Skellytown Texas Directional Boring: Manson Loam, FM 294 and Ogallala Formation
Quick Answer: Skellytown is an incorporated town, so Main Street and its other public streets belong to the town; we take directional boring, also called horizontal directional drilling (HDD), work for utility routes there. FM 294 has 0.6 mapped roadway miles inside town limits, where a bore can avoid cutting pavement. The Yukon main office is 217 road miles away, and Pampa is 11.8 miles east. Manson soil is heavy clay loam below about 40 inches, so sticky cuttings can load the reamer and grip pipe.
Skellytown bores at a glance
- Incorporated city in Carson County, Texas. Population 389 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 217 miles, about 4.4 hours of driving.
- Ground: Manson soil is mapped on 96 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 294. State permit office: TxDOT Amarillo District.
- Railroad track inside the boundary: none mapped.
- Public water: Skellytown Municipal Water System, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near FM 294 in Skellytown?
Skellytown is an incorporated town in Carson County, with 389 residents in the Census Bureau Vintage 2024 estimate. Its 10.39 public road miles include Main Street and Roosevelt Street, where water, sewer, gas, electric conduit or fiber routes may need a bore. We install those lines beneath streets or other work areas without opening the full route.
Our main office is in Yukon, Oklahoma, and Skellytown work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Beside FM 294, a typical Skellytown job is more likely a shorter service or conduit route through Manson loam. For planning a Skellytown crossing in Carson County, our family business began in 1965 and has done directional boring since 1982.

What is Manson soil like to bore in Skellytown?
The USDA soil survey maps Manson soil across 96 percent of Skellytown, mostly as Manson loam and Manson Paloduro association. At the surface, mapped texture is loam; at about 40 inches, the mapped texture is clay loam across the area, with an average clay content of 37 percent. Heavy clay is mapped across 96 percent of the area at that depth, while sandy ground is not mapped there. We treat Manson and Plemons as mapped soil patterns, not site specific test borings for Skellytown work. The sticky clay can ball on a reamer and grip pipe, so fluid and reaming need control.
| USDA soil survey, inside the Skellytown city limits | What is mapped |
|---|---|
| Soil series mapped | Manson 96 percent and Plemons 4 percent |
| Texture at the surface | loam 100 percent |
| Texture about 40 inches down | clay loam 100 percent |
| Engineering class about 40 inches down | lean clay (CL) 100 percent |
| Average clay content about 40 inches down | 37 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 96 percent of the area |
Bedrock is not mapped within the top five feet around Skellytown Airport, though the geologic map shows the Ogallala Formation, a Pliocene deposit of sand, silt, clay, gravel and caliche. Seasonal water table and flood prone soils are not mapped in town, so the soil survey does not point to a shallow water or mapped creek flooding issue. High steel corrosion risk is mapped across 96 percent of the area. The line owner can weigh coatings for steel casing or tracer wire; HDPE is not affected by that soil corrosion concern.
What does it take to bore Skellytown clay loam?
Manson clay loam at about 40 inches can hold a hole but stick to the tooling. Around Main Street and FM 294, we plan the fluid, reaming and pullback to suit the ground and protect the surface.
- Manson clay loam can stick to the reamer, so we use a suitable fluid mix and staged reaming before pulling pipe along a Roosevelt Street route.
- Heavy clay is mapped near Lindberg Street; we watch fluid returns and keep pressure controlled to reduce the chance of lifting pavement.
- Before drilling near a marked line on Main Street, we use hydrovac potholing to expose it because locate paint does not show its depth.
- At FM 294, we track the drill head from the surface and log depth and pitch as the bore advances beneath the road.

What does a bore have to cross on Main Street in Skellytown?
