Helotes Texas Directional Boring: Eckrant Soil, Highway 16 and Helotes Creek
Quick Answer: Helotes is an incorporated city in Bexar County, so its city streets, including Bandera Road, belong to the city. We do directional boring, also called horizontal directional drilling (HDD), for lines crossing Bandera Road and other Helotes routes. The Yukon, Oklahoma main office is 488 road miles away, a factor for work near Helotes Creek. Eckrant soil is common here, and shallow bedrock can slow a bore or call for rock tooling.
Helotes bores at a glance
- Incorporated city in Bexar County, Texas. Population 10,223 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 488 miles, about 9.5 hours of driving.
- Ground: Eckrant soil is mapped on 64 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 81 percent of the area.
- Highways inside the boundary: Texas State Highway 16 and FM 1560. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Helotes Creek, French Creek, Reyes Creek and Ranch Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring along Bandera Road in Helotes?
Helotes is an incorporated city in Bexar County, so the city owns its streets, including Bandera Road. The Census Bureau Vintage 2024 estimate puts the population at 10,223. We install water, sewer, gas, electric conduit and fiber lines along Helotes streets or across routes such as Texas State Highway 16, with the bore path set to avoid open cuts.
Our main office is in Yukon, Oklahoma, and Helotes work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have drilled directionally since 1982, which matters where Helotes soil can turn to shallow limestone. The work runs from the first call through the bore log, whichever crew is on site.

What ground should a bore plan for in Helotes and Eckrant soil?
The USDA soil survey maps Eckrant soil across 64 percent of Helotes. Surface textures include very cobbly clay over 33 percent and cobbly clay over 31 percent of the mapped area. At about 40 inches below the surface, the survey maps bedrock across 81 percent of the area and reports an average clay content of 35 percent. These are mapped soil patterns, not test borings. For a bore near Galm Road, cobbles and sticky clay can affect steering and make the reamer work harder.
| USDA soil survey, inside the Helotes city limits | What is mapped |
|---|---|
| Soil series mapped | Eckrant 64 percent, Crawford 11 percent, Lewisville 10 percent, Anhalt 5 percent and Patrick 5 percent |
| Texture at the surface | very cobbly clay 33 percent, cobbly clay 31 percent and stony clay 11 percent |
| Texture about 40 inches down | bedrock 81 percent, silty clay 10 percent and very gravelly sand 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 14 percent and silty gravel (GM) 5 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | 81 percent of the area (76 percent hard rock, 5 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps hard bedrock within 60 inches across 76 percent of Helotes, with typical bedrock depth at 16 inches. That can mean slower drilling and a need for rock tooling; the Kainer Fm basal nodular member is mapped as Albian limestone. Seasonal water tables and flood prone soils are not mapped in the top 60 inches, but Helotes Creek still needs site specific planning. High steel corrosion risk is mapped throughout the city, so the line owner should select any casing or tracer wire protection.
How do we drill through Helotes soil and bedrock?
Helotes has cobbly Eckrant clay and shallow mapped bedrock, so we choose tooling and fluid for the route rather than assume one ground type. Bandera Road and Helotes Creek crossings also shape the bore path.
- Eckrant soil includes cobbly clay, which can cling to the reamer; we use staged reaming and keep the pullback ready so the open hole is not left waiting.
- With bedrock mapped shallow across Helotes, the route may need a rock bit or mud motor, and we check steering carefully where soil meets limestone.
- Before drilling near a marked line on Bandera Road, we pothole it with hydrovac to confirm depth, then track the drill head from the surface.
- For a planned bore along Galm Road, we request Texas811 marks at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead.

Which roads and creeks could a bore cross in Helotes near Bandera Road?
