Castle Hills Texas Directional Boring: Eckrant Cobbly Clay, Austin Chalk, Olmos Creek
Quick Answer: From Yukon, our crews take directional boring, also called horizontal directional drilling (HDD), work in Castle Hills, where Interstate 410 is a major route to cross. The Yukon yard is 476 road miles away, and we staff Lockhill Selma Road projects with our crews or vetted partner contractor yards. Eckrant cobbly clay is common here and can cling to the reamer. Austin Chalk near the bore path calls for careful steering where soil meets rock.
Castle Hills bores at a glance
- Incorporated city in Bexar County, Texas. Population 3,931 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 476 miles, about 9.2 hours of driving.
- Ground: Eckrant soil is mapped on 41 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 79 percent of the area.
- Highways inside the boundary: Interstate 410, FM 1535 and FM 2696. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific.
- Named streams inside the boundary: Olmos Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Lockhill Selma Road in Castle Hills?
From the Yukon yard, Castle Hills is 476 road miles away, so we schedule our crews or a vetted partner contractor yard for work along Lockhill Selma Road. The Census Bureau Vintage 2024 estimate puts the city at 3,931 people. Along West Avenue or Jackson Keller Road, we can install water, sewer, gas, electric conduit or fiber by boring where the route and access fit.
Our main office is in Yukon, Oklahoma, and Castle Hills work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A small service line near Lockhill Selma Road sits at one end of our 3/4 inch to 48 inch casing range. Our family business began in 1965 and has drilled directionally since 1982, including bores from 10 feet to 5,000 feet.

What is Eckrant soil like to bore in Castle Hills?
The USDA soil survey maps Eckrant soil across 41% of Castle Hills, often as cobbly clay with 1 to 8 percent slopes. About 40 inches down, the survey maps bedrock across 79% of the area, clay across 10%, silty clay across 8% and very gravelly sand across 3%. The average clay content at that depth is 41%. These are mapped patterns, not test borings. Clay can stick to a reamer, while cobbles can push a drill head off line.
| USDA soil survey, inside the Castle Hills city limits | What is mapped |
|---|---|
| Soil series mapped | Eckrant 41 percent, Austin 15 percent, Eddy 8 percent, Whitewright 8 percent and Lewisville 8 percent |
| Texture at the surface | cobbly clay 41 percent, silty clay 23 percent and gravelly clay loam 17 percent |
| Texture about 40 inches down | bedrock 79 percent, clay 10 percent and silty clay 8 percent |
| Engineering class about 40 inches down | fat clay (CH) 17 percent and silty gravel (GM) 3 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 79 percent of the area (41 percent hard rock, 38 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 85 percent of the area |
The USDA soil survey puts typical bedrock depth at 15 inches, with hard bedrock mapped within 60 inches across 41% of Castle Hills and weathered bedrock across 38%. The mapped geologic unit is Austin Chalk, a Late Cretaceous lime mudstone and chalk. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 4%. High steel corrosion risk is mapped across 85%, so the line owner should choose coatings for steel casing or tracer wire; HDPE avoids that steel corrosion concern.
How do we drill Castle Hills bedrock?
Eckrant cobbly clay, shallow mapped bedrock and Austin Chalk call for a bore plan that follows the ground, not a one speed approach. We watch the drill head and adjust as soil gives way to rock.
- In Eckrant cobbly clay, we use controlled fluid and staged reaming so sticky cuttings do not build up on the reamer or grip the pipe.
- Where Austin Chalk or mapped bedrock is shallow, we slow the cut and check depth and pitch as cobbles or soil to rock contact can shift the head.
- Along pavement near Interstate 410, we manage fluid returns carefully so pressure does not lift the surface above the bore.
- At Olmos Creek, we plan the route below the channel where needed and check jurisdiction before settling the crossing approach.

What is in the way of a new line in Castle Hills near Union Pacific?
