trinityboringsolutions.com

Welch Texas Directional Boring: Amarillo Soil, Texas State Highway 137, Sandy Clay Loam

Quick Answer: Cr F, Juniper Street and Main Street are Welch’s longest named streets; 16.4 public road miles lie inside the mapped community boundary, and Texas State Highway 137 runs through Welch. We take directional boring, also called horizontal directional drilling (HDD), beneath Texas State Highway 137 and local streets in Welch, Texas. Welch is 411 road miles from our Yukon, Oklahoma main office, with FM 829 also inside the community. Amarillo soil covers much of Welch, and sandy clay loam about 40 inches down calls for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Welch bores at a glance

  • Unincorporated community in Dawson County, Texas. Population 234 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 411 miles, about 8 hours of driving.
  • Ground: Amarillo soil is mapped on 64 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 137, FM 829, Texas State Highway 83, FM 2053 and FM 179. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Welch Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Texas State Highway 137 in Welch?

Welch is an unincorporated census designated place in Dawson County, where the 2020 Census counted 234 people; the Census Bureau does not publish yearly estimates for unincorporated places. We bore water, sewer, gas, electric conduit and fiber lines beneath Main Street, Juniper Street or Texas State Highway 137, with the route shaped by the address and access.

Our main office is in Yukon, Oklahoma, and Welch work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965 and has done directional boring since 1982; the range from 3/4 inch service lines to 48 inch casing can suit work beneath Main Street or Texas State Highway 137.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Welch’s Amarillo soil?

The USDA soil survey maps Amarillo soil across 64 percent of Welch, Patricia across 28 percent, Portales across 5 percent and Arvana across 3 percent. At about 40 inches below the surface, 92 percent of the mapped area has sandy clay loam; the average clay content there is 24 percent. Surface textures are mostly fine sandy loam at 64 percent, with loamy fine sand at 31 percent and loam at 5 percent. These mapped units guide planning, but the ground at a specific Main Street bore still needs to be checked.

USDA soil survey, inside the Welch mapped community boundaryWhat is mapped
Soil series mappedAmarillo 64 percent, Patricia 28 percent, Portales 5 percent and Arvana 3 percent
Texture at the surfacefine sandy loam 64 percent, loamy fine sand 31 percent and loam 5 percent
Texture about 40 inches downsandy clay loam 92 percent, loam 5 percent and very gravelly loam 3 percent
Engineering class about 40 inches downlean clay (CL) 69 percent, clayey sand (SC) 28 percent and clayey gravel (GC) 3 percent
Average clay content about 40 inches down24 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel1 percent of the area

For Welch, bedrock is not mapped within 60 inches, and the survey also maps no seasonal water table or flood prone soils within that depth. High steel corrosion risk is mapped in 1 percent of the area, so the line owner should consider casing and tracer wire material or coating. The Cenozoic Blackwater Draw Formation is described as fine to medium quartz sand with local clay and caliche; Paleocene sedimentary rocks are also mapped. That calls for checking the actual bore route rather than assuming uniform soil.

How do crews handle Welch’s sandy clay loam?

Amarillo and Patricia soils put fine sandy loam over sandy clay loam around 40 inches down. For a bore near Main Street, we adapt fluid and reaming to changing ground, then check marked utilities and track the drill head as it advances.

  1. With sandy clay loam mapped across 92 percent of Welch at about 40 inches, we use controlled fluid and staged reaming to manage sticky clay as the hole opens.
  2. Fine sandy loam and loamy fine sand cover much of Welch, so we use drilling fluid to support the hole and have the pipe ready before the final ream.
  3. Before the drill approaches a marked line, we hydrovac pothole it; a planned route beneath Juniper Street needs exposure because paint does not show burial depth.
  4. As a bore advances beside Texas State Highway 137, we track the head from the surface and log its depth and pitch to keep the alignment checked.
Bobcat E35 mini excavator lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in northeast Oklahoma City
Lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in Oklahoma City.

Where might a line pass beneath Texas State Highway 137 in Welch?

Texas State Highway 137 has 1.8 mapped roadway miles inside Welch; FM 829 has 1.2, Texas State Highway 83 has 0.9, and FM 2053 and FM 179 each have 0.7. The named streets include Cr F at 1.07 miles, Juniper Street at 0.86 and Main Street at 0.84. A bore beneath any of these routes needs its alignment and entry pits set with the road edge and existing utilities in mind. Texas State Highway 137 is the main state highway crossing to plan around.

CrossingTypeMapped extentWho has a say
Texas State Highway 137State highway1.8 roadway miles insideState highway office
FM 829State highway1.2 roadway miles insideState highway office
Texas State Highway 83State highway0.9 roadway miles insideState highway office
FM 2053State highway0.7 roadway miles insideState highway office
FM 179State highway0.7 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Welch or within 1 mile outside the community, and no mapped street and rail crossings are shown. No streams are mapped inside or within 1 mile, and none of the named streets is mapped crossing a stream. No lakes or ponds are mapped within 1 mile either. That means the mapped community has no rail or water feature crossing to plan for, though the route still needs to be checked against the actual site.

Who approves a bore in Welch and Dawson County?

Welch has no city government, so Main Street and Cr F fall under county authority, while Texas State Highway 137 is a state route. Work in the highway right of way needs a TxDOT utility permit reviewed by the TxDOT Lubbock District. The utility owner, not the drilling contractor, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for work under the permit issued to that owner. TxDOT rules require highway crossings to be bored or tunneled, with casing, and call for cover depths that depend on line type. No railroad or stream crossing is mapped in Welch.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities in Welch connect to Welch Water Supply Corporation?

