Wilson Texas Directional Boring: Acuff Loam, FM 211, Green Avenue
Quick Answer: Acuff loam is common in Wilson, and its clay content can make a bore sticky as the reamer moves. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes beneath FM 211 and other Wilson roads. The Yukon, Oklahoma main office is 374 road miles away, with 10th Street among the local routes a project may involve. We plan the bore around the mapped ground and the line being installed.
Wilson bores at a glance
- Incorporated city in Lynn County, Texas. Population 457 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 374 miles, about 7.3 hours of driving.
- Ground: Acuff soil is mapped on 92 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 211 and FM 400. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Wilson, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Wilson and FM 211?
Acuff loam is the main mapped soil in Wilson, and its clay can cling to a reamer during drilling. We take directional boring work in Wilson, Lynn County, for a population of 457, according to the Census Bureau Vintage 2024 estimate. Water, sewer, gas, electric conduit and fiber lines can be bored along streets such as Green Avenue or beneath FM 211, depending on the route and plans.
Our main office is in Yukon, Oklahoma, and Wilson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa. A Wilson route near 10th Street is a different scale of work, with its length and line size set by the project.

What does the soil survey show about Wilson and Acuff soil?
The USDA soil survey maps Acuff soil across 92 percent of Wilson, mostly as Acuff loam on 0 to 1 percent slopes. At about 40 inches below the surface, sandy clay loam is mapped under 92 percent of the city, while clay loam accounts for 7 percent. Average clay content at that depth is 33 percent. Acuff and Estacado are mapped soil series in Wilson, not test borings, so we use them as planning context rather than subsurface confirmation. For a drill, the clay rich material can stick to tooling and grip pipe, so the crew needs to manage fluid and reaming.
| USDA soil survey, inside the Wilson city limits | What is mapped |
|---|---|
| Soil series mapped | Acuff 92 percent and Estacado 7 percent |
| Texture at the surface | loam 99 percent |
| Texture about 40 inches down | sandy clay loam 92 percent and clay loam 7 percent |
| Engineering class about 40 inches down | lean clay (CL) 99 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 8 percent of the area |
Bedrock is not mapped in the top five feet of Wilson, though the geologic map shows Cenozoic sedimentary rocks of Paleocene age beneath the surface materials. A shallow seasonal water table is mapped in 1 percent of the area, so pits on an affected route may need pumping. In Lynn County, flood prone soils are not mapped for Wilson, so we do not treat that gap as proof of safe boring conditions. High steel corrosion risk is mapped in 8 percent of the area; the line owner should weigh casing and tracer wire materials, while HDPE avoids that steel concern.
How do we plan a Wilson bore through the stated sandy clay loam near FM 211 while accounting for site conditions?
Wilson’s sandy clay loam can hold a bore open but may stick to the reamer. We adjust the fluid and reaming sequence to the Acuff soil and the route conditions.
- Acuff soil is predominantly loam at the surface, with sandy clay loam mapped at about 40 inches; we tune drilling fluid to limit sticky buildup on the reamer.
- Clay can grip pipe and build up on tooling, so a Wilson bore may use thinner fluid, staged reaming and a pullback timed to the open hole.
- The USDA survey maps a shallow seasonal water table in part of Wilson; where a route encounters it, we keep pits small and pump water as needed.
- Before drilling near a marked utility on 10th Street, we expose it with hydrovac potholing; paint indicates position, not depth, so we verify the line below grade.

What does a bore have to cross in Wilson near 10th Street?
FM 211 and FM 400 are the state highways mapped inside Wilson, with 1.2 roadway miles of FM 211 and 0.9 miles of FM 400 in the city. Green Avenue, 10th Street and 11th Street are among the longest named local streets. A route along or beneath those roads needs to account for pavement, driveways and marked utilities. Boring can keep the surface intact, while the exact alignment and work limits depend on the plans and the road owner.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 211 | State highway | 1.2 roadway miles inside | State highway office |
| FM 400 | State highway | 0.9 roadway miles inside | State highway office |
No railroad is mapped inside Wilson or within one mile outside its limits, and no street and rail crossing is mapped in the city. No streams or lakes and ponds are mapped in or within one mile of Wilson, and no street crossing of a named stream is mapped. That leaves no mapped rail or water feature to plan around on a typical 10th Street route, though the actual site and proposed path still need review.
Who has to sign off on a Wilson bore in Lynn County?
For work in the right of way of FM 211 or FM 400, the utility owner, not the driller, applies for the TxDOT utility permit through RULIS; the TxDOT Lubbock District reviews it. We give the line owner the bore plan and profile for its application and work under the permit issued to that owner. TxDOT cover rules vary by line type, including 60 inches at highway crossings for electric, communication and water lines. Wilson is an incorporated city, so streets such as Green Avenue belong to the city; we coordinate street access accordingly. Texas811 requires notice at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days ahead.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Wilson water system?
The City of Wilson public water system draws from groundwater wells and reports 198 service connections serving 446 people. For electric conduit work near Green Avenue or elsewhere in Lynn County, Oncor Electric Delivery Company, Southwestern Public Service, Lyntegar Electric Cooperative and South Plains Electric Cooperative report service in the county. We confirm the line owner for the specific route before planning a conduit bore; those county reports do not identify the provider at every Wilson address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Wilson | Public water system | Groundwater wells | 198 connections, 446 people served |
| Oncor Electric Delivery Company, Southwestern Public Service, Lyntegar Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Lynn County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Wilson’s median housing year at 1963; 41 percent of units were built before 1960, 54 percent from 1960 to 1999 and 5 percent in 2000 or later. Replacement work along 13th Street may need to connect with older buried lines, while a new service follows its own route. We hydrovac pothole each marked utility on the bore path before the drill approaches it, such as a marked line beneath Green Avenue.

