trinityboringsolutions.com

Selma Texas Directional Boring: Lewisville Silty Clay, Interstate 35 and Cibolo Creek

Quick Answer: Lewisville silty clay holds a bore open but can stick to the reamer, so Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for crossings such as Interstate 35 in Selma, Texas. Selma is 463 road miles from our Yukon, Oklahoma main office, with Union Pacific track also in the city. Lewisville soil is common here. We plan for sticky clay and check fluid returns near pavement.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Selma bores at a glance

  • Incorporated city in Bexar County, Guadalupe County and Comal County, Texas. Population 11,900 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 463 miles, about 8.9 hours of driving.
  • Ground: Lewisville soil is mapped on 35 percent of the area, with silty clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 11 percent of the area.
  • Highways inside the boundary: Interstate 35, US 81 and FM 1518. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Cibolo Creek.
  • Public water: City of Selma, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Selma and Bexar County?

Lewisville silty clay can cling to a reamer, so our bore plan accounts for the ground as well as the route. Selma spans Bexar County, Guadalupe County and Comal County. Selma’s Census Bureau Vintage 2024 population estimate of 11,900 informs how we plan underground work across the city. We install water, sewer, gas, electric conduit and fiber; a route beside Lookout Road could carry a service line or conduit without cutting the street.

Our main office is in Yukon, Oklahoma, and Selma work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, with directional boring work since 1982. With the City of Selma water system already serving the city, our record of no utility strike in over 25 years reflects the care we take around marked lines.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Selma soil like to bore in Lewisville soil?

The USDA soil survey maps Lewisville as Selma’s largest soil series, covering 35 percent of the city. Lewisville silty clay appears on 21 percent of the mapped area at 0 to 1 percent slopes and 13 percent at 1 to 3 percent slopes. At about 40 inches below the surface, silty clay covers 45 percent of the mapped area, while clay covers 19 percent. For Selma boring, mapped soil patterns guide our planning, but they are not test borings for setting a final bore path. Silty clay can hold the bore open, but sticky material can collect on the reamer and grip the pipe.

USDA soil survey, inside the Selma city limitsWhat is mapped
Soil series mappedLewisville 35 percent, Sunev 18 percent, Barbarosa 9 percent, Krum 7 percent and Eddy 5 percent
Texture at the surfacesilty clay 49 percent, loam 19 percent and clay 18 percent
Texture about 40 inches downsilty clay 45 percent, loam 19 percent and clay 19 percent
Engineering class about 40 inches downlean clay (CL) 43 percent, fat clay (CH) 41 percent and silty gravel (GM) 3 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches11 percent of the area (1 percent hard rock, 10 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel73 percent of the area

The USDA soil survey maps bedrock within 60 inches across 11 percent of Selma, with a typical mapped depth of 13 inches, so the route still needs field checks. Seasonal water tables within 40 inches are not mapped, while flood prone soils cover 7 percent. High steel corrosion risk is mapped across 73 percent, a concern to discuss for steel casing and tracer wire; the line owner selects any coating. The map includes Cenozoic alluvium and Late Cretaceous sedimentary material, so ground can vary near Cibolo Creek.

How do we bore Selma’s silty clay?

Lewisville silty clay is mapped across much of Selma. We adjust the drilling fluid and reaming sequence to limit sticky buildup, then prepare the pipe before opening the finished bore.

  1. Because Selma maps 45 percent silty clay at about 40 inches, we use thinner fluid with polymer and ream in stages to limit sticky buildup.
  2. Heavy clay covers 64 percent of the mapped area at about 40 inches, so we watch fluid returns near pavement to avoid lifting the surface.
  3. Before drilling near a marked line on Lookout Road, we expose it with hydrovac potholing; paint shows position, not depth.
  4. At Cibolo Creek, we plan the bore below the channel where needed, check jurisdiction during planning and track depth and pitch as drilling advances.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where might a Selma line pass under Interstate 35?

Interstate 35 runs through Selma, along with US 81 and FM 1518, so a route may need a highway crossing rather than an open cut. Loop 1604 is 0.3 miles from the city limits, and Texas State Highway 218 is 0.5 miles away. Lookout Road is the longest named street in the city at 2.89 miles; Evans Road runs 2.12 miles and Retama Parkway 1.28 miles. Those corridors give a project specific access and crossing points to check before choosing pits.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate5.7 roadway miles insideState highway office
US 81US highway1.8 roadway miles insideState highway office
FM 1518State highway1.3 roadway miles insideState highway office
Loop 1604Highway nearby0.3 miles outsideState highway office
Texas State Highway 218Highway nearby0.5 miles outsideState highway office
Union PacificRailroad1.8 track miles insideThe railroad
Cibolo CreekStream5.72 channel miles insideChecked for Corps of Engineers jurisdiction
Salitrillo CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.8 track miles in Selma, and public mapping shows one street and rail crossing in the city. A bore under the track needs an agreement with the railroad that sets casing, depth and flagging. Cibolo Creek runs 5.72 channel miles through Selma, where four mapped street crossings of named streams need attention in route planning. Creek work is checked for U.S. Army Corps of Engineers jurisdiction. Lakes and ponds are not mapped within one mile.

Who approves a Selma bore near Union Pacific and local roads?

Interstate 35, US 81 and FM 1518 are state routes, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT San Antonio District. The utility owner, not the drilling contractor, files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. Selma’s city streets belong to the city itself. A crossing of Union Pacific track also needs that railroad’s agreement, and Cibolo Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Selma near the City of Selma system?

