trinityboringsolutions.com

Texhoma Texas Directional Boring: Dalhart Fine Sandy Loam, US 54, Union Pacific

Quick Answer: Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), for routes beneath US 54 in Texhoma, Texas. Texas Street is the longest named street, and the Yukon main office is 272 road miles from Texhoma, which has 12.24 public road miles. Dalhart fine sandy loam is mapped across part of the city, so the ground can call for staged reaming. Gruver clay loam can be sticky, making fluid control and a ready pipe pull important.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Texhoma bores at a glance

  • Incorporated city in Sherman County, Texas. Population 252 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 272 miles, about 5.9 hours of driving.
  • Ground: Dalhart soil is mapped on 38 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 54. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: Union Pacific.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 54 in Texhoma?

Trinity Boring Solutions handles directional boring in Texhoma, Sherman County, including routes along US 54. Texas Street, 2nd Street and Denver Street are the longest named streets among the city’s 12.24 public road miles. We account for Texhoma’s Census Bureau Vintage 2024 population estimate of 252 when planning underground work. We install water, sewer, gas, electric conduit and fiber along Texhoma streets where the route and existing lines allow.

Our main office is in Yukon, Oklahoma, and Texhoma work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Directional boring has been part of our work since 1982, building four decades of experience relevant to the clay loam and fine sandy loam mapped around Texhoma. The family business began in 1965.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Dalhart soil like to bore through in Texhoma?

Texhoma’s mapped ground includes Dalhart fine sandy loam and Gruver clay loam, with the USDA soil survey showing a mix of soil patterns rather than one uniform layer. Dalhart soils account for 38 percent of the mapped series, while Gruver accounts for 31 percent. At about 40 inches below the surface, the survey maps clay loam across 62 percent of the area and sandy clay loam across 38 percent. The mapped average clay content there is 32 percent, which can make cuttings sticky and affect how the reamer moves.

USDA soil survey, inside the Texhoma city limitsWhat is mapped
Soil series mappedDalhart 38 percent, Gruver 31 percent, Sunray 21 percent and Dumas 10 percent
Texture at the surfacefine sandy loam 38 percent, clay loam 31 percent and loam 31 percent
Texture about 40 inches downclay loam 62 percent and sandy clay loam 38 percent
Engineering class about 40 inches downlean clay (CL) 62 percent and clayey sand (SC) 38 percent
Average clay content about 40 inches down32 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel31 percent of the area

Bedrock is not mapped in Texhoma’s top five feet, though that does not rule out deeper rock. Seasonal water tables and flood prone soils are not mapped, so the mapped ground does not point to those as routine bore constraints. High steel corrosion risk is mapped across 31 percent of the area, making casing and tracer wire material a line owner decision. The geologic map includes Loess, loessial alluvium, and loessial colluvium of Quaternary age, along with Paleocene Cenozoic sedimentary rocks; deeper conditions still need to be judged along the route.

How is a bore run through Texhoma clay loam?

For a Texhoma route through Gruver clay loam, we tune the drilling fluid and reaming sequence to limit sticky buildup while keeping the bore on line.

  1. Gruver clay loam is mapped across 31 percent of Texhoma, so we adjust fluid and ream in stages to manage sticky cuttings.
  2. Dalhart fine sandy loam is mapped in the city, so we stage the reaming and have the pipe ready before the final pass.
  3. Along Texhoma pavement, we watch fluid returns and pressure so the bore does not push upward beneath US 54 or a street.
  4. Before drilling near a marked line on Texas Street, we hydrovac pothole to expose it; paint alone does not show its depth.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross on Texhoma Texas Street?

A Texhoma bore may need to pass beneath US 54, which has 1.4 mapped roadway miles inside the city limits. Texas Street is the longest named street at 1.38 miles, followed by 2nd Street at 0.84 miles and Denver Street at 0.56 miles. Pearl Street and Moorman Street each run 0.56 miles in the city. A bore beneath pavement can leave the road surface uncut, while the path and access points still need to fit the street and highway conditions.

CrossingTypeMapped extentWho has a say
US 54US highway1.4 roadway miles insideState highway office
Union PacificRailroad1.57 track miles insideThe railroad
Swipe the table sideways to see every column.

Union Pacific owns 1.57 track miles inside Texhoma, on the Union Pacific Pratt Subdivision. No street and rail crossings are mapped in the city, but a proposed route that reaches the tracks still needs railroad coordination. No streams are mapped inside or within one mile of the limits, and no street crossings of named streams are mapped. No lakes or ponds are mapped within one mile, so a mapped water crossing is not a defining feature of Texhoma routes.

Whose permission does a Texhoma bore near Union Pacific need?

For a Texhoma bore beneath US 54, cover depth helps set the route: electric and communication lines need at least 60 inches below the lowest crossed grade, while water lines need 60 inches and pressurized sewer lines need 60 inches at crossings. TxDOT’s Amarillo District reviews right of way utility permits, which the utility owner files through RULIS; we prepare the bore plan and profile for that filing. Work beneath existing highway pavement is bored or tunneled, and rural highway crossings extend beneath all travel lanes. A crossing of Union Pacific track requires an agreement with the railroad. Texhoma’s public streets are city streets.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Texhoma, Sherman County?

The water provider for a Texhoma address must be confirmed with the city, Sherman County or the local water district before planning a bore; available EPA drinking water records cannot match a system to this place. Electric utilities reporting service in Sherman County are Southwestern Public Service, Rita Blanca Electric Cooperative and Tri-County Electric Cooperative. Those reports do not identify the provider at every Texhoma address, so we confirm the line owner before planning an electric conduit route along US 54 or a city street.

