Richardson Texas Directional Boring: Houston Black Clay, US 75 And Cottonwood Creek
Quick Answer: Where US 75 crosses Richardson, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Texas utility routes without cutting the highway pavement. The Yukon, Oklahoma main office is 217 road miles away, so a bore near Plano needs its mobilization included in the plan. Houston Black soil and Richardson’s clay ground can cling to the reamer, so we manage fluid and pull pipe promptly.
Richardson bores at a glance
- Incorporated city in Dallas County and Collin County, Texas. Population 118,221 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 217 miles, about 4.3 hours of driving.
- Ground: Houston Black soil is mapped on 52 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 39 percent of the area.
- Highways inside the boundary: US 75, Texas State Highway 190 and FM 2551. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: CPKC (Kansas City Southern), Dallas Area Rapid Transit (DART) and Dallas, Garland and Northeastern Railroad, with 53 mapped street and rail crossings.
- Named streams inside the boundary: Cottonwood Creek, Beck Branch, Duck Creek and Canyon Creek.
- Public water: City of Richardson, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near US 75 in Richardson?
Richardson is in Dallas and Collin counties, and the Census Bureau Vintage 2024 estimate puts its population at 118,221. We install water, sewer, gas, electric conduit and fiber for routes beneath Belt Line Road, near US 75, or between properties in Richardson. The route and line type set the bore plan, especially where existing services share a street corridor.
Our main office is in Yukon, Oklahoma, and Richardson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982, while accounting for Richardson’s public water system in utility planning. Our record of no utility strikes in over 25 years is the standard we bring to work planned around City of Richardson water lines and electric lines in Dallas County.

What does Houston Black soil mean for a bore in Richardson?
The USDA soil survey maps Houston Black as 52 percent of Richardson’s soil series. Its Houston Black clay map unit covers 18 percent, while the Houston Black Urban land complex covers 30 percent. At about 40 inches below the surface, clay is mapped across 55 percent and silty clay across 5 percent; bedrock is mapped across 39 percent. The survey also identifies CH soil across 59 percent at that depth. We treat Richardson mapped patterns as planning references, not test borings, and verify conditions before laying out a bore. Sticky clay can ball on a reamer, so we plan staged reaming and fluid control.
| USDA soil survey, inside the Richardson city limits | What is mapped |
|---|---|
| Soil series mapped | Houston Black 52 percent, Austin 28 percent, Eddy 5 percent, Lewisville 4 percent and Dalco 4 percent |
| Texture at the surface | clay 59 percent, silty clay 36 percent and gravelly clay loam 3 percent |
| Texture about 40 inches down | clay 55 percent, bedrock 39 percent and silty clay 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 59 percent |
| Average clay content about 40 inches down | 53 percent |
| Bedrock mapped within 60 inches | 39 percent of the area (0 percent hard rock, 39 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 95 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 39 percent of Richardson; hard bedrock is not mapped within that depth. That calls for checking the bore profile rather than assuming rock is absent at greater depth. No seasonal water table is mapped within 60 inches, and flood prone soils cover 3 percent. High steel corrosion risk is mapped across 95 percent, so the line owner should choose any casing or tracer wire protection; HDPE avoids that soil corrosion concern. The geologic map identifies Austin Chalk, a Late Cretaceous unit, which can slow drilling if encountered.
How do we drill Richardson’s clay ground?
Houston Black clay makes fluid control and timing matter in Richardson. We plan the route, expose marked utilities, then steer and log the bore so the line can pass below streets and other mapped features.
- On Houston Black clay, we use thinner drilling fluid, open the hole through staged reaming, and pull pipe the same day so sticky soil has less time to grip it.
- Because heavy clay is common in Richardson, we watch fluid returns and keep pressure controlled near pavement to reduce the chance of lifting a slab.
- At Cottonwood Creek, we plan the path below the channel and check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
- Before drilling near a marked line along Renner Road, we hydrovac expose it; a surface locator tracks the drill head while we log depth and pitch.

Which roads, tracks or creeks affect bores in Richardson near Cottonwood Creek?