Texas State Highway 16 and FM 1560 run inside Helotes, while Loop 1604 is 0.3 miles beyond the city limits. A crossing under Texas State Highway 16 needs to be planned as state right of way work. Bandera Road is the longest named street in the city at 6.96 miles. Iron Horse Way runs 2.77 miles, Galm Road 1.9 miles and Antonio Drive 1.85 miles. These routes give a project a clear local reference for locating the bore and its pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 16 | State highway | 7 roadway miles inside | State highway office |
| FM 1560 | State highway | 3.6 roadway miles inside | State highway office |
| Loop 1604 | Highway nearby | 0.3 miles outside | State highway office |
| Helotes Creek | Stream | 3.82 channel miles inside | Checked for Corps of Engineers jurisdiction |
| French Creek | Stream | 2.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Reyes Creek | Stream | 1.08 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Ranch Creek | Stream | 0.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Los Reyes Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Culebra Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Government Canyon Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Huesta Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Helotes or within one mile, and public mapping shows no street and rail crossings in the city. Helotes Creek runs 3.82 channel miles inside the limits; French Creek runs 2.31 and Reyes Creek 1.08. Public mapping identifies 16 street crossings of named streams. No lakes or ponds are mapped within one mile. A Helotes Creek crossing needs a route and depth plan that accounts for the channel and the review of possible federal jurisdiction.
Do I need a permit for a Helotes bore under Texas State Highway 16?
Texas State Highway 16 is a state route, so its right of way is handled by TxDOT in the San Antonio District. The utility that owns the line submits the utility permit application through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. For an existing highway crossing, TxDOT rules call for boring or tunneling rather than open trenching, with casing and required cover based on the line type. The permit can set a different depth. Helotes Creek crossings are checked during planning for possible U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose buried lines should we check in Helotes and Bexar County?
The water provider for a specific Helotes address has to be confirmed with the city, Bexar County or the local water district before a bore is planned. The available records do not identify a provider matched to the city. Utilities reporting electric service in Bexar County include the City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. Those county reports do not establish which company owns a line at an Antonio Drive address, so the line owner must be confirmed before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Bexar County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates give Helotes a median housing year of 2005; 65 percent of units were built in 2000 or later and 35 percent from 1960 to 1999. That mix can mean both new service runs and replacement lines near Iron Horse Way. Before the drill approaches any marked utility, we expose it with hydrovac potholing because locate paint shows position, not depth. For a bore along Bandera Road, that means exposing each marked line on the path first.

What is near Helotes and San Antonio for a drilling project?
Helotes is in Bexar County, on the northwestern side of San Antonio, at an elevation of 1,115 feet. The incorporated city covers 6.93 square miles and uses ZIP codes 78023 and 78254. Grey Forest is 2.6 miles north; Cross Mountain is 5.0 miles north; Leon Valley is 7.0 miles southeast. San Antonio, the nearest larger city and county seat, is 12.3 miles southeast. The Yukon, Oklahoma yard is 488 road miles away, about a 9.5 hour drive, which factors into mobilization for work near Texas State Highway 16.
Places near Helotes
- Grey Forest: 2.6 miles north
- Directional boring in Cross Mountain: 5 miles north
- Directional boring in Leon Valley: 7 miles southeast
- Directional boring in Shavano Park: 7.5 miles east
- Directional boring in Scenic Oaks: 8.7 miles north
- Directional boring in San Antonio: 12.3 miles southeast
What would we bore near Helotes Creek in Helotes?
- Highway crossing: A line beneath Texas State Highway 16 needs a bore planned for state right of way, with the utility owner handling the permit application.
- Water service: A service run near Galm Road needs the address specific water provider confirmed before we choose the connection route.
- Fiber conduit: A route along Iron Horse Way can be bored between dirt pits to avoid cutting the pavement and driveway access.
- Creek crossing: A Helotes Creek bore needs channel depth planning and a check for possible U.S. Army Corps of Engineers jurisdiction.
- Utility exposure: Before a bore near Bandera Road, we hydrovac pothole marked lines on the path because surface marks do not show depth.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Helotes bore near Antonio Drive?
