Anna Texas Directional Boring: Houston Black Soil, East Fork Trinity River, US 75
Quick Answer: US 75, the Dallas, Garland and Northeastern Railroad, and East Fork Trinity River are crossings we plan around; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Anna, Texas. Anna is 203 road miles from our Yukon, Oklahoma main office, with Houston Street as one local route reference. The Houston Black soil mapped across Anna can make clay cling to the reamer. We stage the reaming and manage fluid so the hole is ready for the line.
Anna bores at a glance
- Incorporated city in Collin County, Texas. Population 31,986 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 203 miles, about 4.1 hours of driving.
- Ground: Houston Black soil is mapped on 55 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 33 percent of the area.
- Highways inside the boundary: US 75, FM 455, Texas State Highway 5, Texas State Highway 121 and FM 2862. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: Dallas, Garland and Northeastern Railroad, with 7 mapped street and rail crossings.
- Named streams inside the boundary: East Fork Trinity River, Sister Grove Creek, Throckmorton Creek and Slayter Creek.
- Public water: City of Anna, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near the East Fork Trinity River in Anna?
We take directional boring work in Anna, Collin County, where the Census Bureau Vintage 2024 estimate puts the population at 31,986. We install water and sewer lines, gas lines, electric conduit and fiber; along Houston Street or near US 75, the route and existing utilities determine where entry and exit pits can go. We also handle service lines and larger casing, with the bore planned to fit the job.
Our main office is in Yukon, Oklahoma, and Anna work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters around City of Anna water connections and electric lines reported in Collin County. For directional boring planning in Anna, our family business began in 1965, and we have done directional boring since 1982.

What is Houston Black soil like to bore in Anna?
The USDA soil survey maps Houston Black soil across 55 percent of Anna, and Houston Black clay map units cover 41 percent of the city. At about 40 inches below the surface, clay is mapped across 61 percent of the area, with an average clay content of 53 percent at that depth. In Anna, we treat mapped soil patterns as context only, not as test borings. For a bore near Houston Street, sticky clay can ball up on the reamer and swell against pipe, so we plan staged reaming and keep the pullback ready.
| USDA soil survey, inside the Anna city limits | What is mapped |
|---|---|
| Soil series mapped | Houston Black 55 percent, Austin 27 percent, Eddy 4 percent and Tinn 4 percent |
| Texture at the surface | clay 61 percent, silty clay 32 percent and gravelly clay loam 4 percent |
| Texture about 40 inches down | clay 61 percent, bedrock 33 percent and silty clay 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 62 percent and lean clay (CL) 4 percent |
| Average clay content about 40 inches down | 53 percent |
| Bedrock mapped within 60 inches | 33 percent of the area (0 percent hard rock, 33 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 95 percent of the area |
The USDA soil survey maps bedrock within 40 inches in 33 percent of Anna; the soil data also gives a typical bedrock depth of 25 inches. The mapped unit is Austin Chalk, a Late Cretaceous formation, so a route may move from clay into slower, weathered chalk. A seasonal water table within 60 inches is not mapped, while flood prone soils cover 6 percent of the city, including ground to consider near East Fork Trinity River. High steel corrosion risk is mapped across 95 percent, so the line owner should address casing and tracer wire materials.
How do crews bore Anna clay without losing the line?
Houston Black clay can stay open yet cling to the reamer or grip the pipe. Near East Fork Trinity River, we plan the bore depth and crossing approach around mapped ground and the channel.
- On Houston Black clay, we use staged reaming and adjust drilling fluid so sticky cuttings do not load the reamer or grip the pipe.
- Before drilling near a marked line, we hydrovac pothole it; a planned bore under Houston Street needs exposed utilities because surface paint does not show depth.
- Near East Fork Trinity River, we track the drill head from the surface and log depth and pitch to hold the planned route under the channel.
- Where an Anna route meets Austin Chalk, we allow for slower drilling through weathered chalk and watch the soil to rock transition for steering changes.

What does a bore have to cross in Anna near Dallas, Garland and Northeastern Railroad?