FM 294 is the state highway mapped for 0.6 roadway miles inside Skellytown, and Texas State Highway 152 runs along or touches the town limits. Main Street is the longest named street at 0.64 miles, followed by Roosevelt Street at 0.63 miles and 4th Street at 0.56 miles. Lindberg Street adds another named route through town. For a crossing beneath pavement, boring keeps the street surface intact; the entry and exit pits still need suitable space off the traveled way.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 294 | State highway | 0.6 roadway miles inside | State highway office |
| Texas State Highway 152 | Highway nearby | Runs along or touches the city limits | State highway office |
Public records map no railroad inside Skellytown or within one mile, so there is no mapped local track crossing to plan around. No named streams or street crossings of named streams are mapped in town or within one mile, and no lakes or ponds are mapped within one mile. That leaves no mapped creek crossing near Main Street to affect a bore plan, though the actual route and surface conditions still need review.
Who has to sign off on FM 294 work in Skellytown?
Main Street and the other local streets are town streets; FM 294 and Texas State Highway 152 fall under state highway rules where work uses highway right of way. A utility line under FM 294 needs a TxDOT utility permit, reviewed by the TxDOT Amarillo District. The line owner files the application in TxDOT’s online RULIS system, while we prepare the bore plan and profile and work under the permit issued to that owner. At highway crossings, the required cover depends on the line: electric and communication lines, water lines and pressurized sewer lines need 60 inches below the lowest crossed grade. Along right of way, electric and communication lines need 48 inches of cover and water lines need 36 inches. TxDOT can set a different depth. Its rules require boring or tunneling beneath existing highway pavement; no railroad or named stream crossing is mapped near Skellytown.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Carson County near Skellytown?
The Skellytown Municipal Water System is owned by local government and draws from groundwater wells. It serves 394 people through 230 service connections, so a water service bore may connect to an established local system. Southwestern Public Service reports electric service in Carson County. Before planning an electric conduit bore along Lindberg Street or another Skellytown route, we confirm which utility owns the line; the county report does not identify the provider at every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Skellytown Municipal Water System | Public water system | Groundwater wells | 230 connections, 394 people served |
| Southwestern Public Service | Electric utilities reporting service in Carson County | EIA Form 861 | Confirm the line owner by address |
We read the American Community Survey 2019 to 2023 five year estimates as placing Skellytown’s median housing year at 1956, not as a measure of underground conditions. The survey estimates 61 percent of homes were built before 1960, 38 percent from 1960 to 1999, and 1 percent in 2000 or later. A job along Roosevelt Street could involve replacing an older service or adding a new one; the age data does not show the condition of any specific line. We hydrovac pothole marked utilities on the route before drilling near them, since locate marks show position rather than depth.

What is near Skellytown and Pampa?
Skellytown is in Carson County, 3,280 feet above sea level, and covers 0.53 square miles. Its ZIP code is 79080. White Deer is 9.5 miles south, Pampa is 11.8 miles east, and Borger is 14.3 miles northwest. Panhandle, the county seat, is 19.4 miles southwest; Pampa is the nearest larger city. From our Yukon, Oklahoma yard, Skellytown is 217 road miles away and about 4.4 hours by car. That distance is part of planning a crew mobilization for a route near FM 294.
Places near Skellytown
- Directional boring in White Deer: 9.5 miles south
- Directional boring in Pampa: 11.8 miles east
- Directional boring in Borger: 14.3 miles northwest
- Directional boring in Panhandle: 19.4 miles southwest
- Directional boring in Sanford: 22.1 miles northwest
What boring work comes up near Roosevelt Street in Skellytown?
- Highway crossing: A bore beneath FM 294 needs a route and depth planned around the line type and TxDOT permit.
- Water service: A connection near Roosevelt Street may tie into the Skellytown Municipal Water System, which draws from groundwater wells.
- Fiber conduit: A route along Main Street can pass beneath pavement without cutting the street surface, with pits placed beside the bore.
- Electric conduit: Near Lindberg Street, we confirm the line owner and expose marked utilities before drilling close to them.
- Street replacement: A water or sewer route near 4th Street can use a bore to avoid opening the full street length.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Lindberg Street work in Skellytown?
