Directional Boring Contractors in San Jacinto County, TX

Trinity Boring Solutions is a directional boring contractor serving San Jacinto County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Shepherd, Coldspring and Point Blank. From the Trinity main office in Yukon, Oklahoma it is about 433 road miles southeast to Coldspring, the county seat. Most San Jacinto County bores go under US 59 and US 190, the East Fork San Jacinto River and Union Pacific track. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in San Jacinto County, Texas

Type the address of your job in San Jacinto County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in San Jacinto County?

San Jacinto County covers 569 square miles, has about 29,326 residents and sits in the TxDOT Lufkin District.

County seatColdspring
Population29,326 (2024 Census estimate), up 7.0% since 2020
Land area569 square miles
Largest cities and townsShepherd (1,979), Coldspring (882) and Point Blank (691)
TxDOT districtTxDOT Lufkin District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesEntergy Texas and Sam Houston Electric Cooperative
Interstate and US highwaysUS 59 and US 190
State Highways150 and 156
State loops and spursLoop 424
RiversEast Fork San Jacinto River and Trinity River
Creeks and other streamsWinters Bayou, Peach Creek, Big Creek, Tarkington Bayou, Miller Creek, Rocky Creek, Palmetto Creek and Huffman Creek
LakesLivingston Reservoir
RailroadsUnion Pacific, about 14 main line miles
Average precipitation52.2 inches a year (1991 to 2020)
New housing units permitted523 in 2025
Road distance from Trinity main officeAbout 433 miles from Yukon, Oklahoma to Coldspring
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in San Jacinto County?

A bore in San Jacinto County most often has to cross a highway such as US 59, US 190 or State Highway 150, a stream such as the East Fork San Jacinto River, the Trinity River or Winters Bayou and Union Pacific track. State Highways 150 and 156 also run through the county, along with Loop 424. The Census map names 25 larger streams in San Jacinto County, led by the East Fork San Jacinto River, Winters Bayou, the Trinity River, Peach Creek, Big Creek and Tarkington Bayou. The rest are Miller Creek, Rocky Creek, Palmetto Creek, Huffman Creek, Boggy Creek, McCombs Creek, Gum Branch, East Carolina Creek, Jayhawker Creek, Henry Lake Branch, Sand Creek, Mussel Shoals Creek, Davison Bayou, Turkey Creek, Mill Creek, Pools Creek, West Fork, Nebletts Creek and Little Creek. Livingston Reservoir is the main mapped lake. The federal rail map shows about 14 miles of main line track in San Jacinto County, owned by Union Pacific.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in San Jacinto County?

Shallow groundwater is the main thing to plan for in San Jacinto County: the federal soil survey records a seasonal water table within five feet of the surface on about 44 percent of the county. On wet San Jacinto County ground the entry and exit pits are kept small and the bore is sealed with drilling fluid. October is the wettest month in San Jacinto County at 5.2 inches on average and February the driest at 3.6. San Jacinto County averages 52.2 inches of precipitation a year, so wet weather and water in the pits are planned for.

  • Most common soils: Pinetucky (11%), Conroe (7%) and Doucette (6%).
  • Surface texture: most often fine sandy loam (33%) or loamy fine sand (14%).
  • Bedrock within 5 feet: about 5% of the county. Most of it is soft, weathered rock.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 25% of the county.
  • Sandy layer (70% sand or more) in the top 5 feet: about 40% of the county.
  • Seasonal water table within 5 feet: about 44% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Polk and San Jacinto Counties, Texas (survey area TX617, version 25, September 8, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in San Jacinto County?

The TxDOT Lufkin District permits bores under state highways in San Jacinto County, the San Jacinto County Commissioners Court handles county roads, and Shepherd, Coldspring and Point Blank each handle their own streets.

  • State highways. US 59, US 190, the other numbered state routes and the farm to market roads in San Jacinto County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Railroads. A bore under Union Pacific track in San Jacinto County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
  • Water crossings. A bore under the East Fork San Jacinto River, the Trinity River, Winters Bayou or Livingston Reservoir is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve San Jacinto County?

Entergy Texas and Sam Houston Electric Cooperative serve San Jacinto County, according to 2025 filings with the U.S. Energy Information Administration. Entergy Texas is an investor owned utility; Sam Houston Electric Cooperative is a member owned cooperative. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in San Jacinto County is planned. More on electric line boring for electric cooperatives.

How Much New Construction Is There in San Jacinto County?

San Jacinto County permitted 523 new housing units in 2025, 519 of them single family homes, according to the Census Bureau Building Permits Survey. The population of San Jacinto County went from 27,400 in 2020 to 29,326 in 2024, a gain of 7.0 percent. That pace of building in San Jacinto County puts new water, gas, electric and fiber services under finished pavement.

Which Cities and Towns in San Jacinto County Does Trinity Serve?

Trinity takes directional boring work in all 3 incorporated places in San Jacinto County and at sites outside city limits, and Shepherd is the largest with about 1,979 residents.

City or town2024 population
Shepherd1,979
Coldspring882
Point Blank691

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside San Jacinto County.

San Jacinto County borders Liberty County, Montgomery County, Polk County, Trinity County and Walker County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Liberty (Liberty), Conroe (Montgomery), Livingston (Polk), Groveton (Trinity) and Huntsville (Walker).

Which Directional Boring Services Are Available in San Jacinto County?

Every Trinity service is available in San Jacinto County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a San Jacinto County job before you call.

San Jacinto County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Coldspring, Texas?

Yes. Trinity Boring Solutions takes work in Shepherd, Coldspring and Point Blank and the rural parts of San Jacinto County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 59 in San Jacinto County?

The TxDOT Lufkin District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the San Jacinto County Commissioners Court and city streets through the city.

Is there rock in San Jacinto County?

Not much. The federal soil survey records bedrock within five feet of the surface on about 5 percent of San Jacinto County. Potholing confirms it on the actual bore path.

Can a line be bored under the East Fork San Jacinto River in San Jacinto County?

Yes. A drill is steered below the bed of the East Fork San Jacinto River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Which railroads have track in San Jacinto County?

Union Pacific, with about 14 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.

Is Trinity insured for work in San Jacinto County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in San Jacinto County?

Length and pipe size give us a general range. Depth, the crossings and the ground set the number, and shallow groundwater is a factor on many San Jacinto County jobs.

How Do You Get a Bore Quote in San Jacinto County?

Call (405) 409-7423 any time or send the address in San Jacinto County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.