Directional Boring Contractors in Mills County, TX
Trinity Boring Solutions is a directional boring contractor serving Mills County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Goldthwaite and Mullin. Goldthwaite, the county seat, is about 356 road miles south of the Trinity main office in Yukon, Oklahoma. Bores here most often pass under US 183 and US 84, the Colorado River and BNSF Railway track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Mills County, Texas
Type the address of your job in Mills County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Mills County?
Mills County covers 748 square miles, has about 4,563 residents and sits in the TxDOT Brownwood District.
| County seat | Goldthwaite |
|---|---|
| Population | 4,563 (2024 Census estimate), up 2.4% since 2020 |
| Land area | 748 square miles |
| Largest cities and towns | Goldthwaite (1,767) and Mullin (128) |
| TxDOT district | TxDOT Brownwood District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative Association |
| Interstate and US highways | US 183 and US 84 |
| State Highways | 16 |
| Rivers | Colorado River |
| Creeks and other streams | Pecan Bayou, Browns Creek, Pompey Creek, Bennett Creek, Blanket Creek, Rough Creek, Cowhouse Creek and Elliott Creek |
| Railroads | BNSF Railway, about 34 main line miles |
| Average precipitation | 30.8 inches a year (1991 to 2020) |
| Road distance from Trinity main office | About 356 miles from Yukon, Oklahoma to Goldthwaite |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Mills County?
A bore in Mills County most often has to cross a highway such as US 183, US 84 or State Highway 16, a stream such as the Colorado River, Pecan Bayou or Browns Creek and BNSF Railway track. State Highways 16 also run through the county. The Census map names 25 larger streams in Mills County, led by the Colorado River, Pecan Bayou, Browns Creek, Pompey Creek, Bennett Creek and Blanket Creek. The rest are Rough Creek, Cowhouse Creek, Elliott Creek, North Simms Creek, South Bennett Creek, Rocky Creek, N Bennett Creek, Buffalo Creek, Prescott Creek, Nabors Creek, Mountain Creek, Mullin Creek, South Browns Creek, Willoughby Creek, Bull Creek, Crooked Run, Shaw Creek, Brushy Creek and Middle Bennett Creek. The federal rail map shows about 34 miles of main line track in Mills County, owned by BNSF Railway.

What Is the Ground Like for Directional Boring in Mills County?
Rock is the main thing to plan for in Mills County: the federal soil survey records bedrock within five feet of the surface on about 69 percent of the county, a mix of hard and soft, weathered rock. In Mills County the bore path is set around rock where that is possible, and rock tooling goes on the truck where it is not. May is the wettest month in Mills County at 4.3 inches on average and January the driest at 1.7. Mills County averages 30.8 inches of precipitation a year, so rain delays are occasional.
- Most common soils: Bolar (14%), Tarrant (10%) and Tarpley (8%).
- Surface texture: most often clay loam (18%) or gravelly clay loam (16%).
- Bedrock within 5 feet: about 69% of the county. It is a mix of hard rock and softer weathered rock.
- Clay rich layer (35% clay or more) in the top 5 feet: about 44% of the county.
- Gravelly, cobbly or stony surface soil: about 49% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Brown and Mills Counties, Texas (survey area TX602, version 23, September 8, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Mills County?
The TxDOT Brownwood District permits bores under state highways in Mills County, the Mills County Commissioners Court handles county roads, and Goldthwaite and Mullin each handle their own streets.
- State highways. US 183, US 84, the other numbered state routes and the farm to market roads in Mills County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under BNSF Railway track in Mills County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under the Colorado River or Pecan Bayou is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Mills County?
Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative Association serve Mills County, according to 2025 filings with the U.S. Energy Information Administration. Oncor Electric Delivery Company is an investor owned utility; Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative Association are member owned cooperatives. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in Mills County is planned. More on electric line boring for electric cooperatives.
Is Mills County Growing?
The population of Mills County went from 4,455 in 2020 to 4,563 in 2024, a gain of 2.4 percent. Bore work in Mills County is a mix of new services and replacement of older lines.
Which Cities and Towns in Mills County Does Trinity Serve?
Trinity takes directional boring work in all 2 incorporated places in Mills County and at sites outside city limits, and Goldthwaite is the largest with about 1,767 residents.
| City or town | 2024 population |
|---|---|
| Goldthwaite | 1,767 |
| Mullin | 128 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Mills County.
Mills County borders Brown County, Comanche County, Hamilton County, Lampasas County and San Saba County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Brownwood (Brown), Comanche (Comanche), Hamilton (Hamilton), Lampasas (Lampasas) and San Saba (San Saba).
Which Directional Boring Services Are Available in Mills County?
Every Trinity service is available in Mills County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including US 183, US 84 and the Colorado River
- Bores under BNSF Railway track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Goldthwaite or Mullin and on rural water systems
- Underground conduit in Oncor Electric Delivery Company and Comanche County Electric Cooperative Association territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along US 183
- Municipal boring services for cities such as Goldthwaite and Mullin
The free Bore Planner sizes a Mills County job before you call.
Mills County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Goldthwaite, Texas?
Yes. Trinity Boring Solutions takes work in Goldthwaite and Mullin and the rural parts of Mills County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under US 183 in Mills County?
The TxDOT Brownwood District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Mills County Commissioners Court and city streets through the city.
Is there rock in Mills County?
Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 69 percent of Mills County, a mix of hard and soft, weathered rock. Potholing confirms it on the actual bore path.
Can a line be bored under the Colorado River in Mills County?
Yes. A drill is steered below the bed of the Colorado River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Mills County?
BNSF Railway, with about 34 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Mills County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Mills County?
Trinity works from a general range based on length and pipe size. Depth, the crossings and the ground set the number, and rock is a factor on many Mills County jobs.
How Do You Get a Bore Quote in Mills County?
Call (405) 409-7423 any time or send the address in Mills County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.