Bellville Texas Directional Boring: Tremona Loamy Fine Sand, Boggy Creek, BNSF Railway
Quick Answer: Main Street, Holland Street and Front Street run among Bellville’s longest routes, within 49.52 public road miles, while Texas State Highway 36 and Texas State Highway 159 meet in town. We take directional boring, also called horizontal directional drilling (HDD), for crossings on those Bellville roads and highways. Bellville is 431 road miles from our Yukon, Oklahoma main office, and BNSF Railway track and Boggy Creek add crossing constraints. At 40 inches, the USDA soil survey maps clay across 45 percent of the area, so sticky ground can load a reamer and call for staged passes.
Bellville bores at a glance
- County seat of Austin County, Texas. Population 4,291 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 431 miles, about 8.5 hours of driving.
- Ground: Tremona soil is mapped on 27 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: Texas State Highway 36, Texas State Highway 159, FM 1456, FM 2429 and FM 529. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: BNSF Railway, with 4 mapped street and rail crossings.
- Named streams inside the boundary: Boggy Creek.
- Public water: City of Bellville, groundwater wells.
- Electric: City of Bellville municipal electric system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Main Street in Bellville?
Main Street, Holland Street and Front Street sit within Bellville’s 49.52 public road miles, alongside Texas State Highway 36 and Texas State Highway 159. Bellville is the incorporated county seat of Austin County, with 4,291 residents in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber along streets such as Main Street or across Boggy Creek where a buried route is needed.
Our main office is in Yukon, Oklahoma, and Bellville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa; a Bellville job beside Main Street is typically a utility crossing planned around its actual footage and ground. Our family business began in 1965 and has drilled directionally since 1982.

What kind of ground does Tremona soil indicate in Bellville?
The USDA soil survey maps Tremona as 27 percent of Bellville’s soil series, with Tremona loamy fine sand on 17 percent of the mapped area at 1 to 5 percent slopes and 10 percent at 5 to 8 percent slopes. Surface texture is loamy fine sand across 56 percent, while at about 40 inches the survey maps clay across 45 percent and loamy fine sand across 22 percent. These are mapped soil patterns, not test borings. Sand can cave behind a drill head, while the deeper clay can cling to a reamer and grip the pipe.
| USDA soil survey, inside the Bellville city limits | What is mapped |
|---|---|
| Soil series mapped | Tremona 27 percent, Catilla 19 percent, Frelsburg 12 percent, Mabank 8 percent and Straber 7 percent |
| Texture at the surface | loamy fine sand 56 percent, fine sandy loam 20 percent and clay 13 percent |
| Texture about 40 inches down | clay 45 percent, loamy fine sand 22 percent and sandy clay loam 20 percent |
| Engineering class about 40 inches down | lean clay (CL) 42 percent, fat clay (CH) 36 percent and silty sand (SM) 22 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 31 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 69 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 1 percent of Bellville and a seasonal water table within 60 inches in 31 percent. That water can fill pits, so Boggy Creek routes need attention to pit size and pumping. Flood prone soils cover 2 percent of the mapped area, and high steel corrosion risk covers 69 percent, a concern for uncoated casing and tracer wire. The geologic map shows the Pliocene Willis Formation, which includes clay, silt, sand and gravel; changing layers can affect drilling conditions.
How do we drill through Bellville clay and sandy soil?
Tremona loamy fine sand and deeper clay call for different fluid and reaming choices. We plan the Bellville bore around the mapped ground, the crossing and the position of existing lines.
- In Bellville’s loamy fine sand, we use drilling fluid to support the hole, ream in stages and have the pipe ready before the final pass.
- Where the survey maps clay at about 40 inches, thinner fluid and polymer can limit sticky buildup; staged reaming helps keep the hole workable.
- With a seasonal water table mapped within 60 inches across 31 percent of the area, we keep pits compact and pump water when needed.
- Before a bore near a Bellville street or Boggy Creek, we pothole marked utilities, then track the drill head and log depth and pitch.

Which Bellville roads, tracks or creeks include Texas State Highway 36?