US 75 runs 10.5 mapped roadway miles through Richardson, and Texas State Highway 190 runs 12.1 miles; FM 2551 adds 1.3 miles. Interstate 635 is 0.5 miles outside the city limits, while Texas State Highway 78 is 1.1 miles away. Renner Road is the longest named street at 15.95 miles in the city, followed by Belt Line Road at 10.65 miles and Arapaho Road at 10.15 miles. Those corridors call for accurate profiles and access planning. Under existing highway pavement, utility work is bored or tunneled rather than open cut.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 75 | US highway | 10.5 roadway miles inside | State highway office |
| Texas State Highway 190 | State highway | 12.1 roadway miles inside | State highway office |
| FM 2551 | State highway | 1.3 roadway miles inside | State highway office |
| Interstate 635 | Highway nearby | 0.5 miles outside | State highway office |
| Texas State Highway 78 | Highway nearby | 1.1 miles outside | State highway office |
| CPKC (Kansas City Southern) | Railroad | 8.65 track miles inside | The railroad |
| Dallas Area Rapid Transit (DART) | Railroad | 5.31 track miles inside | The railroad |
| Dallas, Garland and Northeastern Railroad | Railroad | 0.89 track miles inside | The railroad |
| Cottonwood Creek | Stream | 4.56 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Beck Branch | Stream | 2.86 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Duck Creek | Stream | 2.79 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Canyon Creek | Stream | 2.63 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rowlett Creek | Stream | 1.81 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Floyd Branch | Stream | 0.98 channel miles inside | Checked for Corps of Engineers jurisdiction |
Richardson has 8.65 track miles owned by CPKC (Kansas City Southern), 5.31 miles of Dallas Area Rapid Transit track and 0.89 miles of Dallas, Garland and Northeastern Railroad track. Public records map 53 street and rail crossings in the city, so a route near a track needs the owning railroad identified. Cottonwood Creek runs 4.56 channel miles here, and 56 street crossings of named streams are mapped. No lakes or ponds are mapped within one mile of Richardson.
Who approves a bore in Richardson and Dallas County?
For a bore beneath US 75 or Texas State Highway 190, TxDOT’s Dallas District reviews the utility permit because those highways cross Richardson. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. Richardson is incorporated, so streets such as Belt Line Road are city streets. A crossing of CPKC (Kansas City Southern) track needs an agreement from that railroad, which sets crossing conditions. At Cottonwood Creek, we check for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are relevant to a bore near the City of Richardson water system?
The City of Richardson public water system serves 122,615 people through 58,307 service connections and uses purchased surface water. That network means a new bore must be planned around water lines near the route. Electric utilities reporting service in Dallas County include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative. We confirm the line owner before planning a conduit bore; those county reports do not identify the provider at every Richardson address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Richardson | Public water system | Surface water bought from another system | 58,307 connections, 122,615 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Dallas County and Collin County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Richardson’s median housing year at 1985, so we verify underground conditions before planning a bore. The estimates show 7 percent of homes built before 1960, 63 percent from 1960 to 1999, and 30 percent in 2000 or later. Replacement work along Belt Line Road may meet older services, while newer construction can call for new connections. Before the drill approaches a marked utility, we expose it by hydrovac; along Belt Line Road, paint shows the route, not the line’s depth.

Do you cover Richardson and nearby Plano?
Richardson spans Dallas and Collin counties, covers 28.56 square miles and sits at an elevation of 637 feet. The city’s ZIP codes are 75080, 75081 and 75082. Plano is 5.9 miles northwest and is the nearest larger city; Garland is 6.2 miles southeast. Dallas, the Dallas County seat, is 12.8 miles south. Richardson is 217 road miles and 4.3 drive hours from our Yukon, Oklahoma main office, so distance is part of planning mobilization for a job here.
Places near Richardson
- Directional boring in Plano: 5.9 miles northwest
- Directional boring in Garland: 6.2 miles southeast
- Directional boring in Murphy: 6.5 miles northeast
- Directional boring in Addison: 7.3 miles west
- Directional boring in Sachse: 7.5 miles east
Which jobs call for a bore near Belt Line Road in Richardson?
- Highway crossing: A utility route under US 75 needs a bore profile that respects the highway pavement and the route’s access points.
- Water service: A new connection near the City of Richardson system needs its path checked against existing water lines before drilling.
- Fiber route: A fiber conduit beneath Belt Line Road can avoid opening the street while connecting properties along the corridor.
- Creek crossing: A route beneath Cottonwood Creek needs a planned depth and a jurisdiction check before the crossing is set.
- Rail crossing: A bore beneath CPKC (Kansas City Southern) track requires an agreement with the railroad that owns the line.