Interstate 410, FM 1535 and FM 2696 run within Castle Hills, with US 281, US 87 and Interstate 10 just outside the limits. Lockhill Selma Road, Jackson Keller Road and West Avenue are among the city’s longest named streets. Boring can carry a line beneath pavement and driveways without opening a trench across the surface. The route still needs to account for each marked utility and any highway right of way it enters.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 410 | Interstate | 2.7 roadway miles inside | State highway office |
| FM 1535 | State highway | 1.4 roadway miles inside | State highway office |
| FM 2696 | State highway | 0.2 roadway miles inside | State highway office |
| US 281 | Highway nearby | 1.2 miles outside | State highway office |
| US 87 | Highway nearby | 1.3 miles outside | State highway office |
| Interstate 10 | Highway nearby | 1.3 miles outside | State highway office |
| Union Pacific | Railroad | 0.07 track miles inside | The railroad |
| Olmos Creek | Stream | 0.55 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Martinez Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 0.07 track miles within Castle Hills, on the Union Pacific Kerrville Subdivision. No street and rail crossings are mapped inside the limits, but a proposed track crossing still needs coordination with the railroad. Olmos Creek has 0.55 channel miles here, and five street crossings of named streams are mapped. No lakes or ponds are mapped within one mile. Creek work needs a jurisdiction check during planning.
Who has to sign off on a Castle Hills bore in Bexar County?
Castle Hills is incorporated, so its city streets belong to the city itself. Work in Interstate 410, FM 1535 or FM 2696 right of way needs a TxDOT utility permit reviewed by the TxDOT San Antonio District. The utility owner, not our drilling crew, files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. A crossing of Union Pacific track needs an agreement from the railroad that sets the crossing conditions. Olmos Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Castle Hills in Bexar County?
The provider for a specific Castle Hills address must be confirmed with the city, county or local water district before a bore is planned; available drinking water records do not match a provider to the city. Electric utilities reporting service in Bexar County include City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for the address before a conduit bore is planned.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Bexar County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put the median Castle Hills housing year at 1965. The survey estimates 25% of homes were built before 1960, 67% from 1960 to 1999 and 8% in 2000 or later. A replacement bore along Jackson Keller Road may have older utilities close to newer service runs, so we pothole marked lines before drilling near them. Locate paint shows position, not depth.

How far is Castle Hills from Balcones Heights?
Castle Hills is in Bexar County at an elevation of 842 feet and covers 2.47 square miles. Its ZIP codes are 78213 and 78216. Balcones Heights is 3.0 miles southwest; Olmos Park is 4.0 miles southeast, and San Antonio is 4.3 miles south. San Antonio is both the nearest larger city and the county seat. From the Yukon, Oklahoma yard, Castle Hills is 476 road miles away and a 9.2 hour drive, which is part of planning crew mobilization.
Places near Castle Hills
- Directional boring in Balcones Heights: 3 miles southwest
- Olmos Park: 4 miles southeast
- Directional boring in Alamo Heights: 4.2 miles southeast
- San Antonio: 4.3 miles south
- Hill Country Village: 4.4 miles northeast
What kinds of bores come up near Olmos Creek in Castle Hills?
- Highway crossing: A route beneath Interstate 410 uses boring rather than cutting through existing highway pavement.
- Water service: A service route near West Avenue starts with confirming the water provider for that specific address.
- Fiber conduit: A run along Lockhill Selma Road can pass below driveways and pavement while marked utilities are exposed first.
- Creek crossing: A route under Olmos Creek needs planning for the channel and a jurisdiction check.
- Rail crossing: A proposed bore at Union Pacific track needs the railroad’s crossing agreement before the route is set.
- Replacement line: A bore near Jackson Keller Road can replace older service without opening a long trench through established streets.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Castle Hills quote near Interstate 410?
Send a map pin or street address first. The exact spot matters near Interstate 410, where the right of way may affect the route. Tell us what goes in the ground, the pipe or conduit size and the footage. A sketch or plans help us see access, nearby utilities and any creek or drainage crossing.
