southwest, Sugar Land is 5.6 miles south and Stafford is 6.4 miles southeast. Richmond, the county seat, is 8.6 miles southwest. The Yukon, Oklahoma yard is 477 road miles away, a 9.3 hour drive; that distance is part of planning mobilization for work near Texas State Highway 6.

Places near Four Corners

What kinds of bores come up in Four Corners near Belfort Boulevard?

  • Street crossing: A bore beneath Belfort Boulevard can pass under the pavement instead of cutting across the street.
  • Highway crossing: Work near Texas State Highway 6 needs a utility owner permit for any state right of way route.
  • Water line: A service route near Old Richmond Road starts with confirming the provider for that specific address.
  • Fiber conduit: A bore along Bissonnet Street can carry conduit below the road surface, with marked utilities exposed first.
  • Bayou crossing: A route beneath Keegans Bayou needs channel planning and a check for federal jurisdiction.
  • Electric conduit: Near Bellfort Street, confirm the line owner before setting conduit size and bore alignment.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Four Corners bore near Bellfort Street?

For a Four Corners quote, give us the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route along Bellfort Street or beneath Keegans Bayou can change the access and crossing details, so include those features in the sketch if they are part of the job.

The scope sets the price, with the mapped Bernard clay loam shaping ground conditions and the number of utilities to expose affecting the crossing work. Concrete or pavement along Belfort Boulevard, a drainage crossing at Keegans Bayou, pit size, excavator time and sand backfill can also change the job. Texas State Highway 6 may add right of way planning, while mobilization reflects the 477 road miles from Yukon. Bore length, pipe size and emergency timing matter too.

Questions people ask about boring in Four Corners

Does Trinity Boring Solutions take jobs in Four Corners, Fort Bend County, and who staffs them?

Yes. We take directional boring work in Four Corners, and our own crews or crews from satellite yards operated by drilling partners we have vetted can handle the field work. You work with Trinity from the first call through the bore log, whether the crew is working near Belfort Boulevard or another local street.

Can a line be bored under Keegans Bayou in Four Corners?

Yes, a bore can be planned beneath Keegans Bayou, which has 2.33 channel miles inside the community. The route and pits need to suit the channel, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. We also locate and expose marked utilities along the proposed path.

Who owns electric lines in Four Corners, Fort Bend County, and who confirms conduit specs?

CenterPoint Energy reports electric service in Fort Bend County, but that does not identify the line owner at every Four Corners address. Confirm the owner for the specific location before choosing conduit requirements. For a proposed run near Old Richmond Road, that check helps set the bore plan around the actual line and existing utilities.

Does Fort Bend County control Belfort Boulevard in Four Corners, and must it be cut?

Four Corners has no city government, so county or state authorities handle its streets and permits. A bore beneath Belfort Boulevard can pass under the pavement without an open cut across the road. The route still needs utility locates and potholing so marked lines are exposed before drilling approaches them.

How old are Four Corners lines near Old Richmond Road, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates a 2004 median housing year in Four Corners, with 75 percent of homes built in 2000 or later and 2 percent before 1960. Those figures do not date buried lines. A replacement bore near Old Richmond Road should be planned around the existing route and verified utilities.

Could groundwater or flood prone ground affect bore pits near Keegans Bayou in Four Corners?

It could. The USDA soil survey maps a seasonal water table within 40 inches across 57 percent of Four Corners, so a pit near Keegans Bayou may need pumping or a smaller footprint. Flood prone soils are not mapped, but the bayou channel still needs to be considered in the crossing plan.

Can I reach Trinity after hours about an urgent Four Corners bore near Belfort Boulevard?

Yes. We answer Trinity’s phone 24 hours a day at (405) 409-7423, and can discuss underground routes near Bissonnet Street in Four Corners. For an urgent bore near Belfort Boulevard, be ready to describe the location, the line involved and the immediate issue so we can understand the work being requested.

How much notice does Texas811 need for a Four Corners bore near Bissonnet Street?

Count back at least two working days from the planned start near Bissonnet Street; Saturdays, Sundays and legal holidays do not count. Do not request the locate more than 14 days before work. If the start moves more than 14 days past the original notice, submit a new request, and have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a Four Corners bore near Texas State Highway 6?

When a Four Corners scope involves Bissonnet Street, we set the price according to the work that crossing requires. Factors include bore length and pipe size, the heavy clay mapped around Four Corners, marked utilities to expose, pavement, pits and drainage crossings such as Keegans Bayou. A route near Texas State Highway 6 can involve state right of way planning, and mobilization also reflects the 477 road miles from Yukon.

Where the Four Corners facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Four Corners

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Four Corners, Texas

Type the address of your job in Four Corners. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Four Corners

Same county: Missouri City · Fulshear · Houston · Rosenberg · Fresno · Cinco Ranch · Richmond · Katy · Pearland · Weston Lakes · Needville · Fifth Street. All counties: Texas county list.