Texas State Highway 36 accounts for 3.8 mapped roadway miles inside Bellville, and Texas State Highway 159 accounts for 2.6. FM 1456, FM 2429 and FM 529 also run within the city limits. Main Street is the longest named street at 2.09 miles, followed by Holland Street at 1.68 miles and Front Street at 1.64 miles. A bore near these routes has to fit the road corridor and the proposed line path; boring beneath pavement avoids cutting the surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 36 | State highway | 3.8 roadway miles inside | State highway office |
| Texas State Highway 159 | State highway | 2.6 roadway miles inside | State highway office |
| FM 1456 | State highway | 0.6 roadway miles inside | State highway office |
| FM 2429 | State highway | 0.3 roadway miles inside | State highway office |
| FM 529 | State highway | 0.3 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 1.7 track miles inside | The railroad |
| Boggy Creek | Stream | 1.07 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Piney Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Dry Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 1.7 track miles in Bellville, with four mapped street and rail crossings in the city. A route near the track needs to account for the railroad crossing process. Boggy Creek runs 1.07 channel miles inside the limits, and six mapped street crossings cross named streams. A creek route needs depth planning below the channel and a check for federal water jurisdiction. No lakes or ponds are mapped within one mile of the city.
Do Bellville bores near BNSF Railway need approval?
Bellville’s city streets belong to the city, while work in the right of way of Texas State Highway 36, Texas State Highway 159 or a farm to market road needs a TxDOT utility permit. The utility owner, not our drilling crew, files through TxDOT’s online RULIS system for review by the Yoakum District; we prepare the bore plan and profile for that filing. For electric and communication lines, cover is at least 60 inches below the lowest crossed grade and 48 inches along the right of way. Water requires 60 inches at crossings and 36 inches along the right of way; pressurized sewer crossings require 60 inches. The permit can set other depths.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Austin County and Bellville?
The City of Bellville public water system uses groundwater wells and reports 2,391 service connections serving 4,206 people. Bellville also owns its municipal electric system. Before a conduit bore near a city water line or electric route, we expose marked utilities with hydrovac potholing so the drill path can be checked against the actual line depth, not just paint on the surface.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Bellville | Public water system | Groundwater wells | 2,391 connections, 4,206 people served |
| City of Bellville municipal electric system | City owned electric system | Reports to the U.S. Energy Information Administration | 2,595 customers reported |
| CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and San Bernard Electric Cooperative | Electric utilities reporting service in Austin County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Bellville’s median housing year at 1969. The estimates show 36 percent of homes built before 1960, 47 percent from 1960 to 1999 and 17 percent from 2000 onward. A route near Main Street could serve replacement work in older blocks or a newer service connection; we pothole marked lines before drilling near them to verify their depth and position.

Do you cover Bellville and nearby San Felipe?
Bellville is the county seat of Austin County, at an elevation of 238 feet and covering 2.72 square miles. Its ZIP code is 77418. San Felipe is 13.9 miles southeast, as is Sealy; Industry is 14.3 miles west, and Brenham, the nearest larger city, is 16.7 miles northwest. From our Yukon, Oklahoma main office, Bellville is 431 road miles and an 8.5 hour drive. That distance is part of planning crew mobilization for a bore near Texas State Highway 36 or Boggy Creek.
Places near Bellville
- Directional boring in Sealy: 13.9 miles southeast
- Directional boring in San Felipe: 13.9 miles southeast
- Directional boring in Industry: 14.3 miles west
- Directional boring in New Ulm: 14.9 miles west
- Directional boring in Hempstead: 15.2 miles northeast
- Directional boring in Brenham: 16.7 miles northwest
What would we bore near Front Street in Bellville?
- Highway crossing: A bore below Texas State Highway 36 can keep the pavement intact, with the route and cover addressed in the TxDOT permit.
- Water service: A connection near Main Street can tie into the City of Bellville groundwater system after existing water lines are located and exposed.
- Fiber route: A conduit bore along Front Street can avoid open cuts across pavement and sidewalks while crossing Bellville’s built up street corridors.
- Creek crossing: A Boggy Creek bore needs a planned path below the channel and a jurisdiction check during planning.
