trinityboringsolutions.com

Cantu Addition Texas Directional Boring: Palobia Loamy Fine Sand, US 281, Una de Gato Creek

Quick Answer: Meztizo Road and Sunrise Road are the longest named streets, and we take directional boring, also called horizontal directional drilling (HDD), in Cantu Addition, Texas, for lines beneath them. From our Yukon, Oklahoma main office, the drive is 630 road miles, with US 281 just outside the mapped community boundary. Palobia loamy fine sand covers most mapped ground, while sandy clay loam at about 40 inches can affect fluid control and reaming. Una de Gato Creek is 0.5 miles from the boundary, so nearby creek work needs route review.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cantu Addition bores at a glance

  • Unincorporated community in Brooks County, Texas. Population 191 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 630 miles, about 12.3 hours of driving.
  • Ground: Palobia soil is mapped on 74 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • No state or US highway is mapped inside the boundary. Closest: US 281, US 281 Business and Texas State Highway 285.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Una de Gato Creek in Cantu Addition?

Meztizo Road and Sunrise Road are the longest named streets across 3.79 public road centerline miles inside the mapped community; no highway is mapped within it. Cantu Addition is in Brooks County, where the Census Bureau counted 191 residents in 2020. We can place water, sewer, gas, electric conduit and fiber lines along these local roads, with the route and utility crossings shaping the bore plan.

Our main office is in Yukon, Oklahoma, and Cantu Addition work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a Meztizo Road service, 3/4 inch lines are at the small end of our range, while 48 inch casing is at the large end; bore lengths run from 10 feet to 5,000 feet. Our family business began in 1965 and has drilled directionally since 1982, experience we bring to work near Sunrise Road.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Palobia soil survey show in Cantu Addition?

The USDA soil survey maps Palobia loamy fine sand across 74 percent of Cantu Addition and Nueces fine sand across 26 percent. At about 40 inches below the surface, the mapped texture is sandy clay loam across the area, with an average clay content of 27 percent. The surface is mostly loamy fine sand, so the upper part of a bore can be prone to caving. Staged reaming and drilling fluid help support the hole before the pipe is pulled.

USDA soil survey, inside the Cantu Addition mapped community boundaryWhat is mapped
Soil series mappedPalobia 74 percent and Nueces 26 percent
Texture at the surfaceloamy fine sand 74 percent and fine sand 26 percent
Texture about 40 inches downsandy clay loam 100 percent
Engineering class about 40 inches downclayey sand (SC) 100 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches74 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel74 percent of the area

Bedrock is not mapped within the top five feet in Cantu Addition, but that does not rule out deeper rock. Seasonal water table conditions are mapped within 60 inches across 74 percent of the area, which can make pits wet; none is mapped within 40 inches. In Brooks County, we plan bores knowing flood prone soils are not mapped. High steel corrosion risk is mapped across 74 percent, so the line owner should consider protection for steel casing or tracer wire; HDPE is not subject to that soil corrosion concern. The geologic map shows Holocene sand sheet, wind blown sand that can shift or cave around a bore.

How do we drill Cantu Addition’s sandy clay loam?

The Palobia and Nueces surfaces are sandy, but the USDA soil survey maps sandy clay loam at about 40 inches. We adapt fluid and reaming to the changing ground and keep the pipe ready before opening the final hole.

  1. Because Palobia loamy fine sand covers 74 percent of the mapped area, we build fluid support and ream in stages to help keep the upper hole open.
  2. At about 40 inches, Cantu Addition is mapped as sandy clay loam, so we watch the changing cut and adjust the drilling fluid as the bore advances.
  3. Seasonal water table conditions occur within 60 inches across 74 percent of the area, so we keep pits compact and pump water if they fill.
  4. Before a bore near Meztizo Road, we pothole marked utilities and track the drill head from the surface, logging depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Cantu Addition near Meztizo Road?

No highway is mapped inside the Cantu Addition boundary. US 281 is 0.4 miles outside it, US 281 Business is 0.7 miles away, and Texas State Highway 285 is 1.5 miles away. Those roads can affect access and permitting if a route reaches their right of way. Meztizo Road, at 0.57 miles, and Sunrise Road, at 0.51 miles, are the longest named streets. A bore along either street still needs a route check for existing buried lines and pavement.