Line ownerWhat it isSourceSize
Southwestern Public Service, Rita Blanca Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Sherman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Texhoma’s median housing year at 1962; 47 percent of homes were built before 1960, 38 percent from 1960 to 1999 and 15 percent in 2000 or later. That mix can mean a bore on 2nd Street is replacing an older service as well as adding a new one. Before drilling near marked lines, we hydrovac pothole to see what is below the surface, since locate paint shows position but not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Texhoma and nearby Gruver soil country?

Texhoma is an incorporated city in Sherman County, with an elevation of 3,504 feet and a land area of 1.9 square miles. We use Texhoma ZIP codes 79086 and 73960 to confirm the service location before coordinating underground work. Stratford, the county seat, is 19.0 miles southwest; Gruver is 26.9 miles southeast, and Sunray is 32.9 miles south. Dumas, the nearest larger city, is 44.7 miles south. The Yukon yard is 272 road miles away, a 5.9 hour drive, so distance is part of planning a Texhoma mobilization.

Places near Texhoma

What would we bore along Texhoma Denver Street?

  • Highway crossing: A route beneath US 54 is bored under pavement, with the TxDOT permit and cover depth guiding the plan.
  • Water service: A service near Texas Street can be bored between access pits, with the provider confirmed for that address first.
  • Fiber route: Fiber conduit along 2nd Street can be installed underground to avoid cutting the paved route.
  • Rail crossing: A proposed route beneath Union Pacific track needs the railroad’s agreement before the crossing is planned.
  • Utility replacement: A replacement service near Denver Street can follow a bore path that avoids opening the street surface.
  • Electric conduit: A conduit route near Pearl Street starts with confirming which reported Sherman County electric utility owns the line.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Texhoma Pearl Street?

For a Texhoma quote, start with an address or map pin, such as a point on Pearl Street. Tell us what will go underground, whether water, sewer, fiber or electric conduit, then give the pipe or conduit size and the footage. A sketch or plans showing the route near US 54 help us understand the crossings and access before we plan the work.

A short, clear route through Gruver clay loam with few marked utilities is simpler to plan than a longer path with difficult crossings. The quote reflects footage, pipe or conduit size, soil, utilities to expose, pavement, pits and equipment time. US 54 or Union Pacific crossings can add planning steps, while Texhoma’s 272 road miles from Yukon affect mobilization. Drainage crossings, sand backfill, high profile work or an emergency schedule can also change the job scope.

Questions people ask about boring in Texhoma

Does Trinity take directional boring work in Texhoma, Sherman County, and who staffs it?

Yes, we take directional boring work in Texhoma, Sherman County, and staff it through our own crews or a vetted partner contractor’s satellite yard. You work with Trinity from the first call through the bore log, including when a different crew is at the site. A route on US 54 can be planned with those same points of contact.

Who is responsible for Denver Street in Texhoma, and can a bore avoid cutting it?

Denver Street is a city street in incorporated Texhoma, so the city is responsible for its streets. A directional bore can pass beneath the street without opening the pavement, subject to the route and any required approvals. We check marked lines along Denver Street before drilling near them.

How do Texhoma’s older homes and buried lines affect a replacement bore on 2nd Street?

Texhoma’s housing has a median year built of 1962, and the American Community Survey estimates 47 percent was built before 1960. That can make a replacement service on 2nd Street a different job from a new service. We expose marked utilities by hydrovac before drilling close to them, because surface marks do not show depth.

Can Dalhart soil in Texhoma corrode steel, and what pipe should we use?

The USDA soil survey maps high steel corrosion risk across 31 percent of Texhoma, including areas with Dalhart soil. That is a material concern for steel casing and tracer wire, not a reason to assume a particular pipe choice. The line owner selects appropriate materials or coatings for the route.

What ground does a Texhoma bore encounter in Dalhart soil?

The USDA soil survey maps Dalhart fine sandy loam across parts of Texhoma, while at about 40 inches it maps clay loam over 62 percent of the area and sandy clay loam over 38 percent. Those mapped patterns are not test borings. Clay can build up on a reamer, so staged reaming and fluid control can matter.

Will directional boring in Texhoma hit rock?

Bedrock is not mapped within the top five feet in Texhoma, but the map does not rule out rock deeper down. The local geologic map includes Quaternary loess, loessial alluvium, and loessial colluvium, as well as Paleocene Cenozoic sedimentary rocks. The actual route and depth determine what the drill encounters.

What bore sizes and lengths can you handle for a Texhoma job near Pearl Street?

For a Texhoma route near Pearl Street, we handle lines from 3/4 inch service lines up to 48 inch casing and bore lengths from 10 feet to 5,000 feet. The size and footage are only part of the plan; the mapped clay loam and nearby utilities also shape the method.

How early should I call Texas811 for a Texhoma bore along Texas Street?

For a Texas Street bore, the locate request goes to Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start is more than 14 days after the original notice, make a new request. Before resuming work in Texhoma, we refresh marks that wear off or move through Texas811.

What affects the cost of directional boring in Texhoma under US 54?

The US 54 route, footage, pipe size, soil, pavement and the number of utilities that need exposure all affect a Texhoma bore quote. A Union Pacific crossing adds coordination, while the 272 road miles from Yukon affect mobilization. Pit work, sand backfill, drainage crossings and schedule demands can also change the scope.

Where the Texhoma facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Texhoma

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Texhoma, Texas

Type the address of your job in Texhoma. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Texhoma

All counties: Texas county list.