trinityboringsolutions.com

Wallis Texas Directional Boring: Verland Clay, Texas State Highway 36, Elm Slough

Quick Answer: Texas State Highway 36 and the BNSF Railway are major crossings for a Wallis utility bore, and we do directional boring, also called horizontal directional drilling (HDD), here. Wallis is 457 road miles from our Yukon, Oklahoma main office, so work near Railroad Street needs mobilization planned with the route. Verland soil and clay below the surface can stick to the reamer and grip pipe. We adjust the drilling fluid and ream in stages to suit that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Wallis bores at a glance

  • Incorporated city in Austin County, Texas. Population 1,360 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 457 miles, about 9 hours of driving.
  • Ground: Verland soil is mapped on 66 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 36, FM 1093, Texas State Highway 60 and FM 1952. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Elm Slough.
  • Public water: City of Wallis, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for boring near Texas State Highway 36 in Wallis?

We take directional boring work in Wallis, Austin County, where the Census Bureau Vintage 2024 estimate puts the population at 1,360. A water service near Railroad Street, sewer under Commerce Street, or electric conduit and fiber along Texas State Highway 36 each needs a route planned around existing lines and crossings. Tell us what line you need and where it has to run.

Our main office is in Yukon, Oklahoma, and Wallis work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For directional boring in Wallis, we are a family business that started in 1965 and have done directional boring since 1982. That experience covers small service lines and larger casing, including work planned around the BNSF Railway through Wallis.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Verland soil mean for a bore in Wallis?

The USDA soil survey maps Verland soil across 66% of Wallis and Lake Charles soil across 33%. Verland clay loam, on 0 to 1 percent slopes, is the largest mapped unit; Lake Charles clay is also mapped on nearly level ground. At about 40 inches below the surface, the survey maps clay across 99% of the area, with an average clay content of 52%. This is a mapped pattern, not a test boring. Sticky clay can ball up on a reamer and swell around pipe, so the drilling fluid and reaming pace need care.

USDA soil survey, inside the Wallis city limitsWhat is mapped
Soil series mappedVerland 66 percent and Lake Charles 33 percent
Texture at the surfaceclay loam 66 percent and clay 33 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 99 percent
Average clay content about 40 inches down52 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches66 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Bedrock is not mapped in the top five feet of Wallis, but the geologic map shows the Beaumont Formation, a Pleistocene unit described as predominantly clay. The USDA soil survey maps a seasonal water table within 60 inches across 66% of the area, so pits near Elm Slough may need pumping. For underground planning in Wallis, flood prone soils are not mapped, leaving that local soil information unavailable. High steel corrosion risk is mapped across 99% of the area, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil corrosion concern.

How do we drill Wallis clay without damaging streets or lines?

Wallis clay can hold an open hole but may cling to the reamer and grip the pipe. Near Texas State Highway 36 and Elm Slough, we plan the bore path, fluid and pullback around the mapped ground and nearby crossings.

  1. We check the planned route near Texas State Highway 36, review utility marks and hydrovac pothole every marked line before the drill gets close.
  2. With Wallis clay, we use thinner drilling fluid with polymer and ream in stages to limit clay buildup and reduce the chance of pipe gripping.
  3. Because the mapped seasonal water table reaches within 60 inches across 66% of Wallis, we keep pits small and pump them if water collects.
  4. For a marked line under Gresham Street, we pothole to verify its depth before drilling nearby; surface paint alone does not show how deep it sits.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What is in the way of a new line in Wallis near BNSF Railway?

Texas State Highway 36 has 1.6 mapped roadway miles inside Wallis. FM 1093, Texas State Highway 60 and FM 1952 also run within the city limits, so a route may need a state highway crossing as well as a street crossing. Railroad Street is the longest named street at 1.47 miles, followed by Commerce Street at 1.29 miles and Guyler Street at 1.13 miles. Gresham Street adds another 0.66 miles. A bore plan needs the exact crossing point, not just the road name.

CrossingTypeMapped extentWho has a say
Texas State Highway 36State highway1.6 roadway miles insideState highway office
FM 1093State highway0.8 roadway miles insideState highway office
Texas State Highway 60State highway0.8 roadway miles insideState highway office
FM 1952State highway0.5 roadway miles insideState highway office
BNSF RailwayRailroad1.41 track miles insideThe railroad
Elm SloughStream0.62 channel miles insideChecked for Corps of Engineers jurisdiction
Allens CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.41 track miles inside Wallis, and public mapping shows five street and rail crossings in the city. Elm Slough runs 0.62 channel miles through the limits, with four mapped street crossings of named streams. Allens Creek is 0.7 miles outside the limits. Those mapped features can affect alignment, pits and access, so we check the route before setting the bore path.

Who approves a bore in Wallis and Austin County?

Wallis is incorporated, so city streets such as Railroad Street belong to the city. Work in the right of way of Texas State Highway 36, FM 1093, Texas State Highway 60 or FM 1952 needs a TxDOT utility permit reviewed by the Yoakum District. The line owner, not the driller, files through TxDOT’s RULIS system; we provide the bore plan and profile for that application. Highway cover depends on the line type, and the permit may set a different depth. A crossing of BNSF Railway needs an agreement with the railroad. For Elm Slough, we check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Wallis water system?

The City of Wallis public water system uses groundwater wells and reports 611 service connections serving 1,292 people. A new water line near Commerce Street may need to fit around that buried network. CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and San Bernard Electric Cooperative report service in Austin County. Before planning an electric conduit bore near Texas State Highway 36, we identify the line owner for the route.