US 75, FM 455, Texas State Highway 5, Texas State Highway 121, FM 2862 and FM 545 run within Anna, so a route can involve state highway right of way as well as local streets. Houston Street is the longest named street in the city at 7.24 miles; Powell Parkway and Foster Crossing Boulevard are also long street corridors. A crossing beneath any of these roads needs a plan that keeps the pavement intact and places the pits outside the travel path where the site allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 75 | US highway | 9.4 roadway miles inside | State highway office |
| FM 455 | State highway | 15.3 roadway miles inside | State highway office |
| Texas State Highway 5 | State highway | 10 roadway miles inside | State highway office |
| Texas State Highway 121 | State highway | 9.6 roadway miles inside | State highway office |
| FM 2862 | State highway | 8.1 roadway miles inside | State highway office |
| FM 545 | State highway | 0.2 roadway miles inside | State highway office |
| Dallas, Garland and Northeastern Railroad | Railroad | 4.86 track miles inside | The railroad |
| East Fork Trinity River | Stream | 8.07 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sister Grove Creek | Stream | 7.74 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Throckmorton Creek | Stream | 4.53 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Slayter Creek | Stream | 3.88 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hurricane Creek | Stream | 2.41 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sweetwater Creek | Stream | 1.7 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Whites Creek | Stream | 1 channel miles inside | Checked for Corps of Engineers jurisdiction |
The Dallas, Garland and Northeastern Railroad has 4.86 track miles in Anna, and public maps show 7 street and rail crossings in the city. A bore under its tracks needs the railroad owner’s agreement. East Fork Trinity River runs 8.07 channel miles within Anna, and 33 mapped street crossings intersect named streams. Creek routes need depth planning and a check for U.S. Army Corps of Engineers jurisdiction; mapped lakes and ponds are not listed within one mile.
Who permits a bore in Anna and Collin County?
Anna is incorporated, so the city itself is responsible for its city streets, including Houston Street and Foster Crossing Boulevard. For work in the right of way of US 75, FM 455, Texas State Highway 5, Texas State Highway 121, FM 2862 or FM 545, the utility owner files the application in TxDOT’s online RULIS system; the TxDOT Dallas District reviews it. We give the line owner the bore plan and profile and work under the permit issued to that owner. TxDOT cover requirements depend on line type and crossing: electric and communication lines need 60 inches below the lowest crossed grade, water lines need 60 inches, and pressurized sewer lines need 60 inches. Railroad work needs the Dallas, Garland and Northeastern Railroad’s agreement, while a creek route such as East Fork Trinity River is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Anna water lines?
The City of Anna public water system uses purchased surface water and reports 7,874 service connections serving 23,960 people. Those connections make a water service route near Houston Street a reason to locate and expose existing lines before drilling close to them. Electric utilities reporting service in Collin County are Oncor Electric Delivery Company, Texas-New Mexico Power, Denton County Electric Cooperative, Fannin County Electric Cooperative, Farmers Electric Cooperative and Grayson-Collin Electric Cooperative. We confirm the line owner for a conduit bore rather than assuming one provider serves every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Anna | Public water system | Surface water bought from another system | 7,874 connections, 23,960 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Denton County Electric Cooperative, Fannin County Electric Cooperative, Farmers Electric Cooperative and Grayson-Collin Electric Cooperative | Electric utilities reporting service in Collin County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Anna’s median housing year at 2010; 87 percent of housing units were built in 2000 or later, and 1 percent before 1960. That mix can mean new service routes as well as older lines to work around on Houston Street. We hydrovac pothole each marked utility on the bore path before the drill approaches it; for example, a proposed crossing under Houston Street needs exposed utilities because paint shows position, not depth.

How far is Anna from McKinney and our Yukon office?
Anna is an incorporated city in Collin County, at an elevation of 701 feet and covering 17.92 square miles. Its ZIP code is 75409. Melissa is 4.1 miles south, Van Alstyne is 5.4 miles north, Westminster is 5.6 miles east, and Weston is 6.6 miles west. McKinney, the county seat and nearest larger city, is 12.0 miles southwest. The Yukon yard is 203 road miles away, a 4.1 hour drive, so distance is part of planning a bore near US 75 or East Fork Trinity River.
Places near Anna
- Directional boring in Melissa: 4.1 miles south
- Directional boring in Van Alstyne: 5.4 miles north
- Westminster: 5.6 miles east
- Weston: 6.6 miles west
- New Hope: 9.4 miles south
- Directional boring in McKinney: 12 miles southwest
What boring work comes up along Houston Street in Anna?
- Highway crossing: A bore beneath US 75 uses a planned route and pits that avoid cutting through the existing roadway.
- Water service: A connection near the City of Anna system needs existing water lines exposed before the drill approaches the service path.
- Fiber conduit: Along Houston Street, a fiber bore can pass beneath pavement while marked utilities are pothole exposed first.