- Rail crossing: A route at one of Bellville’s BNSF Railway street crossings needs the railroad’s agreement and its requirements for the crossing.
- Drainage crossing: A bore near Bellville’s unnamed drainage channels needs a route that accounts for local water flow and any marked utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Mechanic Street in Bellville?
For a Mechanic Street quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans can show the route. Note any nearby crossing, such as BNSF Railway or Boggy Creek, so we can assess the path and access before setting the scope.
A clear route beside Main Street with known line locations is simpler to plan than a path with several exposed utilities or pavement crossings. The quote depends on length, pipe size, Tremona sand and deeper clay, utilities to cross, pavement, pits and excavator time. A Boggy Creek crossing can add drainage planning, while BNSF Railway brings a separate crossing process. Mobilization also matters because Bellville is 431 road miles from Yukon; emergency or high profile work can change the scope.
Questions people ask about boring in Bellville
Does Trinity Boring Solutions take jobs in Bellville and Austin County?
Yes. We take directional boring work in Bellville, Austin County, with our own crews and partner contractor satellite yards that we have vetted. You work with Trinity from the first call through the bore log, regardless of which crew is on site. A route near Main Street or Boggy Creek can be scoped from its location, line size and footage.
Can groundwater near Boggy Creek cause trouble for Bellville bore pits?
It can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches across 31 percent of Bellville, so a pit near Boggy Creek may need pumping and a compact layout. Wet sandy soil can also flow into an excavation. We account for the route and ground conditions before choosing pit locations.
Does Tremona soil in Bellville corrode steel, and what pipe should I use?
The survey maps high steel corrosion risk across 69 percent of Bellville, which raises a concern for uncoated steel casing and tracer wire. The line owner selects any coating. HDPE is not subject to that soil corrosion concern. Tremona loamy fine sand is widely mapped in town, but the proposed route and pipe material should guide the final choice.
What ground will a bore pass through near Tremona soil in Bellville?
The USDA soil survey maps Tremona loamy fine sand across parts of Bellville, with clay mapped across 45 percent of the area at about 40 inches. Sand can loosen behind the drill, while clay can stick to the reamer. These mapped patterns are not test borings, so the actual material along a route near Main Street may vary.
Will a Bellville bore hit rock?
The USDA soil survey maps bedrock within 60 inches in only 1 percent of Bellville, and within 40 inches in none of the mapped area; deeper rock is still possible. The geologic map identifies the Pliocene Willis Formation, which includes clay, silt, sand and gravel. Those changing materials can affect the drilling approach along a local route.
Who approves a bore under Texas State Highway 36 in Bellville?
The line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Yoakum District reviews work on Texas State Highway 36. We provide the plan and profile for the owner’s filing. Cover requirements depend on line type, and the issued permit can call for a different depth than the standard rule.
What bore sizes and lengths can you handle near Mechanic Street in Bellville?
We handle lines from 3/4 inch service sizes up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Mechanic Street still depends on the route, ground and crossings, including any marked utilities. Send the proposed footage and pipe or conduit size so we can assess the scope.
How early should I call Texas811 for a bore on Main Street in Bellville?
The locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work begins. If a Main Street start slips more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a directional bore near Texas State Highway 36 in Bellville?
The route length and pipe size matter, as do the clay and sand, pavement, utilities to expose, pits, excavator time and any drainage crossing. A job beside Texas State Highway 36 may need highway permitting and specified cover. Work near Boggy Creek or BNSF Railway adds crossing details, and Bellville’s distance from Yukon affects mobilization.
Where the Bellville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bellville
- U.S. Census Bureau, TIGER/Line 2024: Bellville boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Bellville
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bellville housing units and year built
- Macrostrat geologic map compilation: map units under Bellville
- U.S. EPA Safe Drinking Water Information System: public water systems serving Bellville
- U.S. Department of Transportation, North American Rail Network: track owners in Austin County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Austin County
- U.S. Geological Survey, Elevation Point Query Service: Bellville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bellville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bellville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bellville, Texas
Type the address of your job in Bellville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bellville
Same county: Wallis · Brazos Country · South Frydek. All counties: Texas county list.