Line ownerWhat it isSourceSize
City of WallisPublic water systemGroundwater wells611 connections, 1,292 people served
CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and San Bernard Electric CooperativeElectric utilities reporting service in Austin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Wallis’s median housing year at 1976; 36% of homes were built before 1960, and 26% in 2000 or later. That mix can mean replacement work near older streets as well as new services. Before drilling near a marked line on Gresham Street, we expose each marked utility with hydrovac potholing; paint shows location, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Do you cover Wallis and nearby Orchard?

Wallis is an incorporated city in Austin County, covers 1.5 square miles and sits at an elevation of 127 feet. Its ZIP code is 77485. Orchard is 6.0 miles east, Simonton is 6.2 miles northeast and East Bernard is 7.4 miles south. Sealy, the nearest larger city, is 10.9 miles northwest; Bellville, the county seat, is 24.7 miles northwest. From our Yukon, Oklahoma main office, Wallis is 457 road miles away and about 9.0 drive hours, which factors into planning a job near Elm Slough.

Places near Wallis

What would we bore near Railroad Street in Wallis?

  • Highway crossing: A bore beneath Texas State Highway 36 can carry a water or fiber line without cutting the roadway.
  • Rail crossing: A utility route beneath BNSF Railway needs an agreement with the railroad and a plan for its crossing requirements.
  • Creek crossing: A line under Elm Slough needs a planned path that accounts for the channel and possible federal jurisdiction.
  • Water service: A service near the City of Wallis system needs a route checked against existing groundwater well lines.
  • Street conduit: Electric conduit along Railroad Street calls for locating and exposing marked utilities before the drill approaches them.
  • Sewer line: A route along Commerce Street can use boring to avoid opening pavement where the path and access allow.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Elm Slough in Wallis?

A map pin matters near Elm Slough because the exact crossing point can change the route, access and pit locations. Send the Wallis address or pin, what goes in the ground, pipe or conduit size and footage. A sketch or plans help us see how the bore meets Railroad Street, a highway or an existing line.

A straight service run on Railroad Street with clear access is simpler to plan than a route under Texas State Highway 36 or BNSF Railway. Price depends on footage, pipe size, Verland and Lake Charles ground, and how many utilities must be exposed. Pavement, pits, excavator time, sand backfill and an Elm Slough crossing can add work. Wallis is 457 road miles from Yukon, so mobilization is part of the job scope.

Questions people ask about boring in Wallis

Does Trinity Boring Solutions take directional boring jobs in Wallis and Austin County?

Yes. We take directional boring work in Wallis and staff it with our own crews or partner contractor crews from satellite yards we have vetted. When discussing work in Wallis, we stay involved from the first call through the bore log, regardless of which crew is on site. We can plan routes near Railroad Street, Texas State Highway 36 and other local crossings.

Will a bore in Wallis hit rock and affect how we plan the crossing depth?

The USDA soil survey does not map bedrock in Wallis’s top five feet, but that does not rule out rock deeper down. The geologic map shows the Beaumont Formation, a Pleistocene unit described as predominantly clay. Near Elm Slough, we still plan from the site conditions and adjust if drilling shows a change below the mapped surface.

Who approves a bore under Texas State Highway 36 in Wallis?

TxDOT reviews utility permit applications for work in the right of way of Texas State Highway 36. The utility that owns the line files through TxDOT’s RULIS system, and the Yoakum District reviews the application. We prepare the bore plan and profile for the line owner, with cover and crossing details planned for the permit.

What does a bore under BNSF Railway in Wallis need?

A crossing under BNSF Railway needs an agreement with the railroad that owns the track. The agreement sets crossing details such as casing, depth and flagging. With 1.41 track miles mapped inside Wallis, we need the proposed crossing location to plan the bore and coordinate the required documents.

Can a line be bored under Elm Slough in Wallis?

A bore under Elm Slough can be planned, subject to the site and crossing review. The channel runs 0.62 miles inside Wallis, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. The route and pit locations need to account for the channel and nearby access.

Who runs Wallis’s public water system, and where does its water come from for our underground work planning?

The City of Wallis owns and runs the public water system, which draws water from groundwater wells. It reports 611 service connections serving 1,292 people. That existing network matters when planning a new water service or a separate bore near Commerce Street.

What bore sizes and lengths can you handle near Gresham Street in Wallis?

We handle lines from 3/4 inch service lines up to 48 inch casing, and bore lengths from 10 feet to 5,000 feet. A job near Gresham Street still depends on the route, soil and crossings. Send the proposed size and footage so we can review the scope.

How much Texas811 notice is needed for a bore on Railroad Street in Wallis?

For a Railroad Street bore, request locates at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as two working days. The request cannot be made earlier than 14 days before work. If the start slips more than 14 days after the notice, make a new request, and have worn or moved marks refreshed before work continues.

What affects the cost of directional boring near Texas State Highway 36 in Wallis?

The route, footage, pipe or conduit size and Verland clay all affect the job scope. A crossing of Texas State Highway 36, BNSF Railway or Elm Slough can add permitting, coordination or site work. We also account for exposed utilities, pavement, pits, equipment time and mobilization from Yukon, 457 road miles away.

Where the Wallis facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Wallis

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Wallis, Texas

Type the address of your job in Wallis. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Wallis

Same county: Bellville · San Felipe · Brazos Country · Industry · New Ulm. All counties: Texas county list.