Directional Boring Contractors in Borden County, TX
Trinity Boring Solutions is a directional boring contractor serving Borden County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Gail. The Trinity main office in Yukon, Oklahoma is about 364 road miles from Gail, the county seat. Bores here most often pass under US 180 and the Colorado River. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Borden County, Texas
Type the address of your job in Borden County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Borden County?
Borden County covers 897 square miles, has about 557 residents and sits in the TxDOT Abilene District.
| County seat | Gail |
|---|---|
| Population | 557 (2024 Census estimate), down 11.4% since 2020 |
| Land area | 897 square miles |
| Largest cities and towns | No incorporated cities |
| TxDOT district | TxDOT Abilene District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Oncor Electric Delivery Company, Southwestern Public Service, Big Country Electric Cooperative and Lyntegar Electric Cooperative |
| Interstate and US highways | US 180 |
| Rivers | Colorado River |
| Creeks and other streams | Bull Creek, Gavett Creek, Grape Creek, Mesquite Creek, Hullem Creek, Rattlesnake Creek, Tobacco Creek and Wildcat Creek |
| Railroads | No main line track |
| Average precipitation | 19.4 inches a year (1991 to 2020) |
| Road distance from Trinity main office | About 364 miles from Yukon, Oklahoma to Gail |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Borden County?
A bore in Borden County most often has to cross US 180 and a stream such as the Colorado River, Bull Creek or Gavett Creek. The Census map names 24 larger streams in Borden County, led by Bull Creek, the Colorado River, Gavett Creek, Grape Creek, Mesquite Creek and Hullem Creek. The rest are Rattlesnake Creek, Tobacco Creek, Wildcat Creek, Little Bull Creek, Glen Creek, Wolf Creek, Fivemile Creek, Little Grape Creek, East Gavett Creek, Red Mud Creek, Willow Creek, Plum Creek, Salt Creek, Sand Creek, Buck Canyon Creek, Gopher Creek, Crooked Creek and Griffin Creek. There is no main line railroad in Borden County.

What Is the Ground Like for Directional Boring in Borden County?
Clay is the main thing to plan for in Borden County: the federal soil survey records a clay rich layer in the top five feet on about 53 percent of the county and bedrock within five feet on about 29 percent. For Borden County clay the drilling fluid is mixed to stop the cuttings from balling up behind the reamer. May is the wettest month in Borden County at 2.7 inches on average and January the driest at 0.7. Borden County averages 19.4 inches of precipitation a year, so the ground is usually dry at bore depth.
- Most common soils: Olton (13%), Vernon (13%) and Acuff (6%).
- Surface texture: most often clay loam (36%) or clay (18%).
- Bedrock within 5 feet: about 29% of the county. Most of it is soft, weathered rock.
- Caliche within 5 feet: about 7% of the county.
- Clay rich layer (35% clay or more) in the top 5 feet: about 53% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Borden County, Texas (survey area TX033, version 22, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Borden County?
The TxDOT Abilene District permits bores under state highways in Borden County, the Borden County Commissioners Court handles county roads.
- State highways. US 180, the other numbered state routes and the farm to market roads in Borden County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Water crossings. A bore under the Colorado River or Bull Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Borden County?
Oncor Electric Delivery Company, Southwestern Public Service, Big Country Electric Cooperative and Lyntegar Electric Cooperative serve Borden County, according to 2025 filings with the U.S. Energy Information Administration. Oncor Electric Delivery Company and Southwestern Public Service are investor owned utilities; Big Country Electric Cooperative and Lyntegar Electric Cooperative are member owned cooperatives. Conduit bored in Borden County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.
Is Borden County Growing?
The population of Borden County went from 629 in 2020 to 557 in 2024, a loss of 11.4 percent. In Borden County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.
Which Cities and Towns in Borden County Does Trinity Serve?
Borden County has no incorporated cities, so Trinity takes directional boring work in Gail and at rural sites, ranches and lease roads across the county.
Borden County borders Dawson County, Garza County, Howard County, Lynn County, Martin County, Mitchell County and Scurry County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Lamesa (Dawson), Post (Garza), Big Spring (Howard), Tahoka (Lynn), Stanton (Martin), Colorado City (Mitchell) and Snyder (Scurry).
Which Directional Boring Services Are Available in Borden County?
Every Trinity service is available in Borden County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including US 180 and Bull Creek
- Drinkable water line boring and sewer force mains in Gail and on rural water systems
- Underground conduit in Oncor Electric Delivery Company and Southwestern Public Service territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along US 180
The free Bore Planner sizes a Borden County job before you call.
Borden County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Gail, Texas?
Yes. Trinity Boring Solutions takes work in Gail and the rural parts of Borden County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under US 180 in Borden County?
The TxDOT Abilene District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Borden County Commissioners Court and city streets through the city.
Is there rock in Borden County?
Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 29 percent of Borden County, most of it soft, weathered rock. Caliche shows up within five feet on about 7 percent. Potholing confirms it on the actual bore path.
Can a line be bored under the Colorado River in Borden County?
Yes. A drill is steered below the bed of the Colorado River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Is Trinity insured for work in Borden County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Borden County?
Our price starts from a general range for the length and the pipe size. Depth, the crossings and the ground set the number, and heavy clay is a factor on many Borden County jobs.
How Do You Get a Bore Quote in Borden County?
Call (405) 409-7423 any time or send the address in Borden County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.