trinityboringsolutions.com

Point Blank Texas Directional Boring: Woodville Fine Sandy Loam, US 190 and Mill Creek

Quick Answer: Along US 190, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines routed beneath roads in Point Blank. The Yukon, Oklahoma main office is 411 road miles away, so mobilization is part of planning near Texas State Highway 156. USDA maps Woodville soil across 63 percent of Point Blank, with fine sandy loam near the surface and clay common around 40 inches down. That clay can cling to a reamer, so staged reaming helps keep a bore moving.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Point Blank bores at a glance

  • Incorporated city in San Jacinto County, Texas. Population 691 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 411 miles, about 7.9 hours of driving.
  • Ground: Woodville soil is mapped on 63 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 190 and Texas State Highway 156. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Mill Creek and Mc Gee Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does Trinity take directional boring jobs near Point Blank and US 190?

In Point Blank, the USDA soil survey maps fine sandy loam near the surface and clay at 40 inches, while the geologic map shows clay and sandstone; we take directional boring work along US 190. The Census Bureau Vintage 2024 estimate puts the city at 691 people, up from a 2020 base of 645. We can place water, sewer, gas, electric conduit or fiber beneath Counts Road and other Point Blank routes.

Our main office is in Yukon, Oklahoma, and Point Blank work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and directional boring has been part of our work since 1982. For routes under US 190 or Counts Road, our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Point Blank Woodville soil indicate?

Woodville is the leading mapped soil series in Point Blank, covering 63 percent of the city, and the USDA soil survey shows Woodville fine sandy loam on 34 percent at 5 to 12 percent slopes and 30 percent at 1 to 5 percent slopes. Across the mapped surface, fine sandy loam accounts for 70 percent and loamy fine sand for 15 percent. At about 40 inches, clay is mapped across 70 percent of the area, with average clay content of 41 percent; that deeper sticky layer can load a reamer even where the surface cuts easily.

USDA soil survey, inside the Point Blank city limitsWhat is mapped
Soil series mappedWoodville 63 percent, Betis 14 percent, Leggett 6 percent, Hatliff 5 percent and Wiergate 4 percent
Texture at the surfacefine sandy loam 70 percent, loamy fine sand 15 percent and clay 7 percent
Texture about 40 inches downclay 70 percent, loamy fine sand 14 percent and sandy clay loam 7 percent
Engineering class about 40 inches downfat clay (CH) 70 percent, silty sand (SM) 15 percent and lean clay (CL) 6 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches71 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel76 percent of the area

For routes near Mill Creek, USDA mapping leaves bedrock unshown in Point Blank’s top five feet, although the geologic map identifies Massive Clay Decomposition Residuum of Cenozoic age and the Miocene Fleming Formation. The survey maps a seasonal water table within 60 inches across 71 percent and flood prone soils across 6 percent, so creek routes need careful depth and water planning. High steel corrosion risk covers 76 percent of mapped area; the line owner should consider casing and tracer wire material, while HDPE avoids that steel concern.

How should we bore Point Blank clay?

Point Blank’s Woodville soil can shift from fine sandy loam near the surface to sticky clay below. We adjust fluid and reaming to the ground, and plan around Mill Creek and the area’s shallow seasonal water table.

  1. In Point Blank’s clay mapped around 40 inches, we use controlled fluid and staged reaming to limit sticky buildup on the reamer.
  2. With a seasonal water table mapped within 60 inches across much of Point Blank, we keep pits small and pump water where needed.
  3. Near Mill Creek, we plan the bore depth around the channel and check whether the crossing needs review for Corps jurisdiction.
  4. Along Counts Road, marked utilities on the bore path are exposed with hydrovac before drilling gets close; a walkover locator tracks depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross in Point Blank near Counts Road?

US 190 has 1.8 mapped roadway miles inside Point Blank, and Texas State Highway 156 has 1.4, so a route under either highway needs a planned bore path and the required TxDOT review. Counts Road is the longest named street at 1.31 miles in the city. Sam Houston Drive and Gov Wood Drive each have 0.79 miles mapped, giving service routes more than one street corridor to consider. Boring keeps pavement and driveways intact where the alignment can pass below them.

CrossingTypeMapped extentWho has a say
US 190US highway1.8 roadway miles insideState highway office
Texas State Highway 156State highway1.4 roadway miles insideState highway office
Mill CreekStream0.47 channel miles insideChecked for Corps of Engineers jurisdiction
Mc Gee CreekStream0.2 channel miles insideChecked for Corps of Engineers jurisdiction
Cedar Lick BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Dobbins CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Big Spring CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
McGee CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Livingston ReservoirLake or pond34,837 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The mapped inventory shows no railroad inside Point Blank or within 1 mile beyond it, and no mapped street to rail intersection, so local route planning centers on roads and water. Mill Creek runs 0.47 channel miles in the city and Mc Gee Creek 0.2; two mapped street crossings of named streams make creek approaches a practical design issue. Livingston Reservoir, at 34,837 acres, is also inside the limits, so any lake crossing needs review during planning.

Who has to sign off on Point Blank work in San Jacinto County?

Point Blank is incorporated, so its city streets are under the city’s control, while US 190 and Texas State Highway 156 are TxDOT routes reviewed by the Lufkin District. For work in either highway right of way, the utility owner applies through TxDOT’s RULIS system; we prepare the bore plan and profile and work under that owner’s permit. Existing highway pavement is bored or tunneled, and the permit sets the applicable cover depth. Mill Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. No railroad is mapped in the area, but a route involving railroad track needs an agreement with the track owner.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Point Blank, San Jacinto County?