For a Lindberg Street quote, send the address or map pin, what will go underground, the pipe or conduit size, the footage, and any sketch or plans, so we can compare the proposed route with pavement, access and utility context around Main Street and FM 294. A route that crosses FM 294 differs from one staying on Lindberg Street.
Skellytown is 217 road miles from our Yukon yard, so mobilization is part of the scope. Manson clay loam can affect drilling time and reaming, while a route under FM 294 brings highway cover and pavement requirements into the plan. Length, pipe or conduit size, marked utilities to expose, pavement, pit space, excavator time and sand backfill also affect the work. Creek or drainage crossings and emergency or high profile work can change the required equipment and planning.
Questions people ask about boring in Skellytown
Does Trinity take directional boring work in Skellytown and Carson County?
Yes. We take directional boring work in Skellytown, with crews from Trinity or from drilling partners we have vetted. Our Yukon office coordinates the job and remains the contact for the work record if a partner crew is on a Carson County route.
Does Manson soil in Skellytown corrode steel, and what pipe can I use?
The USDA soil survey maps high steel corrosion risk across 96 percent of Skellytown, including its Manson soils. For a Skellytown route on Main Street, the line owner chooses any coating for steel casing or tracer wire, and we coordinate with that choice. HDPE is not affected by that soil corrosion concern, so the material choice can be considered with the line owner’s design.
What ground does a bore go through in Skellytown Manson soil?
The USDA soil survey maps loam at the surface and clay loam at about 40 inches across Skellytown. Manson covers 96 percent of the town, and heavy clay is mapped across 96 percent at that depth. A bore near Main Street should account for sticky cuttings that can build on the reamer.
Will our bore in Skellytown hit rock along FM 294, or must we assess conditions for each crossing?
Bedrock is not mapped within the top five feet around Skellytown Airport, but that does not rule out deeper rock. The geologic map shows the Pliocene Ogallala Formation, which includes sand, silt, clay, gravel and caliche. A route still needs to be planned for the conditions found along its path.
Who approves a bore under FM 294 in Skellytown?
For work in FM 294 right of way, the utility owner applies for a TxDOT utility permit through RULIS. The TxDOT Amarillo District reviews it. We prepare the bore plan and profile and work under the permit issued to the line owner; required cover depends on the type of line.
Who runs the water system in Skellytown, and where does its water come from?
The local government owns the Skellytown Municipal Water System, which gets water from groundwater wells. Public records list 230 service connections and 394 people served. A proposed water service bore needs to be planned around the existing system and marked lines along its Skellytown route.
How much 811 notice does a Skellytown bore near Main Street need?
For a Main Street bore, request a Texas811 locate at least two working days before the planned start, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days, make a new request. Refresh worn or moved marks through Texas811 before work continues.
How far is Skellytown from the Yukon office, and does Pampa help with mobilization?
Skellytown is 217 road miles and about 4.4 hours from our Yukon, Oklahoma yard. Pampa is 11.8 miles east of town, but the mobilization is planned from Yukon. The distance can affect the job scope for a bore near FM 294 or another Skellytown street.
What affects the cost of directional boring under FM 294 in Skellytown?
The job scope sets the price, not one feature alone. For FM 294, the utility permit, line type, required cover and pavement affect planning. Manson clay loam, bore length, pipe or conduit size, utilities to expose, pit work, backfill and mobilization from Yukon also matter. A route with emergency needs can require a different scope.
Where the Skellytown facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Skellytown
- U.S. Census Bureau, TIGER/Line 2024: Skellytown boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Skellytown
- U.S. Census Bureau, American Community Survey 2019 to 2023: Skellytown housing units and year built
- Macrostrat geologic map compilation: map units under Skellytown
- U.S. EPA Safe Drinking Water Information System: public water systems serving Skellytown
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Carson County
- U.S. Geological Survey, Elevation Point Query Service: Skellytown elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Skellytown
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Skellytown
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Skellytown, Texas
Type the address of your job in Skellytown. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Skellytown
Same county: Groom. All counties: Texas county list.