At the City of Selma public water system, groundwater wells supply 11,418 people through 3,869 service connections, which we factor into utility coordination. That existing network matters when routing a new service near Lookout Road. No city owned electric system is identified in the records. In Bexar County, we confirm the utility because reported electric service includes City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. Before we plan an electric conduit bore beneath Union Pacific track in Selma, we confirm the line owner.

Line ownerWhat it isSourceSize
City of SelmaPublic water systemGroundwater wells3,869 connections, 11,418 people served
City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bexar County, Guadalupe County and Comal CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Selma’s median housing year at 2010; 89 percent of homes were built in 2000 or later, and 11 percent from 1960 to 1999. For Selma’s public water system, our planning recognizes both new service work and replacement needs without predicting conditions at any address. We pothole every marked utility before drilling near it. For a proposed bore under Lookout Road, hydrovac potholing can expose marked lines and establish their depth before the drill approaches.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

What is near Selma, including Schertz?

Selma covers 5.01 square miles across Bexar, Guadalupe and Comal counties, at an elevation of 750 feet, and its ZIP code is 78154. Universal City is 2.4 miles south and Live Oak is 2.6 miles southwest; Garden Ridge is 3.7 miles north. Schertz, the nearest larger city, is 4.2 miles east. San Antonio, the Bexar County seat, is 15.2 miles southwest. From our Yukon yard, the road trip to Selma is 463 miles and 8.9 hours, which affects mobilization for a project.

Places near Selma

What boring work comes up along Selma’s Lookout Road?

  • Highway crossing: An Interstate 35 bore keeps the route beneath the highway rather than cutting its pavement, with the utility owner handling the permit.
  • Water service: A connection near the City of Selma system needs a route checked against existing groundwater well service lines.
  • Fiber conduit: A run beside Lookout Road can avoid opening the street, with marked utilities exposed before the drill approaches.
  • Creek crossing: A Cibolo Creek route needs a planned depth beneath the channel and a jurisdiction check during planning.
  • Rail crossing: A bore under Union Pacific track needs the railroad’s crossing agreement and its terms for casing, depth and flagging.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Selma near Ventura Boulevard?

For a route near Ventura Boulevard, send the street address or map pin first. Tell us what will go underground, such as a water line near the City of Selma system or fiber conduit by a road. Give the pipe or conduit size and the footage. A sketch or plans help us see how the route meets streets, property and access points.

The job scope sets the price, and the 463 road miles from Yukon affect mobilization. Lewisville silty clay can change reaming and fluid needs; Interstate 35, Union Pacific track or a Cibolo Creek crossing can add coordination and exposure work. Pipe size and length matter too, as do pavement, pits, excavator time and sand backfill. On a Selma crossing beneath Union Pacific track, high profile or emergency work can change the scope we plan.

Questions people ask about boring in Selma

Does Trinity Boring Solutions take directional boring jobs in Selma and Bexar County?

Yes. We take directional boring work in Selma, including routes near Lookout Road and the City of Selma water system. Our own crews and vetted partner drilling contractors support the work from outside the city, while Trinity remains the customer’s contact through the bore log.

Who approves a bore under Interstate 35 in Selma?

TxDOT reviews utility work in the Interstate 35 right of way through its San Antonio District. The utility owner submits the application in TxDOT’s RULIS system, not the drilling contractor. We prepare the bore plan and profile for the Selma crossing and work under the permit issued to the utility owner.

What does a Selma bore beneath Union Pacific track require, and how do we plan clearance and coordination?

A crossing of Union Pacific track requires an agreement with the railroad that owns the track. That agreement sets the casing, depth and flagging conditions for the Selma bore. The railroad has 1.8 track miles within the city, so a route near the mapped street and rail crossing needs early coordination.

Can a line be bored beneath Cibolo Creek in Selma?

A bore beneath Cibolo Creek can be planned, with depth set to pass below the channel where required. The creek runs 5.72 channel miles through Selma, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Route and ground conditions determine the drilling approach.

Who runs Selma’s public water system, and do groundwater wells supply the water we plan around?

The City of Selma owns the public water system, which draws from groundwater wells. Selma’s public water system serves 11,418 people through 3,869 service connections, which we account for when coordinating underground routes. A proposed bore near Lookout Road should account for existing water lines and expose marked utilities before drilling close to them.

Which electric line owner should I check for a Selma project in Bexar County?

Confirm the electric line owner for the specific Selma address before planning a conduit bore. Utilities reporting service in Bexar County include City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. Those records do not identify one provider for every address.

How far is Selma from Yukon, and does Schertz make a difference to the job?

Selma is 463 road miles and 8.9 drive hours from our Yukon, Oklahoma main office. Schertz is 4.2 miles east of Selma, but the Yukon distance affects crew mobilization and job planning. The route, pipe size, ground and crossings still determine the work required at the Selma site.

How much Texas811 notice does a Selma bore near Lookout Road need?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Lookout Road start slips more than 14 days past the original notice, submit a new request. On Selma work, we refresh worn or moved marks through Texas811 before resuming a bore, keeping the marked route current.

What affects the cost of directional boring in Selma near Interstate 35?

The job scope drives the price: footage, pipe or conduit size, Lewisville silty clay, pavement, and the number of utilities to expose all matter. A crossing at Interstate 35, Union Pacific track or Cibolo Creek adds site specific planning. At 463 road miles from Yukon, we account for the distance when scheduling Selma boring mobilization.

Where the Selma facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Selma

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Selma, Texas

Type the address of your job in Selma. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page