trinityboringsolutions.com

Slaton Texas Directional Boring: Amarillo Fine Sandy Loam, US 84, BNSF Railway

Quick Answer: Trinity Boring Solutions uses directional boring, or horizontal directional drilling (HDD), for utility routes crossing US 84 in Slaton. Division Street, Vetch Avenue and Geneva Street lead the named streets across 98.16 public road miles. BNSF Railway and South Plains Lamesa Railroad tracks shape routes; the Yukon yard is 354 road miles away. Amarillo soil covers 44 percent of mapped ground, while sandy clay loam below can cling to tooling and call for staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Slaton bores at a glance

  • Incorporated city in Lubbock County, Texas. Population 5,698 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 354 miles, about 7 hours of driving.
  • Ground: Amarillo soil is mapped on 44 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 84, US 84 Business, FM 400, FM 2150 and FM 41. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway and South Plains Lamesa Railroad, with 5 mapped street and rail crossings.
  • Public water: City of Slaton, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 84 in Slaton?

Trinity Boring Solutions takes directional boring work in Slaton, Lubbock County, for water, sewer, gas, electric conduit and fiber routes along streets such as Division Street and crossings of US 84. The Census Bureau Vintage 2024 estimate puts Slaton at 5,698 residents, and its streets and highway corridors call for route planning around existing pavement and buried lines.

Our main office is in Yukon, Oklahoma, and Slaton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, more than four decades of boring have taught us to account for ground like Slaton’s sandy clay loam with staged reaming and controlled fluid. Our family business started in 1965.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Amarillo soil in Slaton?

Slaton’s mapped ground is led by Amarillo soil, with the USDA soil survey assigning 44 percent of the city to that series and 34 percent to Acuff. At the surface, fine sandy loam covers 46 percent of the mapped area, while loam covers 38 percent. About 40 inches down, 80 percent is mapped as sandy clay loam and 11 percent as clay loam. The average clay content at that depth is 30 percent, so a bore may encounter sticky material that builds on the reamer rather than loose sand.

USDA soil survey, inside the Slaton city limitsWhat is mapped
Soil series mappedAmarillo 44 percent, Acuff 34 percent, Olton 10 percent, Zita 3 percent and Randall 3 percent
Texture at the surfacefine sandy loam 46 percent, loam 38 percent and clay loam 10 percent
Texture about 40 inches downsandy clay loam 80 percent, clay loam 11 percent and loam 3 percent
Engineering class about 40 inches downlean clay (CL) 93 percent and fat clay (CH) 3 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches3 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel9 percent of the area

The USDA soil survey does not map bedrock in Slaton’s top five feet, though deeper rock is not ruled out. Seasonal water tables within 40 inches are mapped in 3 percent of the area, so pits may need pumping at those locations; flood prone soils are not mapped. High steel corrosion risk covers 9 percent, a factor for the line owner to weigh when specifying steel casing or tracer wire. The geologic map includes Eolian Sheet Sand of Cenozoic age and Cenozoic sedimentary rocks of Paleocene age, so the mapped surface material is not the whole picture below.

How do crews handle Slaton’s sandy clay loam?

For Slaton’s sandy clay loam, our crews control fluid and ream in stages so sticky soil does not load the tooling or grip the pipe. On Division Street, the route and nearby utilities shape the bore plan.

  1. Because sandy clay loam makes up 80 percent of the mapped soil at about 40 inches, we use thinner drilling fluid and polymer to limit sticky buildup.
  2. On an Amarillo soil route, staged reaming helps manage clay that can cling to the tooling; we plan to pull the pipe while the bore is open.
  3. Before a drill approaches marked utilities on Division Street, we expose each one with hydrovac potholing; surface marks show position, not depth.
  4. At a Slaton site where seasonal water is mapped within 40 inches, we keep pits small and pump them if water collects.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line in Slaton near Division Street?

Slaton has US 84, US 84 Business, FM 400, FM 2150 and FM 41 within its limits, so a route can meet state highway right of way as well as city streets. Division Street is the longest named street at 2.99 miles, followed by Vetch Avenue at 2.71 miles and Geneva Street at 2.01 miles. A crossing beneath 9th Street or another paved road can keep the surface intact, but the proposed alignment still has to account for traffic lanes, pavement and marked utilities.

CrossingTypeMapped extentWho has a say
US 84US highway8.1 roadway miles insideState highway office
US 84 BusinessUS highway3.3 roadway miles insideState highway office
FM 400State highway2.8 roadway miles insideState highway office
FM 2150State highway1.1 roadway miles insideState highway office
FM 41State highway0.6 roadway miles insideState highway office
BNSF RailwayRailroad4 track miles insideThe railroad
South Plains Lamesa RailroadRailroad2.59 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway has 4.0 track miles in Slaton, and South Plains Lamesa Railroad has 2.59; the city map shows 5 street and rail crossings. There are no named streams mapped inside the limits, but 0.59 miles of unnamed drainage are shown. With no lakes or ponds mapped within one mile in Slaton, we can assess the bore route against available mapping. A route near that drainage calls for checking the actual crossing conditions before setting bore depth.

Who approves a Slaton bore near US 84 and BNSF Railway?

For a bore beneath US 84, US 84 Business or an FM road in Slaton, TxDOT’s Lubbock District reviews the utility permit. The utility that owns the line submits through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. Electric and communication crossings need at least 60 inches of cover below the lowest crossed grade, while water crossings need 60 inches and pressurized sewer crossings need 60 inches. A different depth may be set in the permit. Slaton city streets belong to the city, and BNSF Railway or South Plains Lamesa Railroad track crossings require an agreement with the owner. Any creek, river, bayou or lake crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Slaton and Lubbock County?