- Creek crossing: At East Fork Trinity River, the bore plan accounts for channel depth and a jurisdiction check during planning.
- Rail crossing: A route beneath the Dallas, Garland and Northeastern Railroad depends on the track owner’s crossing agreement.
- Street service: Near Foster Crossing Boulevard, directional boring can place a line beneath the street without opening a trench through its surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a bore near US 75 in Anna?
For a quote near US 75 or Houston Street, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. Those details let us compare the proposed route with the road, track or creek crossing and identify what needs more review.
The price follows the work, not just the length. Houston Black clay can change reaming and fluid needs; a US 75 or Dallas, Garland and Northeastern Railroad crossing adds crossing requirements, and a creek route near East Fork Trinity River affects depth planning. Pipe size, utility exposure, pavement, pits, excavator time, sand backfill and emergency timing also shape the scope. Anna’s 203 road miles from Yukon can affect mobilization.
Questions people ask about boring in Anna
Does Trinity Boring Solutions take directional boring jobs in Anna and Collin County?
Yes. We take work in Anna, and our crews work with partner drilling contractors from satellite yards as needed. The Yukon, Oklahoma office remains the main office, and you deal with Trinity from the first call through the bore log. A route near Houston Street still gets planned for its specific ground and utilities.
Who owns the Anna track at the Dallas, Garland and Northeastern Railroad, and what does a bore need?
The Dallas, Garland and Northeastern Railroad owns the 4.86 track miles mapped in Anna. A bore beneath the track needs an agreement from that railroad, which sets the crossing conditions such as casing, depth and flagging. If the route also uses highway right of way near US 75, TxDOT asks for a copy of the railroad agreement.
Can a line be bored beneath East Fork Trinity River in Anna?
A bore can be planned beneath East Fork Trinity River if the route, ground and crossing conditions work. The river runs 8.07 channel miles within Anna, so the plan must set a depth below the channel and check for U.S. Army Corps of Engineers jurisdiction. We also track and log the bore as it advances.
When we plan underground work in Anna, who runs the public water system, and where does its water come from?
The City of Anna owns the public water system, and its purchased surface water is relevant when we plan underground work. It reports 7,874 service connections serving 23,960 people. A proposed bore near Houston Street should account for existing system lines, which we expose before drilling close to them.
Which electric utility serves my Anna address in Collin County, and who confirms conduit specs?
Several providers report electric service in Collin County: Oncor Electric Delivery Company, Texas-New Mexico Power, Denton County Electric Cooperative, Fannin County Electric Cooperative, Farmers Electric Cooperative and Grayson-Collin Electric Cooperative. The line owner must be confirmed for the specific address and should confirm conduit specifications before a bore near US 75 is planned.
Does the city or county control Foster Crossing Boulevard in Anna, and must it be cut?
Anna is incorporated, so the city itself is responsible for its city streets, including Foster Crossing Boulevard. A directional bore can pass below the street without trenching through its pavement; entry and exit pits sit off the crossing where the site allows. Existing utilities still need exposure before drilling near them.
Can I reach Trinity after hours about an urgent bore near Foster Crossing Boulevard in Anna?
Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, including for urgent work near Foster Crossing Boulevard. Tell us the location and what line needs to go in; emergency timing and the route’s pavement, utilities or creek crossings can affect the work plan.
How much notice does Texas811 need before a bore near Houston Street in Anna?
For a bore near Houston Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. When planning work in Anna, if the start slips more than 14 days past the original notice, we make a new request. Before work continues in Anna, we refresh worn or moved marks through Texas811.
What affects the cost of a directional bore near US 75 in Anna?
The scope sets the cost: Houston Black clay, pipe size and bore length affect the drilling work, while US 75 crossings, exposed utilities and pavement affect planning and access. East Fork Trinity River can add creek crossing considerations, and the 203 road miles from Yukon affect mobilization. Pit work, equipment time and emergency timing also matter.
Where the Anna facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Anna
- U.S. Census Bureau, TIGER/Line 2024: Anna boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Anna
- U.S. Census Bureau, American Community Survey 2019 to 2023: Anna housing units and year built
- Macrostrat geologic map compilation: map units under Anna
- U.S. EPA Safe Drinking Water Information System: public water systems serving Anna
- U.S. Department of Transportation, North American Rail Network: track owners in Collin County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Collin County
- U.S. Geological Survey, Elevation Point Query Service: Anna elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Anna
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Anna
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Anna, Texas
Type the address of your job in Anna. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
