Directional Boring Contractors in Taylor County, TX

Trinity Boring Solutions is a directional boring contractor serving Taylor County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Abilene, Merkel, Tye, Tuscola, Buffalo Gap and Lawn. From the Trinity main office in Yukon, Oklahoma it is about 295 road miles southwest to Abilene, the county seat. The usual crossings in Taylor County are Interstate 20 and US 84, Elm Creek and BNSF Railway track. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Taylor County, Texas

Type the address of your job in Taylor County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Taylor County?

Taylor County covers 916 square miles, has about 148,813 residents and sits in the TxDOT Abilene District.

County seatAbilene
Population148,813 (2024 Census estimate), up 3.9% since 2020
Land area916 square miles
Largest cities and townsAbilene (124,702), Merkel (2,494), Tye (1,241), Tuscola (847) and Buffalo Gap (633)
TxDOT districtTxDOT Abilene District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesAEP Texas North and Taylor Electric Cooperative
Interstate and US highwaysInterstate 20, US 84, US 83 and US 277
State Highways36 and 351
State loops and spursLoop 322
Creeks and other streamsElm Creek, Cedar Creek, Mulberry Creek, Jim Ned Creek, Little Elm Creek, Bull Wagon Creek, Bluff Creek and Lytle Creek
LakesLake Abilene, Kirby Lake and Lytle Lake
RailroadsBNSF Railway, Union Pacific and short line railroads, about 79 main line miles
Average precipitation25.5 inches a year (1991 to 2020)
New housing units permitted1,057 in 2025
Road distance from Trinity main officeAbout 295 miles from Yukon, Oklahoma to Abilene
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Taylor County?

A bore in Taylor County most often has to cross a highway such as Interstate 20, US 84 or US 83, a stream such as Elm Creek or Cedar Creek and BNSF Railway or Union Pacific track. State Highways 36 and 351 also run through the county, along with Loop 322. The Census map names 25 larger streams in Taylor County, led by Elm Creek, Cedar Creek, Mulberry Creek, Jim Ned Creek, Little Elm Creek and Bull Wagon Creek. The rest are Bluff Creek, Lytle Creek, Cat Claw Creek, Red Bank Creek, Indian Creek, Buttonwillow Creek, Gray Branch Jim Ned Creek, Little Bitter Creek, Mill Creek, Valley Creek, Bulger Creek, Rainey Creek, Buck Creek, Cottonwood Creek, Buffalo Creek, Elmont Creek, Twomile Creek, Noodle Creek and Pat Powers Cove Mulberry Creek. Lake Abilene, Kirby Lake and Lytle Lake are the main mapped lakes. The federal rail map shows about 79 miles of main line track in Taylor County: BNSF Railway about 39 miles, Union Pacific about 31 and short line and other operators about 9.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Taylor County?

Clay is the main thing to plan for in Taylor County: the federal soil survey records a clay rich layer in the top five feet on about 53 percent of the county and bedrock within five feet on about 29 percent. Clay in Taylor County swells and sticks when wet, so the drilling fluid is mixed to keep cuttings moving. May is the wettest month in Taylor County at 3.3 inches on average and January the driest at 1.1. Taylor County averages 25.5 inches of precipitation a year, so rain delays are occasional.

  • Most common soils: Sagerton (16%), Oplin (11%) and Rotan (5%).
  • Surface texture: most often clay loam (37%) or clay (13%).
  • Bedrock within 5 feet: about 29% of the county. Most of it is hard rock. Rock outcrop is mapped on about 3%.
  • Caliche within 5 feet: about 7% of the county.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 53% of the county.
  • Gravelly, cobbly or stony surface soil: about 13% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Taylor County, Texas (survey area TX441, version 22, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Taylor County?

The TxDOT Abilene District permits bores under state highways in Taylor County, the Taylor County Commissioners Court handles county roads, and Abilene, Merkel and Tye each handle their own streets.

  • State highways. Interstate 20, US 84, US 83, US 277, the other numbered state routes and the farm to market roads in Taylor County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Railroads. A bore under BNSF Railway, Union Pacific or short line track in Taylor County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
  • Water crossings. A bore under Elm Creek or Lake Abilene is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Taylor County?

AEP Texas North and Taylor Electric Cooperative serve Taylor County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas North is an investor owned utility; Taylor Electric Cooperative is a member owned cooperative. Knowing which one holds the territory at the address is the first step on a conduit bore in Taylor County. More on electric line boring for electric cooperatives.

How Much New Construction Is There in Taylor County?

Taylor County permitted 1,057 new housing units in 2025, 731 of them single family homes, according to the Census Bureau Building Permits Survey. The population of Taylor County went from 143,238 in 2020 to 148,813 in 2024, a gain of 3.9 percent. New subdivisions in Taylor County mean service lines bored under streets and driveways that are already paved.

Which Cities and Towns in Taylor County Does Trinity Serve?

Trinity takes directional boring work in all 8 incorporated places in Taylor County and at sites outside city limits, and Abilene is the largest with about 124,702 residents.

City or town2024 population
Abilene124,702
Merkel2,494
Tye1,241
Tuscola847
Buffalo Gap633
Lawn315
Trent295
Impact21

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Taylor County.

Taylor County borders Callahan County, Coleman County, Fisher County, Jones County, Nolan County and Runnels County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Baird (Callahan), Coleman (Coleman), Roby (Fisher), Anson (Jones), Sweetwater (Nolan) and Ballinger (Runnels).

Which Directional Boring Services Are Available in Taylor County?

Every Trinity service is available in Taylor County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Taylor County job before you call.

Taylor County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Abilene, Texas?

Yes. Trinity Boring Solutions takes work in Abilene, Merkel, Tye, Tuscola, Buffalo Gap and Lawn and the rural parts of Taylor County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under Interstate 20 in Taylor County?

The TxDOT Abilene District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Taylor County Commissioners Court and city streets through the city.

Is there rock in Taylor County?

Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 29 percent of Taylor County, most of it hard rock. Caliche shows up within five feet on about 7 percent. Potholing confirms it on the actual bore path.

Can a line be bored under Elm Creek in Taylor County?

Yes. A drill is steered below the bed of Elm Creek from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Which railroads have track in Taylor County?

BNSF Railway, Union Pacific and short line operators, with about 79 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.

Is Trinity insured for work in Taylor County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Taylor County?

Trinity works from a general range based on length and pipe size. Depth, the crossings and the ground set the number, and heavy clay is a factor on many Taylor County jobs.

How Do You Get a Bore Quote in Taylor County?

Call (405) 409-7423 any time or send the address in Taylor County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.