- Street replacement: A replacement service near Renner Road can use a bore to pass beneath pavement while marked utilities are exposed first.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Richardson work near CPKC (Kansas City Southern)?
Start with a map pin, especially for a route near CPKC (Kansas City Southern) track or Cottonwood Creek; the exact spot shows which crossing and access points the plan must address. We need to know what goes in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the route and prepare a useful scope.
A defined route with clear access and no creek, track or marked utility conflicts is the simplest Richardson bore to plan. The price depends on length, pipe or conduit size, Houston Black clay or bedrock, and the utilities that must be exposed. Concrete or pavement near US 75, a Cottonwood Creek crossing, pits, excavator time and sand backfill can add work. The 217 road miles from Yukon also affect mobilization, as can high profile or emergency conditions.
Questions people ask about boring in Richardson
Does Trinity take directional boring jobs in Richardson and Dallas County, and who staffs them?
Yes. We take directional boring work in Richardson, including jobs in Dallas County, and staff it with our own crews or vetted partner drilling contractors working from satellite yards. Our Yukon, Oklahoma main office remains the point of contact from the first call through the bore log, whichever crew is on site.
What do Richardson homes near Belt Line Road mean for replacement bores?
Richardson’s median housing year is 1985, according to the American Community Survey 2019 to 2023 five year estimates. With 7 percent of homes built before 1960 and 63 percent from 1960 to 1999, a replacement route near Belt Line Road may encounter established services. Before drilling near marked utilities in Richardson, we expose them to verify clearance and protect the planned bore path.
Can Houston Black soil in Richardson corrode steel pipe, and what pipe can we use?
The USDA soil survey maps high steel corrosion risk across 95 percent of Richardson. The line owner selects any coating for steel casing or tracer wire; HDPE avoids that soil corrosion concern. Houston Black soil is also sticky, so the bore plan must account for how clay handles drilling fluid and the reamer.
What ground does a bore pass through in Richardson, including Houston Black soil at depth?
The USDA soil survey maps Houston Black across 52 percent of Richardson’s soil series. At about 40 inches below the surface, clay is mapped across 55 percent, silty clay across 5 percent and bedrock across 39 percent. Sticky clay can ball on the reamer, so staged reaming and fluid control matter.
Will a Richardson bore hit rock, and how much bedrock is mapped in the top five feet?
The USDA soil survey maps bedrock within 60 inches across 39 percent of Richardson, and identifies it as weathered bedrock; hard bedrock is not mapped within that depth. Austin Chalk is the mapped geologic unit named for the area, with a Late Cretaceous age. If the bore reaches rock, drilling can slow compared with clay.
Who approves a Richardson bore under US 75, and which state office reviews it?
TxDOT’s Dallas District reviews utility permits for work in the US 75 right of way in Richardson. The utility owner files the application through TxDOT’s RULIS system, while we provide the bore plan and profile and work under the permit issued to that owner. The permit can set the required crossing depth.
What bore sizes and lengths can Trinity handle for a job near Richardson’s Campbell Road?
We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a route near Campbell Road, send the size, footage and what will go in the ground so we can plan around the actual scope and nearby utilities.
How much Texas811 notice does a Richardson bore near Renner Road need, and what if marks move?
For a bore near Renner Road, request Texas811 locates at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Richardson work, if our start slips more than 14 days past the original notice, we submit a new request. If marks are worn or moved in Richardson, we have them refreshed through Texas811 before work continues.
What affects the cost of directional boring near US 75 in Richardson when we plan a crossing?
The route and scope set the cost, not just the length. A bore near US 75 may need added planning for pavement, crossings and utility exposures. Other factors include pipe size, Houston Black clay or bedrock, creek crossings, pits, excavator time, sand backfill and mobilization from the Yukon office, 217 road miles away.
Where the Richardson facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Richardson
- U.S. Census Bureau, TIGER/Line 2024: Richardson boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Richardson
- U.S. Census Bureau, American Community Survey 2019 to 2023: Richardson housing units and year built
- Macrostrat geologic map compilation: map units under Richardson
- U.S. EPA Safe Drinking Water Information System: public water systems serving Richardson
- U.S. Department of Transportation, North American Rail Network: track owners in Dallas County and Collin County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Dallas County and Collin County
- U.S. Geological Survey, Elevation Point Query Service: Richardson elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Richardson
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Richardson
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Richardson, Texas
Type the address of your job in Richardson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
