trinityboringsolutions.com

Farmersville Texas Directional Boring: Houston Black Clay, US 380 and Elm Creek

Quick Answer: From our Yukon, Oklahoma main office, Farmersville is 224 road miles away; our own crews and vetted partner crews can take directional boring, also called horizontal directional drilling (HDD), beneath US 380. US 380 gives a bore route a highway crossing to plan around. Houston Black clay dominates the mapped ground, so sticky cuttings and swelling can affect reaming and pullback timing. At CPKC (Kansas City Southern) track, we plan for railroad coordination before the crossing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Farmersville bores at a glance

  • Incorporated city in Collin County, Texas. Population 4,352 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 224 miles, about 4.6 hours of driving.
  • Ground: Houston Black soil is mapped on 51 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 15 percent of the area.
  • Highways inside the boundary: US 380, Texas State Highway 78, Texas State Highway 78 Business and FM 2194. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: CPKC (Kansas City Southern), with 7 mapped street and rail crossings.
  • Named streams inside the boundary: Elm Creek, Groves Creek, Lee Creek and Brushy Creek.
  • Public water: City of Farmersville, surface water bought from another system.
  • Electric: City of Farmersville municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for Farmersville boring near CPKC (Kansas City Southern)?

From our Yukon office, Farmersville is 224 road miles away, and we schedule our own crews or vetted partner crews for work in Collin County. The Census Bureau Vintage 2024 estimate puts Farmersville at 4,352 people. We can bore water, sewer, gas, electric conduit and fiber routes beneath streets such as Main Street, where a trench would interrupt the roadway.

Our main office is in Yukon, Oklahoma, and Farmersville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Against that reach, a typical Farmersville job is a shorter service or utility crossing through Houston Black clay or beneath US 380. Trinity is a family business started in 1965, with directional boring since 1982.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Houston Black soil like to bore in Farmersville?

The USDA soil survey maps Houston Black across 51 percent of Farmersville, with Houston Black clay map units covering 49 percent. At about 40 inches below the surface, clay accounts for 80 percent of mapped texture and clay loam another 10 percent. The survey reports an average clay content of 50 percent at that depth. These are mapped soil patterns, not a description of every bore location. In this heavy clay, the cuttings can stick to the reamer, and wet ground can swell around the pipe.

USDA soil survey, inside the Farmersville city limitsWhat is mapped
Soil series mappedHouston Black 51 percent, Heiden 20 percent, Engle 12 percent, Lamar 5 percent and Ferris 4 percent
Texture at the surfaceclay 79 percent and clay loam 17 percent
Texture about 40 inches downclay 80 percent, clay loam 10 percent and bedrock 6 percent
Engineering class about 40 inches downfat clay (CH) 80 percent and lean clay (CL) 10 percent
Average clay content about 40 inches down50 percent
Bedrock mapped within 60 inches15 percent of the area (0 percent hard rock, 15 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel80 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches in 15 percent of Farmersville; hard bedrock is not mapped within that depth. The typical mapped bedrock depth is 43 inches, so a route may meet weathered material even where hard rock is not mapped. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 3 percent of the area, making Elm Creek and other drainage crossings worth checking. High steel corrosion risk covers 80 percent. HDPE avoids that steel corrosion concern, while the line owner selects any casing or tracer wire coating. The map also shows Cenozoic silty clay decomposition residuum, which can be sticky and expansive.

What does it take to bore Farmersville clay?

Houston Black clay is the main ground condition to plan around in Farmersville. We match the fluid and reaming sequence to the ground, then keep the drill path and nearby utilities in view along roads such as Audie Murphy Parkway.

  1. With Farmersville’s heavy Houston Black clay, we use a thinner drilling fluid with polymer and ream in stages to limit sticky buildup around the reamer.
  2. Because clay can swell and grip pipe, we plan the pullback for the same day the hole is opened, especially on a route near Main Street.
  3. Where a Farmersville bore runs under pavement, we watch fluid returns and keep pressure controlled so Houston Black clay does not lift the surface.
  4. Before drilling near Audie Murphy Parkway, we expose marked utilities with hydrovac, then track the drill head from the surface and log depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What does a bore have to cross in Farmersville near Audie Murphy Parkway?