For a quote near Antonio Drive, send the address or map pin first, then say what will go in the ground, such as a water line or fiber conduit. Include the pipe or conduit size and the footage, for example a service run toward Galm Road. A sketch or plans help show pits, access and crossings before we set the scope.
The Yukon yard is 488 road miles from Helotes, so mobilization is part of planning a Bandera Road job. Length, pipe size and the Eckrant clay or shallow Kainer limestone affect the work. Crossings and exposed utilities matter near Texas State Highway 16 or Helotes Creek. Pavement, pit size, excavator time, sand backfill and emergency timing can also change the scope. We review those details together rather than price by footage alone.
Questions people ask about boring in Helotes
Does Trinity Boring Solutions take jobs in Bexar County near Helotes?
Yes. We take directional boring work in Helotes, and staffing can include our own crews or satellite yards run by drilling partners we have vetted. You work with Trinity from the first call through the bore log. For a route along Bandera Road, send the location and line details so we can assess the scope.
Who approves a Helotes bore under Texas State Highway 16?
TxDOT reviews the utility permit for Texas State Highway 16 through its San Antonio District. The utility that owns the line files in the RULIS system, and we prepare the bore plan and profile for its application. The crossing depth and installation conditions are set through the permit for that highway route.
Can a line be bored under Helotes Creek in Helotes?
A bore under Helotes Creek can be considered after the route, channel and ground are reviewed. Helotes Creek runs 3.82 channel miles within the city, and creek crossings are checked during planning for possible U.S. Army Corps of Engineers jurisdiction. The site determines the bore alignment and depth.
Who owns electric lines in Helotes and Bexar County, and who confirms conduit specs?
Several utilities report electric service in Bexar County, including Bandera Electric Cooperative and the City of San Antonio. That does not identify the owner of a particular line near Antonio Drive. Confirm the line owner and its conduit specifications before planning the bore, so the installation is based on the actual line requirements.
Does the city or county control Galm Road in Helotes, and must it be cut?
Helotes is incorporated, so Galm Road is a city street. A directional bore can pass beneath the street with pits on each side, leaving the pavement uncut. The route still needs to account for marked utilities and access at the proposed pit locations.
What do Helotes housing ages near Iron Horse Way mean for replacement bores?
The American Community Survey 2019 to 2023 estimates place the median housing year at 2005, with 65 percent of units built in 2000 or later and 35 percent from 1960 to 1999. A project near Iron Horse Way could involve a new service or an older line replacement. We expose marked utilities before drilling close to them.
Does Trinity cover Grey Forest and rural sites outside Helotes?
We take work across Texas, including projects near Grey Forest and sites outside Helotes city limits. Grey Forest is 2.6 miles north of Helotes, but each route has its own access, ground and crossing conditions. Send a location near Texas State Highway 16 or the surrounding area for a scope review.
How early should I call Texas811 for a Helotes bore along Bandera Road?
Request Texas811 marks at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Bandera Road start moves more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed before work continues.
What affects the cost of a Helotes bore near Texas State Highway 16?
The job length and line size matter, along with Eckrant clay, shallow bedrock, pavement, utility crossings and pit work. A Texas State Highway 16 crossing adds state permit planning, while a Helotes Creek route calls for creek specific review. Mobilization also reflects the 488 road miles from the Yukon yard.
Where the Helotes facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Helotes
- U.S. Census Bureau, TIGER/Line 2024: Helotes boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Helotes
- U.S. Census Bureau, American Community Survey 2019 to 2023: Helotes housing units and year built
- Macrostrat geologic map compilation: map units under Helotes
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bexar County
- U.S. Geological Survey, Elevation Point Query Service: Helotes elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Helotes
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Helotes
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Helotes, Texas
Type the address of your job in Helotes. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Helotes
Same county: Converse · Universal City · Live Oak · Timberwood Park · Lackland AFB · Kirby · Selma · Alamo Heights · Fair Oaks Ranch · Schertz · Windcrest · Sandy Oaks. All counties: Texas county list.
