trinityboringsolutions.com

New Ulm Texas Directional Boring: Catilla Soil, San Bernard River And Union Pacific

Quick Answer: New Ulm is an unincorporated community in Austin County, so its streets are under county or state authority; we do directional boring, also called horizontal directional drilling (HDD), for routes near San Bernard River. The Yukon, Oklahoma main office is 436 road miles away, which affects mobilization for work along FM 109. Catilla soil is mapped across 20 percent of the area, and its sand can cave behind the bit unless drilling fluid supports the hole. Track Road and Bernard Road are among the local routes where a bore can avoid cutting pavement.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

New Ulm bores at a glance

  • Unincorporated community in Austin County, Texas. Population 285 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 436 miles, about 8.8 hours of driving.
  • Ground: Catilla soil is mapped on 20 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 4 percent of the area.
  • Highways inside the boundary: FM 109 and FM 1094. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: Union Pacific, with 7 mapped street and rail crossings.
  • Named streams inside the boundary: San Bernard River, Redgate Creek, Sandy Creek and Post Oak Point Creek.
  • Public water: New Ulm Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near San Bernard River in New Ulm?

New Ulm is an unincorporated community in Austin County, with a 2020 Census count of 285 people. We install water and sewer lines, gas lines, electric conduit and fiber, including service routes along Bernard Road or connections that need to pass near San Bernard River. Directional boring can place those lines beneath a street or creek crossing without opening a trench across the surface.

Our main office is in Yukon, Oklahoma, and New Ulm work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. By comparison, a New Ulm job near San Bernard River may be a shorter utility crossing shaped by the local route and ground.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath New Ulm and Catilla soil?

The USDA soil survey maps Catilla loamy fine sand across 20 percent of New Ulm. Tremona, Straber and Tabor are also mapped soil series. At about 40 inches below the surface, clay is mapped across 54 percent of the area, while loamy fine sand accounts for 20 percent and sandy clay loam for 21 percent. Those are mapped patterns, not test borings. The mix matters along Bernard Road: sandy material can fall in behind a drill head, while clay can cling to the reamer and grip pipe.

USDA soil survey, inside the New Ulm mapped community boundaryWhat is mapped
Soil series mappedCatilla 20 percent, Tremona 19 percent, Straber 15 percent, Tabor 12 percent and Frelsburg 8 percent
Texture at the surfaceloamy fine sand 60 percent, fine sandy loam 28 percent and clay 10 percent
Texture about 40 inches downclay 54 percent, sandy clay loam 21 percent and loamy fine sand 20 percent
Engineering class about 40 inches downfat clay (CH) 47 percent, lean clay (CL) 25 percent and silty sand (SM) 20 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches4 percent of the area (0 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches19 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel51 percent of the area

Weathered bedrock is mapped within 60 inches in 4 percent of New Ulm, while hard bedrock is not mapped in that depth range. The USDA soil survey maps a seasonal water table within 60 inches in 19 percent of the area, so pits may need pumping. Flood prone soils are not mapped. High steel corrosion risk is mapped across 51 percent, a concern for steel casing or tracer wire that the line owner should address. The Pliocene Willis Formation includes clay, silt, sand and gravel, so the drill plan may change with material encountered.

How do we drill New Ulm ground with mapped clay?

New Ulm has both loamy fine sand and deeper clay in the USDA soil survey. We match fluid and reaming to the material, and use a walkover locator to track the drill near Bernard Road and other marked routes.

  1. Catilla loamy fine sand can fall in behind the bit, so we use drilling fluid to support the hole and ream in stages before pulling pipe.
  2. The USDA survey maps clay at about 40 inches across 54 percent of New Ulm, so we manage sticky cuttings and pull pipe after the hole is opened.
  3. With a seasonal water table mapped within 60 inches in 19 percent of the area, we keep pits small and pump water where needed.
  4. Before a bore near Bernard Road, we expose marked utilities with hydrovac and track depth and pitch from the surface as the drill advances.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where does a line have to go under Bernard Road in New Ulm?