US 380, Texas State Highway 78, Texas State Highway 78 Business and FM 2194 are mapped inside Farmersville. A highway route needs its own crossing plan, with the bore placed under the roadway rather than through existing pavement. Audie Murphy Parkway is the longest named street in the city at 7.63 miles. Main Street runs 5.32 miles, and Hamilton Street runs 1.32 miles. For a proposed crossing along Main Street, we hydrovac pothole every marked utility before drilling near it; paint shows where a line runs, not its depth.

CrossingTypeMapped extentWho has a say
US 380US highway8.2 roadway miles insideState highway office
Texas State Highway 78State highway18 roadway miles insideState highway office
Texas State Highway 78 BusinessState highway1.5 roadway miles insideState highway office
FM 2194State highway0.7 roadway miles insideState highway office
CPKC (Kansas City Southern)Railroad2.52 track miles insideThe railroad
Elm CreekStream1.06 channel miles insideChecked for Corps of Engineers jurisdiction
Groves CreekStream0.45 channel miles insideChecked for Corps of Engineers jurisdiction
Lee CreekStream0.14 channel miles insideChecked for Corps of Engineers jurisdiction
Brushy CreekStream0.06 channel miles insideChecked for Corps of Engineers jurisdiction
Hickory CreekStream0.02 channel miles insideChecked for Corps of Engineers jurisdiction
East Fork Trinity RiverStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Indian CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Tom Bean CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Sister Grove CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The CPKC (Kansas City Southern) Greenville Subdivision has 2.52 track miles in Farmersville, and 7 street and rail crossings are mapped in the city. A crossing needs an agreement with the railroad that owns the track, which sets the casing, depth and flagging. Elm Creek runs 1.06 channel miles inside the city; Groves Creek adds 0.45 miles, and 8 street crossings of named streams are mapped. Lavon Lake is also inside the limits, so a water crossing is checked for federal jurisdiction during planning.

Whose permission does a Farmersville bore under US 380 need?

The line owner, not the drilling contractor, applies for a TxDOT utility permit through RULIS when a Farmersville bore uses the right of way of US 380, Texas State Highway 78, Texas State Highway 78 Business or FM 2194. TxDOT Dallas District reviews it, and we provide the bore plan and profile for the utility owner’s application. TxDOT rules set cover depths: electric and communication crossings need 60 inches below the lowest crossed grade, and water crossings need 60 inches; pressurized sewer crossings also need 60 inches. The permit can require a different depth. The existing highway pavement is bored or tunneled, and highway crossings are encased. City streets belong to the incorporated city. For CPKC track or an Elm Creek crossing, the railroad agreement or a check for Corps jurisdiction shapes the plan.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Farmersville near the City of Farmersville system?

The City of Farmersville public water system uses purchased surface water and reports 2,087 service connections serving 5,312 people. The city also owns its municipal electric system. That matters when planning a water service or electric conduit route near Main Street, but the line owner still needs to be identified for a proposed conduit bore. We can install water, sewer, gas, electric conduit or fiber by boring where the route and access allow.

Line ownerWhat it isSourceSize
City of FarmersvillePublic water systemSurface water bought from another system2,087 connections, 5,312 people served
City of Farmersville municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration1,618 customers reported
Oncor Electric Delivery Company, Texas-New Mexico Power, Denton County Electric Cooperative, Fannin County Electric Cooperative, Farmers Electric Cooperative and Grayson-Collin Electric CooperativeElectric utilities reporting service in Collin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Farmersville’s median housing year at 1971. The survey estimates 36 percent of homes were built before 1960, 33 percent from 1960 to 1999 and 31 percent in 2000 or later. That mix can mean a project is replacing an older line or adding a service for newer construction. Before a bore near Audie Murphy Parkway, we expose each marked utility on the planned path with hydrovac so its depth is known.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Farmersville in relation to Josephine?

Farmersville is an incorporated city in Collin County, with 4.11 square miles of land and an elevation of 628 feet. Its ZIP code is 75442. Josephine is 7.2 miles south, and Nevada is 8.7 miles south; Princeton is 8.8 miles west. McKinney, the county seat, is 17.8 miles west. From Trinity’s Yukon, Oklahoma main office, the road distance is 224 miles and the drive is 4.6 hours. Those miles matter when scheduling equipment and crew mobilization for a Farmersville bore.