How far is Wilson from New Home and our Yukon yard?
Wilson is in Lynn County at an elevation of 3,124 feet, and the city covers 0.65 square miles in ZIP code 79381. New Home is 10.6 miles west, while Slaton is 9.8 miles northeast and is the nearest larger city. Tahoka, the county seat, is 11.4 miles south. The Yukon yard is 374 road miles away, a 7.3 hour drive. That distance is part of planning a Wilson job, alongside access to the proposed route and its equipment needs.
Places near Wilson
- Directional boring in Slaton: 9.8 miles northeast
- Directional boring in New Home: 10.6 miles west
- Directional boring in Tahoka: 11.4 miles south
- Directional boring in Ransom Canyon: 14.8 miles north
- Directional boring in Buffalo Springs Lake: 14.9 miles north
What would we bore near Green Avenue in Wilson?
- Highway crossing: A bore beneath FM 211 needs a route and installation plan that follows the TxDOT permit for the utility owner.
- Water service: A connection near the City of Wilson system starts with confirming the existing groundwater line and the proposed tie in.
- Fiber route: A conduit bore along Green Avenue can pass below pavement and driveways without cutting the surface.
- Street replacement: Work near 13th Street can route a replacement line around existing utilities after marked lines are exposed.
- Electric conduit: Along FM 400, we confirm the line owner before setting the route for a new conduit bore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Wilson bore near 13th Street?
For a Wilson estimate, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route on 13th Street gives us a local reference for checking the proposed path, access and nearby marked lines before we define the work.
On a Wilson project near FM 400, our defined job scope sets the price for the work. Acuff loam and its clay content affect drilling and reaming; line size and footage set the scale of the work. Crossings and exposures matter too, especially where a route meets FM 211 or pavement along 13th Street. Pits, excavator time, sand backfill and concrete can change the plan. Mobilization also reflects the 374 road miles from Yukon, and emergency or high profile work can add demands.
Questions people ask about boring in Wilson
Does Trinity take directional boring work in Wilson and Lynn County?
Yes, we take directional boring projects in Wilson and Lynn County. Our crews handle the work, with support from satellite yards operated by partner drilling contractors we have vetted. Customers work with Trinity from the first call through the bore log, whether the crew is working near FM 211 or on a local street.
What do Wilson’s older homes along Green Avenue mean for replacement bores?
Wilson’s housing stock has a median construction year of 1963, based on American Community Survey 2019 to 2023 estimates. Older homes near Green Avenue may be part of a replacement project, but the route and existing lines must be checked at the site. On Houston Avenue, we expose marked utilities before drilling close to them to protect the crossing.
What ground should I expect in Wilson’s Acuff soil?
Acuff soil is mapped across 92 percent of Wilson, and sandy clay loam covers 92 percent of the mapped area at about 40 inches deep. That material can cling to drilling tools and grip the pipe. The USDA soil survey describes mapped patterns, not test borings, so site conditions still guide the bore plan.
Will our directional bore under 12th Street in Wilson encounter rock at depth?
For Wilson bore planning, we treat bedrock as unmapped in the top five feet while allowing for possible deeper rock. The geologic map identifies the Blackwater Draw Formation, with sand, fine alluvium and silt, above Cenozoic sedimentary rocks of Paleocene age. A bore near 10th Street still needs a route planned for what the drill encounters.
Who approves a utility bore beneath FM 211 in Wilson?
The line owner applies for a TxDOT utility permit when work uses the FM 211 right of way. The TxDOT Lubbock District reviews the application in RULIS. We prepare the bore plan and profile for the utility owner’s filing, then work under the permit issued to that owner.
Who runs Wilson’s public water system, and where does its water come from as we plan underground work in the incorporated city?
The City of Wilson owns and operates the public water system, which gets water from groundwater wells. Public records list 198 service connections and 446 people served in Wilson; we account for underground infrastructure when planning a bore. For a bore near Green Avenue, the specific water line and owner still need to be confirmed along the proposed route.
Does Trinity cover Slaton and rural sites outside Wilson?
Yes, we take work in Slaton, 9.8 miles northeast of Wilson, and at rural sites outside the city limits. The route, access and distance from the Yukon yard help define the job. For work near Wilson, a map pin or plans can show how the proposed route meets local roads such as FM 400.
How much notice does Texas811 need for a bore on Wilson’s 10th Street?
For excavation near 10th Street, Texas law requires a locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, a new request is needed. If utility marks on 16th Street are worn or moved, we have them refreshed through Texas811 before work continues.
What affects the cost of a directional bore near FM 211 in Wilson?
The price depends on the job details, including length, pipe or conduit size, soil, utility exposures, pavement, pits and equipment time. A route near FM 211 can involve state highway permitting, while Acuff soil affects drilling decisions. Mobilization also matters because Wilson is 374 road miles from the Yukon yard.
Where the Wilson facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Wilson
- U.S. Census Bureau, TIGER/Line 2024: Wilson boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Wilson
- U.S. Census Bureau, American Community Survey 2019 to 2023: Wilson housing units and year built
- Macrostrat geologic map compilation: map units under Wilson
- U.S. EPA Safe Drinking Water Information System: public water systems serving Wilson
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lynn County
- U.S. Geological Survey, Elevation Point Query Service: Wilson elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Wilson
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Wilson
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Wilson, Texas
Type the address of your job in Wilson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Wilson
Same county: O'Donnell. All counties: Texas county list.
