trinityboringsolutions.com

Bangs Texas Directional Boring: Pedernales Soil, US 67 and BNSF Railway

Quick Answer: Bangs is a small incorporated city in Brown County, so its city streets belong to the city; we do directional boring, also called horizontal directional drilling (HDD), for crossings such as US 67. The Yukon main office is 351 road miles away, and the BNSF Railway adds another crossing to plan around. USDA mapping shows sandy clay at 40 inches across 44 percent of Bangs. That ground can hold a hole, but sticky clay calls for staged reaming and controlled drilling fluid.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bangs bores at a glance

  • Incorporated city in Brown County, Texas. Population 1,535 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 351 miles, about 7.1 hours of driving.
  • Ground: Pedernales soil is mapped on 29 percent of the area, with sandy clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 22 percent of the area.
  • Highways inside the boundary: US 67, US 84 and FM 586. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: BNSF Railway, with 4 mapped street and rail crossings.
  • Public water: City of Bangs, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near West Fork Clear Creek in Bangs?

Bangs is a small incorporated city in Brown County, so its public streets belong to the city. The Census Bureau Vintage 2024 estimate puts the population at 1,535. We install water, sewer, gas, electric conduit and fiber lines, including service runs along 6th Street or connections crossing US 84. A mapped stream, West Fork Clear Creek, lies 0.4 miles from the city limits, a site detail to check if a project approaches it.

Our main office is in Yukon, Oklahoma, and Bangs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet under the Arkansas River in Tulsa, with 48 inch pipe. A typical Bangs job is more likely a shorter service or utility crossing near US 67, and we stay involved from the first call through the bore log.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Pedernales soil affect drilling in Bangs?

The USDA soil survey maps Pedernales soil across 29 percent of Bangs, with Abilene at 15 percent and Chaney at 14 percent. At about 40 inches below the surface, sandy clay is mapped under 44 percent of the city, while the average clay content at that depth is 39 percent. Heavy clay is mapped across 79 percent of the area at that depth. These are mapped soil patterns, not test borings. For a bore near 6th Street, sticky clay can build on a reamer and grip the pipe, so the plan may call for thinner fluid and staged reaming.

USDA soil survey, inside the Bangs city limitsWhat is mapped
Soil series mappedPedernales 29 percent, Abilene 15 percent, Chaney 14 percent, Sagerton 13 percent and Leeray 10 percent
Texture at the surfaceclay loam 28 percent, loamy fine sand 22 percent and loamy sand 14 percent
Texture about 40 inches downsandy clay 44 percent, clay 23 percent and clay loam 13 percent
Engineering class about 40 inches downclayey sand (SC) 34 percent, fat clay (CH) 32 percent and lean clay (CL) 31 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches22 percent of the area (3 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel50 percent of the area

The USDA survey puts typical bedrock depth at 43 inches; bedrock is mapped within 60 inches in 22 percent of Bangs and within 40 inches in 8 percent. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 7 percent. High steel corrosion risk is mapped across 50 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil corrosion concern. The Travis Peak Formation, an Aptian unit of conglomerate, sandstone and limestone, can vary in thickness, so a bore near West Fork Clear Creek still needs a site specific plan.

How is a bore run through sandy clay in Bangs?

Sandy clay is mapped under 44 percent of Bangs at about 40 inches, and heavy clay across 79 percent. We match the reamer and fluid plan to the ground, then track the drill head as the bore advances near local streets such as Hall Street.

  1. With sandy clay mapped under 44 percent of Bangs at about 40 inches, we use fluid suited to the ground and ream in stages to manage sticky cuttings.
  2. Where heavy clay is mapped across 79 percent at that depth, we watch returns and control fluid pressure so it does not lift pavement near Hall Street.
  3. Loamy fine sand is mapped under 22 percent of the city at the surface; where encountered, we keep the hole supported and have the pipe ready before final reaming.
  4. Before the drill nears marked lines along 6th Street, we pothole to expose each utility, then use a walkover locator to track depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads, tracks or creeks can a Bangs bore cross near US 67?

US 67 and US 84 each have 1.5 mapped roadway miles inside Bangs, while FM 586 has 1.6. A line crossing one of these routes needs a different plan from a service run along a local street. The longest named streets include 6th Street at 1.51 miles, Hall Street at 1.47 miles and West Street at 1.3 miles. The city has 27.59 public road centerline miles, so access and the exact crossing point matter when laying out pits.

CrossingTypeMapped extentWho has a say
US 67US highway1.5 roadway miles insideState highway office
US 84US highway1.5 roadway miles insideState highway office
FM 586State highway1.6 roadway miles insideState highway office
BNSF RailwayRailroad1.43 track miles insideThe railroad
West Fork Clear CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.43 track miles inside Bangs, with four mapped street and rail crossings in the city. A crossing of that track needs coordination with its owner. No named stream runs inside the city limits, and no mapped street crossings of named streams are recorded there. West Fork Clear Creek is 0.4 miles outside the limits, while 1.38 miles of unnamed drainage are mapped inside Bangs; those features can affect a route even without a named creek crossing.

Who approves a Bangs bore in Brown County?

Bangs is incorporated, so its city streets are under city control; a bore along Hall Street is not a county street project. For work in the right of way of US 67, US 84 or FM 586, the line owner, not the driller, applies for the TxDOT utility permit through RULIS. TxDOT’s Brownwood District reviews it, and we give the utility owner the bore plan and profile. The permit sets the required cover. For electric or communication lines, the rule calls for 60 inches at a highway crossing and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it. Pressurized sewer needs 60 inches at crossings, subject to district direction. A BNSF Railway crossing requires an agreement with the railroad. If work approaches West Fork Clear Creek, planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Bangs system?