Welch Water Supply Corporation uses groundwater wells and reports 105 service connections serving 315 people. Those local water lines may matter when planning work along Juniper Street or another route. Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric Cooperative report electric service in Dawson County, but that does not identify the provider at every address. We confirm the line owner before planning an electric conduit bore near Texas State Highway 137 or any street.

Line ownerWhat it isSourceSize
Welch Water Supply CorporationPublic water systemGroundwater wells105 connections, 315 people served
Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric CooperativeElectric utilities reporting service in Dawson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Welch’s median housing year at 1967; 17 percent of homes were built before 1960, 61 percent from 1960 to 1999, and 22 percent in 2000 or later. That mix can mean a replacement bore as well as a new service. Before drilling near a marked line under Juniper Street, we expose each marked utility on the bore path with hydrovac potholing, since surface paint does not show its depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Welch and Lamesa?

Welch is in Dawson County at an elevation of 3,119 feet, and its mapped community covers 1.46 square miles in ZIP code 79377. Loop is 17.0 miles west, Lamesa is 17.0 miles southeast, O’Donnell is 17.1 miles east, and Brownfield is 18.8 miles northwest. Lamesa is both the county seat and the nearest larger city. From our Yukon yard, Welch is 411 road miles away, an 8.0 hour drive; that distance is part of planning a crew mobilization for work near Cr F or Texas State Highway 137.

Places near Welch

What could we bore beneath Main Street in Welch?

  • Highway crossing: A bore beneath Texas State Highway 137 stays below the pavement, with the alignment planned for the right of way and travel lanes.
  • Water service: A connection near Welch Water Supply Corporation needs a route checked against existing groundwater system lines before drilling.
  • Street utility bore: A water or sewer line beneath Main Street can avoid an open cut across the paved route when pits fit on either side.
  • Fiber conduit: A conduit route along Juniper Street needs marked utilities exposed before the drill approaches them.
  • Electric conduit: A crossing near FM 829 starts by confirming the line owner and then coordinating any required state highway right of way permit.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to price a bore near Cr F in Welch?

Pin the exact spot along Cr F or Texas State Highway 137; the road edge and any right of way affect the route and access we need to plan. Tell us what will go in the ground, the pipe or conduit size and the footage. A sketch or plans can help us understand the alignment and where the pits might fit.

Mobilization starts with the 411 road miles from Yukon, then the scope on the ground in Welch. Amarillo and Patricia soils affect drilling conditions, while a crossing under Texas State Highway 137 can add permit and casing needs. Price also reflects footage, line size, utilities to expose, pavement or concrete, creek or drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can add planning demands, too.

Questions people ask about boring in Welch

Does Trinity Boring Solutions take jobs in Welch, Dawson County, and who staffs them?

Yes. We take directional boring work in Welch and Dawson County. Our own crews handle jobs, and partner drilling contractors from vetted satellite yards can also staff the work. You coordinate with Trinity from the first call through the bore log, whether the route is near Main Street or Texas State Highway 137.

Who owns electric lines in Welch, Dawson County, and who confirms conduit specs?

The line owner depends on the address. Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric Cooperative report electric service in Dawson County, but those records do not identify the provider at every Welch property. We confirm the owner and conduit requirements before planning a bore near Cr F or another street.

Who is responsible for Main Street in Welch, and does a bore require cutting it?

Welch has no city government, so Main Street is under county authority rather than a city street department. Directional boring can pass beneath the road without an open cut, with entry and exit pits placed outside the traveled area when site conditions allow. The actual route and access still need review.

How do Welch’s older homes near Juniper Street affect replacement bores?

Welch’s median housing year is 1967 in American Community Survey 2019 to 2023 estimates, and 17 percent of homes date from before 1960. Older service lines may be candidates for replacement, while newer properties may need a new connection. For a bore near Juniper Street, we expose marked utilities before drilling close to them.

What ground will a bore meet in Welch’s Amarillo soil?

The USDA soil survey maps Amarillo across 64 percent of Welch, with fine sandy loam common at the surface. At about 40 inches, sandy clay loam is mapped across 92 percent of the area. That mix can require fluid and staged reaming choices suited to both the surface soil and deeper clay bearing material.

Will a bore in Welch meet rock beneath the mapped soils?

Bedrock is not mapped within 60 inches in Welch, but that does not rule out rock at greater depth. The geologic map shows the Cenozoic Blackwater Draw Formation and Paleocene sedimentary rocks. A route near Texas State Highway 83 still needs site specific assessment rather than a conclusion from the map alone.

What bore sizes and lengths can you handle near F 3 in Welch?

Our work ranges from 3/4 inch service lines to 48 inch casing, and bore lengths run from 10 feet to 5,000 feet. That range can cover a smaller service route or a larger installation near F 3, depending on access, ground conditions and the line being installed.

How much Texas811 notice is needed for a bore near Cr F in Welch?

Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as two working days. The request cannot be made earlier than 14 days before work. If a Cr F start slips more than 14 days past the original notice, make a new request, and have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore near Texas State Highway 137 in Welch?

The job scope sets the price. For a Texas State Highway 137 crossing, the permit and pavement work matter; Amarillo soil, bore length and pipe size also affect the plan. Other factors include utilities to expose, concrete, pits, excavator time, sand backfill and mobilization from Yukon, which is 411 road miles away.

Where the Welch facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Welch

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Welch, Texas

Type the address of your job in Welch. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Welch

Same county: Ackerly. All counties: Texas county list.