Places near Farmersville

What boring work comes up in Farmersville near Main Street?

  • Highway crossing: A bore beneath US 380 keeps the utility route below the roadway instead of opening the highway pavement.
  • Water service: A connection near the City of Farmersville water system can use a bore to pass beneath Main Street.
  • Fiber route: A fiber conduit beneath Audie Murphy Parkway can avoid cutting the long city street surface.
  • Creek crossing: A route beneath Elm Creek is planned around the channel and checked for federal jurisdiction during planning.
  • Rail crossing: A utility route beneath CPKC (Kansas City Southern) track needs the railroad’s agreement for casing, depth and flagging.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Farmersville bore near Elm Creek?

For a Farmersville quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans can show how the route meets Elm Creek or a nearby road. Those details help us understand access and where a bore can start and finish.

Price follows the job conditions, with Houston Black clay first because sticky, swelling ground can call for careful fluid control and staged reaming. Pipe or conduit size and bore length affect the equipment and sequence. Crossings and exposed utilities matter on routes near US 380 or CPKC track, as do pavement, creek work and pit access at Elm Creek. Excavator time and sand backfill can change the scope, and the 224 road miles from Yukon affect mobilization.

Questions people ask about boring in Farmersville

Does Trinity take directional boring work in Farmersville and Collin County?

Yes. We take directional boring and horizontal directional drilling (HDD) work in Farmersville, and the 224 road miles from our Yukon office shape crew and equipment scheduling. We use our own crews and vetted drilling partners for field work, while you deal with Trinity from the first call through the bore log.

Does Houston Black soil in Farmersville corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 80 percent of Farmersville, much of it Houston Black ground. HDPE is not subject to that soil corrosion concern. For steel casing or tracer wire, the line owner decides whether a coating is appropriate for the route.

What ground will a bore pass through in Farmersville Houston Black soil?

Houston Black is the leading mapped soil series in Farmersville. At about 40 inches below the surface, clay makes up 80 percent of mapped texture, with clay loam at 10 percent. That heavy clay can stick to the reamer and swell around pipe, so fluid, staged reaming and pullback timing matter.

Is there rock under Farmersville, and how shallow is mapped bedrock?

The USDA soil survey maps weathered bedrock within 60 inches in 15 percent of Farmersville, with typical bedrock depth at 43 inches. Hard bedrock is not mapped within that depth. A bore may still encounter weathered material, so the route and drilling response need to account for the mapped ground.

Who approves a Farmersville bore under US 380?

The utility line owner applies for the right of way permit through TxDOT’s RULIS system, and TxDOT Dallas District reviews it. We provide the bore plan and profile for that application. For US 380, the permit sets the approved arrangement and cover, with 60 inches required for water crossings under the state rule unless the district specifies otherwise.

What does a Farmersville bore under CPKC (Kansas City Southern) track require?

The CPKC (Kansas City Southern) Greenville Subdivision has 2.52 track miles in Farmersville. Before a bore under that track, the railroad that owns it must agree to the crossing. Its agreement sets casing, depth and flagging, which become part of the crossing plan.

How much notice does Farmersville need for a bore near Audie Murphy Parkway?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. A ticket for an Audie Murphy Parkway bore needs renewing if the start slips more than 14 days past the original notice. If marks wear off or move, request refreshed marks before work continues.

Does the distance from Josephine change a Farmersville boring job?

Farmersville is 224 road miles and a 4.6 hour drive from our Yukon, Oklahoma main office; Josephine is 7.2 miles south of Farmersville. The Yukon distance can affect mobilization and scheduling, but the bore scope still depends on the route, ground, access and crossings.

What affects the cost of directional boring in Farmersville under US 380?

The price depends on the Farmersville job conditions, not one standard figure. Length, pipe size and Houston Black clay are key factors, along with utilities to expose, pavement, pits, excavator time and creek crossings such as Elm Creek. A US 380 crossing and the 224 road miles from Yukon can also affect the plan and mobilization.

Where the Farmersville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Farmersville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Farmersville, Texas

Type the address of your job in Farmersville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Farmersville

Same county: Plano · McKinney · Frisco · Allen · Wylie · Dallas · Celina · Richardson · Prosper · Anna · Melissa · Murphy. All counties: Texas county list.