EPA drinking water records cannot identify the water provider for a specific Point Blank address, so confirm it with the city, county or local water district before planning a bore. Entergy Texas and Sam Houston Electric Cooperative report electric service in San Jacinto County, but that does not identify the owner at every address. We confirm the line owner before planning an electric conduit bore near US 190 or a local street.

Line ownerWhat it isSourceSize
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in San Jacinto CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates place Point Blank’s median housing year at 1982; we base bore planning on route conditions, not home age. Point Blank’s estimates put 1 percent of homes built before 1960, 82 percent from 1960 to 1999, and 17 percent in 2000 or later; we plan bores by route conditions. That mix can mean work on an older service as well as a new connection near Northwood Drive. We hydrovac pothole marked utilities on the bore path before drilling near them, since paint shows position but not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Point Blank and Oakhurst?

Point Blank is in San Jacinto County, covers 2.02 square miles and sits at an elevation of 208 feet. For service around Counts Road, ZIP code 77364 serves Point Blank; we use the project address to confirm the route before planning a bore. Oakhurst is 5.8 miles west, Onalaska is 8.0 miles northeast, and Cape Royale is 8.2 miles southeast. West Livingston, the nearest larger city, is 11.9 miles east, while county seat Coldspring is 12.0 miles southeast. The Yukon yard is 411 road miles away, a drive of 7.9 hours, which affects mobilization for work near Counts Road.

Places near Point Blank

What boring work comes up in Point Blank near Gov Wood Drive?

  • Highway crossing: A line under US 190 needs a bore route planned for TxDOT review and the pavement left intact.
  • Water service: A service under Gov Wood Drive needs the address specific water provider confirmed before the route is set.
  • Fiber conduit: A fiber run beneath Counts Road can avoid cutting its street surface when the pits fit on either side.
  • Creek crossing: A route under Mill Creek needs depth planning for the channel and a check for Corps jurisdiction.
  • Lake crossing: A Livingston Reservoir route needs crossing review and a plan that accounts for the 34,837 acre lake.
  • Electric conduit: Near Texas State Highway 156, confirm the line owner before choosing the conduit bore path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Point Blank bore near Northwood Drive?

For a Point Blank quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help show the route near Northwood Drive. The location of marked utilities and the planned tie in matter because they determine where pits and access can fit.

Mobilization starts with the 411 road miles from Yukon, then the ground along the Point Blank route shapes the work. Woodville fine sandy loam over clay can affect reaming and fluid needs. A crossing of US 190 or Texas State Highway 156 brings right of way planning into the scope, while Mill Creek adds a water crossing to assess. Pipe size, length, utility exposures, pavement, pits, backfill and emergency timing also affect the job.

Questions people ask about boring in Point Blank

Does Trinity take directional boring work in Point Blank, San Jacinto County, and who staffs it?

Yes, we take Point Blank work in San Jacinto County, with our own crews and vetted partner contractor crews available through our satellite yard model. Along Sam Houston Drive, we coordinate with Trinity from the first call through the bore log, regardless of which crew is on site. For a route under US 190, we plan the job from the address and scope.

Could a Point Blank bore along US 190 encounter rock?

The USDA soil survey does not map bedrock within Point Blank’s top five feet, which does not rule out rock deeper down. The geologic map identifies Massive Clay Decomposition Residuum and the Miocene Fleming Formation, mapped as clay and sandstone. A route near Mill Creek still needs conditions checked at the planned bore depth.

Who approves a bore under US 190 in Point Blank, and which TxDOT office reviews it?

TxDOT reviews work in the US 190 right of way through its Lufkin District. The utility owner submits the application in TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. The permit covers the route and required depth for the highway crossing.

Can a line be bored under Mill Creek in Point Blank?

A bore can be planned under Mill Creek, which has 0.47 channel miles mapped inside Point Blank. The route needs depth planning beneath the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Nearby seasonal water table conditions can also affect pits and drilling fluid.

Who owns electric lines in Point Blank, San Jacinto County, and who confirms conduit details?

Entergy Texas and Sam Houston Electric Cooperative report electric service in San Jacinto County, but the owner for a particular Point Blank address must be confirmed before a conduit bore. That confirmation identifies whom to contact about conduit specifications. We also expose marked lines on a route near Counts Road before drilling close to them.

Does the city control Gov Wood Drive in Point Blank, and must the street be cut?

Point Blank is incorporated, so Gov Wood Drive is a city street. A directional bore can pass below the street without opening its pavement when the route and pit locations allow. Marked utilities along the bore path are exposed before the drill approaches them, because surface paint does not show burial depth.

Does Trinity cover Oakhurst and rural sites outside Point Blank?

We take work in Point Blank, nearby Oakhurst and rural locations beyond the city limits. Oakhurst is 5.8 miles west, and routes outside the city can have different access and utility conditions from a bore under Counts Road. Send the address or map pin so we can review the location and scope.

How much notice does Texas811 need for a Point Blank bore along Counts Road, and what if marks move?

For a bore along Counts Road, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. When a bore near US 190 slips more than 14 days past the original notice, we make a new request. Before continuing a bore near Mill Creek, we have worn or moved marks refreshed through Texas811.

What affects the cost of directional boring under US 190 in Point Blank?

The price depends on the specific US 190 route, not just its length. Relevant factors include pipe size, footage, Woodville soil and clay, utilities to expose, pavement, pits, creek crossings and access. Mobilization also matters because Point Blank is 411 road miles from the Yukon yard. The job plan determines which factors apply.

Where the Point Blank facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Point Blank

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Point Blank, Texas

Type the address of your job in Point Blank. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Point Blank

Same county: Shepherd · Coldspring. All counties: Texas county list.