Price follows the work at the specific Castle Hills site. Eckrant cobbly clay and Austin Chalk affect drilling time; marked utilities, Union Pacific track or an Interstate 410 right of way add crossing and exposure work. Pavement, creek or drainage crossings, pits, excavator time and sand backfill also shape the scope. The distance from Yukon affects mobilization, and emergency or high profile work can add planning needs.
Questions people ask about boring in Castle Hills
Does Trinity Boring Solutions take directional boring jobs in Castle Hills and Bexar County?
Yes. We take directional boring work in Castle Hills, Bexar County, and keep one point of contact from the first call through the bore log. Our Yukon office dispatches our own crews or vetted partner contractor yards for a job near West Avenue, depending on the work and schedule.
Who owns electric lines in Castle Hills, Bexar County, and who confirms conduit specs?
The electric line owner depends on the address. Utilities reporting service in Bexar County include City of San Antonio and several electric cooperatives, so we identify the owner before planning a conduit bore near Interstate 410 or another route. The line owner confirms the conduit requirements for its system.
Does Castle Hills control West Avenue, and can a bore avoid cutting the street?
Castle Hills is incorporated, so city streets such as West Avenue belong to the city. Directional boring can place a line below the street without cutting its pavement, with pits set outside the crossing. The route still needs to account for marked utilities and any right of way involved.
What do Castle Hills homes near Jackson Keller Road mean for replacement bores?
The American Community Survey 2019 to 2023 estimates the median housing year in Castle Hills as 1965, with 25% built before 1960. A replacement bore near Jackson Keller Road may encounter existing utilities alongside later services. We expose marked lines with hydrovac before drilling close to them.
Does Eckrant soil in Castle Hills corrode steel, and what pipe is used?
The USDA soil survey maps high steel corrosion risk across 85% of Castle Hills. The line owner selects coatings for steel casing or tracer wire; HDPE does not have the same steel corrosion concern. Eckrant soil is mapped across 41% of the city, so material choices belong in the bore plan.
What ground does a Castle Hills bore pass through near Eckrant soil?
The USDA soil survey maps Eckrant cobbly clay across 41% of Castle Hills. At about 40 inches down, bedrock is mapped across 79% of the area, with clay across 10% and very gravelly sand across 3%. These are soil survey patterns, not a prediction for an exact bore path.
Does Trinity cover Castle Hills, Balcones Heights and rural sites outside town?
Yes. We take work in Castle Hills and nearby places such as Balcones Heights, 3.0 miles southwest, as well as sites outside city limits. A job beyond the city may change access and mobilization planning, so the address or map pin helps us understand where the bore needs to go.
How much 811 notice does a Castle Hills bore near Lockhill Selma Road need?
Texas811 needs a locate request at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before it. If work near Lockhill Selma Road starts more than 14 days after the original notice, submit a new request. Have worn or moved marks refreshed before work continues.
What affects the cost of a directional bore in Castle Hills near Interstate 410?
The scope sets the price. In Castle Hills, Eckrant clay and Austin Chalk affect drilling, while Interstate 410 or Union Pacific crossings can add planning and exposure work. Length, pipe size, pavement, creek crossings, pits, excavator time, backfill and mobilization from Yukon also matter. Send the location and plans so we can review the route.
Where the Castle Hills facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Castle Hills
- U.S. Census Bureau, TIGER/Line 2024: Castle Hills boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Castle Hills
- U.S. Census Bureau, American Community Survey 2019 to 2023: Castle Hills housing units and year built
- Macrostrat geologic map compilation: map units under Castle Hills
- U.S. Department of Transportation, North American Rail Network: track owners in Bexar County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bexar County
- U.S. Geological Survey, Elevation Point Query Service: Castle Hills elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Castle Hills
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Castle Hills
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Castle Hills, Texas
Type the address of your job in Castle Hills. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Castle Hills
Same county: San Antonio · Converse · Universal City · Live Oak · Timberwood Park · Leon Valley · Helotes · Lackland AFB · Kirby · Selma · Fair Oaks Ranch · Schertz. All counties: Texas county list.