The City of Bangs public water system uses purchased surface water and reports 929 service connections serving 2,964 people. That network can shape a water service bore along Hall Street or a connection toward 6th Street. AEP Texas North, Oncor Electric Delivery Company and Comanche County Electric Cooperative Association report electric service in Brown County. The line owner is confirmed for the specific address before an electric conduit bore is planned, since those utilities do not necessarily serve every Bangs property.

Line ownerWhat it isSourceSize
City of BangsPublic water systemSurface water bought from another system929 connections, 2,964 people served
AEP Texas North, Oncor Electric Delivery Company and Comanche County Electric Cooperative AssociationElectric utilities reporting service in Brown CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Bangs at 1968; 42 percent of housing was built before 1960, while 12 percent dates to 2000 or later. A replacement bore near West Street may pass older water or service lines, while a newer connection may call for a fresh route. Before drilling near either, we use hydrovac potholing to expose marked utilities; along a street with older homes, paint alone does not show how deep a line lies.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Do you cover Bangs and nearby Lake Brownwood?

Bangs is in Brown County, at an elevation of 1,604 feet, and covers 1.5 square miles of land. Its ZIP code is 76823. Lake Brownwood is 7.1 miles north, and Brownwood, the county seat and nearest larger city, is 9.0 miles east. Early is 11.5 miles east and Santa Anna is 11.6 miles west. From our Yukon, Oklahoma main office, the road distance is 351 miles and the drive is 7.1 hours. Those miles matter when we plan crew and equipment mobilization for a bore on US 67 or a service near Lake Brownwood.

Places near Bangs

Which jobs call for a bore along West Street in Bangs?

  • Highway crossing: A bore under US 67 keeps the route beneath the roadway rather than cutting across its pavement.
  • Water service: A connection to the City of Bangs system can run beneath Hall Street where an open cut would interrupt the street.
  • Fiber conduit: A bore along West Street can carry conduit past driveways and marked lines without opening the pavement.
  • Rail crossing: A route beneath BNSF Railway needs the railroad owner’s crossing agreement and a plan for the track.
  • Drainage crossing: A route near West Fork Clear Creek needs the channel and drainage setting considered before drilling begins.
  • Street service: A bore near 6th Street can connect a property while keeping the street surface uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near 6th Street in Bangs?

For a 6th Street job, send the street address or a map pin first. Tell us what will go in the ground, such as water line, sewer or fiber conduit, then give the pipe or conduit size and the footage. A sketch or plans help show whether the route crosses US 67, a driveway or a marked utility.

A simple route along West Street with clear access is easier to plan than a bore crossing US 67 or BNSF Railway. Price reflects length, pipe or conduit size, soil and rock, the number of utilities to expose, and pavement or concrete. Creek or drainage crossings, pits, excavator time and sand backfill also affect the work. The 351 road miles from Yukon can add mobilization needs, while high profile or emergency work can change the scope.

Questions people ask about boring in Bangs

Does Trinity Boring Solutions take directional boring jobs in Bangs and Brown County?

Yes. We take directional boring work in Bangs, and the project is handled through Trinity from the first call to the bore log. Our main office is in Yukon, Oklahoma; Bangs work uses our own crews and partner contractor satellite yards we have vetted. A route near US 67 is planned around its specific access and crossing conditions.

Who runs the public water system in Bangs, and where does its water come from?

The City of Bangs owns the public water system, which uses purchased surface water. Public records report 929 service connections and 2,964 people served. A new service or replacement route near Hall Street needs to account for the existing system and other marked lines before drilling.

Which electric companies report service in Bangs and Brown County, and who confirms conduit specs?

AEP Texas North, Oncor Electric Delivery Company and Comanche County Electric Cooperative Association report electric service in Brown County. That does not establish which company serves a particular Bangs address. The line owner is identified before planning a conduit bore near 6th Street, and the conduit requirements are confirmed with that owner.

Does the city or county control West Street in Bangs, and must it be cut for a bore?

Bangs is incorporated, so West Street is a city street rather than a county road. A directional bore can pass beneath the street without cutting its surface. The exact route and any right of way approvals depend on the work location; marked utilities near West Street are exposed before the drill approaches.

How old are homes and buried lines near Hall Street in Bangs, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates put Bangs’s median housing year at 1968, with 42 percent built before 1960. That age can mean a replacement route near Hall Street must account for existing services. We pothole marked utilities before drilling, because surface paint does not show line depth.

Can Pedernales soil in Bangs corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 50 percent of Bangs. Pedernales soil covers 29 percent of the city, but the risk at a specific bore must be checked against its route. HDPE avoids soil corrosion concerns; the line owner selects any coating for steel casing or tracer wire.

How much Texas811 notice is needed for a Bangs bore near 6th Street, and what if marks fade?

Request the locate at least 48 hours before digging, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a 6th Street start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

How far is Bangs from Trinity’s Yukon office, and does Brownwood affect the job?

Bangs is 351 road miles and a 7.1 hour drive from our Yukon, Oklahoma main office. Brownwood is 9.0 miles east and is the county seat. The Yukon distance can affect mobilization for a bore near US 84, while the job’s route, access and ground determine the work plan.

What affects the cost of a directional bore under US 67 in Bangs?

The job scope sets the price, without a standard figure for a US 67 crossing. Length, pipe or conduit size, soil and rock, pavement, and the number of utilities to expose all matter. BNSF Railway or drainage crossings can add planning and equipment needs, and the 351 road miles from Yukon affect mobilization.

Where the Bangs facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bangs

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bangs, Texas

Type the address of your job in Bangs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bangs

Same county: Blanket · May · Zephyr. All counties: Texas county list.