FM 109 runs 1.9 roadway miles inside the mapped New Ulm community boundary, and FM 1094 adds 0.3 miles. Bernard Road is the longest named street at 2.47 miles, followed by Track Road at 1.83 miles and Buechmann Road at 1.67 miles. Work along these roads can include a bore beneath pavement or a driveway. For state highway pavement, the line is bored or tunneled beneath the existing highway, and a rural highway crossing extends beneath all travel lanes.

CrossingTypeMapped extentWho has a say
FM 109State highway1.9 roadway miles insideState highway office
FM 1094State highway0.3 roadway miles insideState highway office
Union PacificRailroad4.18 track miles insideThe railroad
San Bernard RiverStream2.69 channel miles insideChecked for Corps of Engineers jurisdiction
Redgate CreekStream0.6 channel miles insideChecked for Corps of Engineers jurisdiction
Sandy CreekStream0.57 channel miles insideChecked for Corps of Engineers jurisdiction
Post Oak Point CreekStream0.41 channel miles insideChecked for Corps of Engineers jurisdiction
Piper CreekStream0.05 channel miles insideChecked for Corps of Engineers jurisdiction
Little San Bernard RiverStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 4.18 track miles inside New Ulm, on its Smithville Subdivision, and public records map 7 street and rail crossings. A crossing needs an agreement with Union Pacific that sets casing, depth and flagging. San Bernard River runs 2.69 channel miles inside the community, and mapped street crossings of named streams total 4. Redgate Creek, Sandy Creek, Post Oak Point Creek and Piper Creek are also present. A river or creek route is checked for federal jurisdiction during planning.

Whose permission does a New Ulm bore need in Austin County?

New Ulm has no city government, so streets are under county or state authority rather than a city permit office. For work in the right of way of FM 109 or FM 1094, the line owner applies through TxDOT’s RULIS system, and the Yoakum District reviews it. We provide the bore plan and profile for the utility owner to submit. TxDOT cover rules depend on the line: electric and communication crossings need 60 inches, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. A permit may set another depth. A Union Pacific crossing needs the railroad’s agreement, and San Bernard River work is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve New Ulm, including New Ulm Water Supply Corporation?

New Ulm Water Supply Corporation is a local government public water system using groundwater wells. It serves 300 people through 183 service connections, so a water service bore may connect to an existing local line. County electric service is reported by CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and San Bernard Electric Cooperative. Those reports do not establish which provider owns a particular line. Before conduit is planned near FM 109, the line owner needs to be identified, and marked utilities should be exposed with hydrovac potholing before the drill approaches.

Line ownerWhat it isSourceSize
New Ulm Water Supply CorporationPublic water systemGroundwater wells183 connections, 300 people served
CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and San Bernard Electric CooperativeElectric utilities reporting service in Austin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put New Ulm’s median housing year at 1991. The estimates show 29 percent of homes built before 1960 and 26 percent built in 2000 or later. Those figures do not date buried utilities, but a replacement bore on Track Road may follow an older service route, while newer homes may need a new connection. We pothole marked lines along the route before drilling near them because locate marks show position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is New Ulm in relation to Fayetteville?

New Ulm is an unincorporated community in Austin County, Texas, at an elevation of 408 feet. Its mapped area is 5.36 square miles, and its ZIP code is 78950. Industry is 5.8 miles north, Fayetteville is 10.9 miles west, and Ellinger is 12.9 miles west. Bellville, the county seat, is 14.9 miles east; Brenham is the nearest larger city listed, 19.9 miles north. The Yukon yard is 436 road miles away, a drive of 8.8 hours, so distance can affect mobilization for a bore near FM 109.

Places near New Ulm

What boring work comes up along Buechmann Road in New Ulm?

