trinityboringsolutions.com

Garden City Texas Directional Boring: Reagan Soil, Texas State Highway 158 and Lacy Creek

Quick Answer: Garden City is an unincorporated community and county seat, so Glasscock County or the state owns the streets and roads; we handle directional boring, also called horizontal directional drilling (HDD), for routes near Texas State Highway 158. From our Yukon, Oklahoma main office, the jobsite is 414 road miles away, with Texas State Highway 158 shaping access and permitting. Reagan silty clay loam is common here and can hold a bore open while sticking to the reamer. We adjust fluid and reaming to the mapped ground before pulling pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Garden City bores at a glance

  • County seat of Glasscock County, Texas. Population 334 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 414 miles, about 8.2 hours of driving.
  • Ground: Reagan soil is mapped on 52 percent of the area, with silty clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 158 and RM 33. State permit office: TxDOT San Angelo District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Garden City near Texas State Highway 158?

Garden City is an unincorporated community and the Glasscock County seat, so its public streets are not owned by a city government. The Census Bureau counted 334 people here in 2020. We install water, sewer, gas, electric conduit and fiber along routes such as Keathley Street, with the bore plan matched to the address and the line being placed.

Our main office is in Yukon, Oklahoma, and Garden City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been directional boring since 1982. More than four decades of drilling helps us plan for Garden City’s mapped Reagan soil, which can cling to a reamer and affect the pullback.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Reagan soil like to bore in Garden City?

The USDA soil survey maps Reagan soil across 52 percent of Garden City, with Conger at 33 percent and Tobosa at 11 percent. Silty clay loam is the leading surface texture at 56 percent. At 40 inches, silty clay loam accounts for 45 percent of the mapped area, and the average clay content there is 34 percent. The survey maps 67 percent as heavy clay at that depth and no sandy area there. These are soil patterns, not test borings, so a route still needs site specific planning.

USDA soil survey, inside the Garden City mapped community boundaryWhat is mapped
Soil series mappedReagan 52 percent, Conger 33 percent, Tobosa 11 percent and Angelo 4 percent
Texture at the surfacesilty clay loam 56 percent, clay loam 33 percent and clay 11 percent
Texture about 40 inches downsilty clay loam 45 percent, loam 33 percent and clay 11 percent
Engineering class about 40 inches downlean clay (CL) 89 percent and fat clay (CH) 11 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel23 percent of the area

USDA mapping does not place bedrock in the top five feet of Garden City. The geologic map names Edwards Limestone, an Albian unit of limestone, dolostone and chert; deeper rock still needs to be considered during planning. Seasonal water tables within 40 or 60 inches and flood prone soils are not mapped here. High steel corrosion risk covers 23 percent of the mapped area, so the line owner should consider casing and tracer wire materials. Clay can grip pipe, while gravelly mapped ground can affect steering.

How do we plan a bore through Garden City’s silty clay loam near Lacy Creek?

Garden City’s silty clay loam and clay loam call for controlled fluid and staged reaming. On a route near Texas State Highway 158, we also watch returns so pressure does not lift pavement.

  1. Reagan silty clay loam can stick to the reamer, so we use a thinner fluid mix and staged reaming before pulling pipe along a route near Main Street.
  2. Where Garden City’s mapped heavy clay occurs, we watch fluid returns closely and keep pressure controlled near pavement such as Texas State Highway 158.
  3. The survey maps gravelly ground in part of Garden City; we check drill depth and pitch at each rod to keep the head on line.
  4. Before a bore near Lacy Creek or a Garden City street, we hydrovac expose marked utilities, then track the drill head and log its depth and pitch.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

What does a bore have to cross in Garden City near Lacy Creek?

Texas State Highway 158 has 1.6 mapped roadway miles inside Garden City, and RM 33 has 1.1. Both are state highways, so a route near either needs to account for the state right of way. Main Street is the longest named street at 0.86 miles, followed by Pecan Street at 0.77 miles and Keathley Street at 0.71 miles. The mapped community has 15.13 public road centerline miles overall. Boring can keep pavement and driveways intact, with entry and exit pits set in dirt.

CrossingTypeMapped extentWho has a say
Texas State Highway 158State highway1.6 roadway miles insideState highway office
RM 33State highway1.1 roadway miles insideState highway office
Lacy CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Garden City or within 1 mile outside its boundary, so no local track crossing is identified. Lacy Creek is 0.5 miles beyond the mapped community boundary, and no named stream crossing of a street is mapped inside it. The community has 3.74 miles of unnamed drainage, which can affect a route even without a named channel. We plan routes around Lacy Creek; no lakes or ponds are mapped within 1 mile of Garden City. A creek or channel route is checked for federal jurisdiction during planning.

Who has to sign off on a Garden City bore in Glasscock County?

Garden City has no city government, so Glasscock County handles county roads and Texas State Highway 158 and RM 33 remain under state control. Work in the right of way of either highway needs a TxDOT utility permit reviewed by the TxDOT San Angelo District. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that owner’s application and work under its permit. TxDOT rules call for boring or tunneling under existing highway pavement, with required cover set by line type and the permit. A route near Lacy Creek is checked for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Garden City in Glasscock County?