The City of Slaton owns its public water system, which uses purchased surface water and reports 2,176 service connections serving 5,858 people. Electric service reported in Lubbock County comes from Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric Cooperative. Those records do not identify the provider at every Slaton address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of SlatonPublic water systemSurface water bought from another system2,176 connections, 5,858 people served
Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Lubbock CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Slaton’s median housing year at 1963; 43 percent of units were built before 1960, 47 percent from 1960 to 1999 and 10 percent in 2000 or later. That mix can mean replacing older service lines as well as adding new ones near streets such as 9th Street. We hydrovac pothole every marked utility on the route before drilling near it, because paint shows position but not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Slaton in relation to Ransom Canyon?

Slaton is an incorporated city in Lubbock County, at an elevation of 3,082 feet across 5.4 square miles, with ZIP code 79364. Ransom Canyon is 6.2 miles north, Buffalo Springs Lake is 6.7 miles northwest, and Wilson is 9.8 miles southwest. Lubbock, the county seat and nearest larger city, is 15.9 miles northwest. Slaton is 354 road miles and a 7.0 hour drive from our Yukon, Oklahoma yard, a distance that figures into mobilization for work near US 84.

Places near Slaton

What kinds of bores come up in Slaton near Geneva Street?

  • Highway crossing: A bore under US 84 or FM 400 can keep the existing pavement uncut, with the route planned to the applicable TxDOT permit.
  • Water service: A connection near the City of Slaton water system can use a bore to pass beneath paved streets without opening a trench across them.
  • Fiber route: A conduit run along Geneva Street can be planned around existing marked utilities and the street’s paved sections.
  • Rail crossing: A line beneath BNSF Railway track needs an agreement with the railroad owner, with crossing details set for that location.
  • Drainage crossing: Near Slaton’s mapped unnamed drainage, the alignment can be planned to pass beneath the channel without cutting its banks.
  • Park service: A utility route serving Slaton City Park can use a bore beneath a nearby street to avoid an open cut across the pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Slaton bore near 9th Street?

A map pin matters in Slaton because a route near 9th Street can have different pavement, utility and access conditions from one near Division Street. For a Slaton bore under US 84, send us the address or pin, what goes underground, pipe or conduit size, and footage. A sketch or plans help us see the alignment and any road, track or drainage crossing.

In Slaton, the soil and crossing count lead the price review: sandy clay loam can affect reaming, while US 84 or BNSF Railway crossings add route and permit planning. We also consider pipe or conduit size, length, utilities to expose, pavement or concrete, drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can change the scope, and mobilization reflects the 354 road miles from Yukon.

Questions people ask about boring in Slaton

Does Trinity take boring work in Slaton and Lubbock County, and who staffs it?

Yes. We take directional boring work in Slaton, and it is handled by our own crews or partner contractor crews from satellite yards. From the first call through the bore log for a Slaton crossing under BNSF Railway, we stay involved even when another crew is on site. For a route near Division Street, send the proposed location and scope.

Will a Slaton bore hit rock below Amarillo soil?

Bedrock is not mapped in Slaton’s top five feet, but that does not rule out deeper rock. The geologic map shows Eolian Sheet Sand of Cenozoic age and Paleocene Cenozoic sedimentary rocks. Those mapped units help frame planning, while the actual route and depth determine how the bore is set up.

Who do we need approval from for a bore under US 84 in Slaton?

TxDOT’s Lubbock District reviews a utility permit for work beneath US 84 in Slaton. The utility owner files through RULIS, and we provide the bore plan and profile for its application. The permit sets the crossing conditions, including cover depth, so the planned bore has to match the issued approval.

What does BNSF Railway require from us for a Slaton bore?

A crossing under BNSF Railway in Slaton requires an agreement with the railroad that owns the track. The agreement sets details such as casing, depth and flagging. Since BNSF has 4.0 track miles within the city, the proposed alignment must be checked against the specific track crossing.

Who runs Slaton’s public water system, which uses purchased surface water?

Because the City of Slaton owns its public water system and uses purchased surface water, we confirm utility locations before planning underground work. It reports 2,176 service connections and 5,858 people served. For a water line near 9th Street, the existing system and marked utilities along the proposed route help shape the bore plan.

Who owns electric lines in Slaton and Lubbock County?

County records list Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric Cooperative as reporting electric service in Lubbock County. The provider for a particular Slaton address must be confirmed before conduit is planned. That check helps identify who owns the line and can confirm conduit specifications.

What bore sizes and lengths can Trinity handle near 9th Street in Slaton?

For a project near 9th Street in Slaton, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, soil and crossings determine how the equipment and plan fit the job.

How much 811 notice does a Slaton bore near Division Street need?

For work near Division Street, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days after the original notice, submit a new request. For Slaton work, we ask for worn or moved marks to be refreshed through Texas811 before work continues.

What affects the cost of a directional bore under US 84 in Slaton?

The price for a Slaton bore depends first on its ground and crossings: sandy clay loam, a US 84 crossing or BNSF Railway track can change the work involved. Length, pipe or conduit size, utility exposure, pavement, drainage, pits and excavator time also matter. Mobilization from Yukon is part of the review for this location.

Where the Slaton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Slaton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Slaton, Texas

Type the address of your job in Slaton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Slaton

Same county: Wolfforth · Shallowater · New Deal · Abernathy. All counties: Texas county list.