  • Highway crossing: A bore beneath FM 109 can pass below pavement rather than trenching through the state highway.
  • Water service: A connection near New Ulm Water Supply Corporation may need a route to an existing groundwater well system line.
  • Fiber drop: A fiber conduit along Buechmann Road can pass below a driveway or roadway without opening a surface trench.
  • Creek crossing: A San Bernard River bore needs a planned profile that accounts for the channel and jurisdiction review.
  • Rail crossing: A line beneath Union Pacific track needs a crossing agreement that sets casing, depth and flagging.
  • Road replacement: A service route near Track Road can replace an existing line while avoiding cuts across pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for New Ulm work near Union Pacific?

For a bore near Union Pacific track or Bernard Road, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show the route, nearby crossings and access for the entry and exit pits. Those details let us scope the bore before pricing it.

Price starts with the ground: Catilla loamy fine sand can cave behind the bit, while deeper clay can load a reamer. We also account for footage, pipe size, utilities to expose, pavement, creek crossings, pits and excavator time. A route under FM 109 or Union Pacific track carries crossing requirements that affect the plan. At 436 road miles from Yukon, mobilization also matters. High profile or emergency work can change the scope.

Questions people ask about boring in New Ulm

Does Trinity take directional boring jobs in New Ulm, Austin County, and who staffs them?

Yes. We take directional boring work in New Ulm, and our crews or vetted drilling contractor partners staff the work. You deal with Trinity through the bore log, regardless of which crew is on site. For a route near Bernard Road, send the location and line details so we can understand the scope.

Can a line be bored under San Bernard River in New Ulm?

A bore under San Bernard River may be possible, depending on the route and ground conditions. The river runs 2.69 channel miles inside the mapped community boundary, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. A map pin and proposed line size help define the route.

Who runs the public water system in New Ulm, and where does its water come from?

New Ulm Water Supply Corporation runs the local public water system, and its source is groundwater wells. The system serves 300 people through 183 service connections. If a bore near FM 109 is for a water line, the connection point and the line owner help determine the route and scope.

Which electric provider owns a line in New Ulm, Austin County, before I plan conduit?

The specific line owner must be confirmed before planning a conduit bore. CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative and San Bernard Electric Cooperative report electric service in Austin County, but that does not identify the provider at every address. For work near FM 109, confirm ownership and expose marked lines before drilling.

Who controls streets in New Ulm, and can a bore avoid cutting Buechmann Road?

New Ulm has no city government, so its streets are under county or state authority. A bore can often pass beneath a roadway such as Buechmann Road without cutting the surface, subject to the route and applicable approvals. The street is 1.67 miles long inside the mapped community boundary.

How old are homes and buried lines near Track Road in New Ulm, and what does that mean for replacement bores?

The median housing year is 1991, according to American Community Survey 2019 to 2023 five year estimates, but that does not establish the age of buried lines. A replacement bore near Track Road may use an existing service route or need a new alignment. We expose marked utilities before drilling near them.

Does Trinity serve Industry and rural sites outside New Ulm?

Yes. We take work in New Ulm, nearby Industry and rural sites outside the mapped community boundary. Industry is 5.8 miles north of New Ulm. The route, line size, ground and access determine the scope, including whether a bore needs to cross a road or drainage feature.

How much notice does Texas811 need for a New Ulm bore near Bernard Road, and what if marks move?

Count back at least two working days from the planned start, excluding Saturdays, Sundays and legal holidays. A request cannot be made more than 14 days ahead. If work slips more than 14 days past the original notice, make a new request. For a bore near Bernard Road, worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring in New Ulm near FM 109?

The job scope sets the price, with ground and crossings among the main factors. Catilla soil may need staged reaming, while a route beneath FM 109 or Union Pacific track adds crossing considerations. Length, pipe size, marked utilities to expose, pavement, creek crossings, pits, excavator time and mobilization from Yukon also affect the work.

Where the New Ulm facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in New Ulm

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in New Ulm, Texas

Type the address of your job in New Ulm. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for New Ulm

Same county: Sealy · Bellville · Wallis · San Felipe · Brazos Country · South Frydek. All counties: Texas county list.