The water provider for a specific Garden City address needs to be confirmed with the county, the city or the local water district before a bore is planned. EPA drinking water records do not tie water systems to towns, and no system name here identifies the provider. Oncor Electric Delivery Company and Concho Valley Electric Cooperative report electric service in Glasscock County, but the line owner at the address must be confirmed before an electric conduit bore. We use hydrovac potholing to expose marked water and electric lines before drilling near them.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Concho Valley Electric CooperativeElectric utilities reporting service in Glasscock CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use the American Community Survey 2019 to 2023 five year estimates: Garden City’s median housing year is 1971, but age does not locate utilities. Three percent of housing units were built before 1960, 82 percent from 1960 to 1999 and 15 percent in 2000 or later. A replacement bore near Pecan Street may meet older services, while a new service needs its own route check. We expose each marked utility on the bore path before drilling near it because locate marks show position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Garden City and Stanton?

Garden City is the Glasscock County seat in Texas, at an elevation of 2,677 feet and with a mapped area of 1.77 square miles. Its ZIP code is 79739. Forsan is 17.9 miles northeast, Stanton is 25.2 miles northwest, and Big Spring is 25.3 miles north; Big Spring is the nearest larger city. Our Yukon yard is 414 road miles away, an 8.2 hour drive. That distance is part of planning mobilization for a bore near Texas State Highway 158.

Places near Garden City

What kinds of bores come up on Keathley Street in Garden City?

  • Highway crossing: A route beneath Texas State Highway 158 is bored under the pavement, with the utility owner arranging the TxDOT permit.
  • Water service: A service along Pecan Street needs its address specific water provider confirmed before we plan the connection bore.
  • Fiber route: A conduit bore along Keathley Street can pass beneath pavement without an open cut, subject to the route and utility locates.
  • Drainage crossing: A route near Garden City’s 3.74 miles of unnamed drainage needs a profile that keeps the bore below the drainage path.
  • Electric conduit: Near Bearkat Avenue, we confirm the line owner and expose marked electric facilities before drilling close to them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Garden City bore near Bearkat Avenue?

For a Garden City quote near Main Street, send the address or map pin, what will go in the ground, pipe or conduit size, footage, and any sketch or plans. A route near Bearkat Avenue may have different access and utility crossings than a route along Texas State Highway 158, so the proposed path matters as much as the footage.

The drive from Yukon is 414 road miles, so mobilization is part of pricing for a Garden City job. Reagan soil and the mapped clay affect drilling and reaming; the size and length of the line also matter. Crossings and exposed utilities add work, especially near Texas State Highway 158 or drainage. Pavement, pits, excavator time, sand backfill and emergency or high profile work can change the scope.

Questions people ask about boring in Garden City

Does Trinity Boring Solutions take directional boring jobs in Glasscock County’s Garden City?

Yes. We take directional boring projects in Garden City near RM 33 and across Texas, coordinating routes around the local highway network. Our own crews and partner drilling contractors Trinity has vetted can staff the work from satellite yards, while you coordinate with Trinity through the job. For a route near Texas State Highway 158, we plan around the state right of way and the utility owner’s permit.

Does the TxDOT San Angelo District handle approval for a bore under Texas State Highway 158 in Garden City?

TxDOT reviews the utility permit through its San Angelo District for work in the Texas State Highway 158 right of way. The utility that owns the line submits the application in RULIS, and we prepare the bore plan and profile for it. Existing highway pavement is crossed by boring or tunneling, not an unapproved open cut.

Can a line be bored under Lacy Creek near Garden City?

A bore may be planned under a creek, but the route needs review first. Lacy Creek lies 0.5 miles outside Garden City’s mapped boundary, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. We also assess the channel and access before setting the bore path.

Who owns electric lines in Glasscock County near Garden City, and who confirms conduit specs?

Oncor Electric Delivery Company and Concho Valley Electric Cooperative report electric service in Glasscock County, but that does not establish the provider at every Garden City address. The line owner for the specific route must be confirmed before a conduit bore, and that owner confirms the conduit requirements. Marked lines are exposed before drilling near them.

Who controls Keathley Street in Garden City, and does a bore require cutting it?

Garden City is unincorporated, so it has no city government; Keathley Street is not a city owned street. County road control applies to county roads, while state highways are controlled by TxDOT. A directional bore can pass beneath street pavement without cutting across it, with the route and any right of way approvals checked first.

How old are homes and buried lines near Pecan Street in Garden City?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1971, but that does not date buried lines on Pecan Street. A replacement bore may need to avoid existing services, while a new connection has a different route. We pothole marked utilities to verify their locations before the drill approaches.

What bore sizes and lengths can Trinity handle near Bearkat Avenue in Garden City?

Across Garden City’s Reagan soils, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A proposed job near Bearkat Avenue still needs a route review, since Reagan soil, utility crossings and available space for entry and exit pits affect the plan.

How much notice does Texas811 need for a bore near Main Street in Garden City?

The person arranging the work describes the bore path along Main Street or another Garden City route when requesting a locate. Texas law requires notice at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring under Texas State Highway 158 in Garden City?

The route and scope determine the price, with no single factor deciding it. For Texas State Highway 158, the right of way permit, pavement and required cover matter. Reagan soil, bore length and pipe size also affect the work, as do utility crossings, potholing, drainage, pits and mobilization from Yukon. The job details are needed to assess those factors.

Where the Garden City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Garden City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Garden City, Texas

Type the address of your job in Garden City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Garden City

All counties: Texas county list.