CrossingTypeMapped extentWho has a say
US 281Highway nearby0.4 miles outsideState highway office
US 281 BusinessHighway nearby0.7 miles outsideState highway office
Texas State Highway 285Highway nearby1.5 miles outsideState highway office
Una de Gato CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Palo Blanco CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Cantu Addition or within 1 mile outside it, so the mapped community has no track crossing to plan around. Una de Gato Creek lies 0.5 miles outside the boundary and Palo Blanco Creek is 1.0 mile away; no named stream crosses are mapped inside the community. There are no mapped lakes or ponds within 1 mile. If a proposed route reaches a creek, we plan the crossing separately and check for federal jurisdiction.

Who approves a Cantu Addition bore in Brooks County?

Cantu Addition is an unincorporated census designated place, so it has no city government; road authority depends on whether work is on a county road or state right of way. For a route reaching US 281, US 281 Business or Texas State Highway 285, the utility owner files the TxDOT permit in its online RULIS system, not the driller. We give the owner the bore plan and profile, and TxDOT’s Pharr District reviews it. At a highway crossing, cover is generally 60 inches for electric and communication lines and water, and 60 inches for pressurized sewer. A creek route near Una de Gato Creek also gets checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines serving Cantu Addition in Brooks County?

The provider serving a specific Cantu Addition address must be confirmed with the county, city or local water district before planning a bore. EPA drinking water records do not tie a system to this place, and no provider can be matched to a particular address from those records. AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric Cooperative report electric service in Brooks County. Before an electric conduit bore along Meztizo Road, we confirm the line owner and expose marked utilities with hydrovac potholing.

Line ownerWhat it isSourceSize
AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric CooperativeElectric utilities reporting service in Brooks CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing data is not reliable for a place as small as Cantu Addition, so we cannot use a local age profile to tell whether work is replacement or a new service. Long service runs and lines along Meztizo Road or Sunrise Road can still shape the route. September averages 4.6 inches of rain, the wettest month, while February averages 1.0 inches; wet ground can affect pits. We pothole marked lines before drilling near them, including water and electric routes.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Cantu Addition and nearby Airport Road Addition?

Cantu Addition is an unincorporated community in Brooks County, at an elevation of 109 feet and covering 0.3 square miles. Its ZIP code is 78355. Falfurrias is 1.7 miles northeast, and Airport Road Addition is 3.7 miles east; Flowella is 5.7 miles east. Premont is 11.0 miles north and Concepcion is 18.1 miles northwest. Falfurrias is the county seat, while Kingsville is the nearest larger city, 27.9 miles northeast. Our Yukon, Oklahoma main office is 630 road miles away, a 12.3 hour drive, so mobilization is part of planning a Cantu Addition project.

Places near Cantu Addition

What kinds of bores come up near Sunrise Road in Cantu Addition?

  • Water service: A service route along Sunrise Road can connect a property while keeping the street surface intact.
  • Electric conduit: Along Meztizo Road, we confirm the line owner and expose marked utilities before drilling close to the proposed conduit path.
  • Fiber line: A fiber bore toward Falfurrias can use a narrow route that avoids opening the road surface.
  • Highway crossing: A proposed line approaching US 281 needs a route plan that accounts for TxDOT right of way and required cover.
  • Creek crossing: Work near Una de Gato Creek needs a crossing plan and a jurisdiction check before the bore is set.
  • Sewer line: Sandy surface soils and sandy clay loam below can affect reaming and fluid control on a sewer route in Cantu Addition.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Cantu Addition quote near US 281?

For a Cantu Addition quote, send the address or map pin, what will go underground, pipe or conduit size and footage; a sketch or plans help. If the route approaches US 281 or Meztizo Road, mark the crossing and any pavement so we can judge the access and bore path.

A short service on Sunrise Road with clear access is simpler to plan than a route near US 281 or a creek. Length, pipe size, Palobia and Nueces ground, and the number of utilities to expose all affect the work. Pavement, pits, sand backfill and excavator time can add scope. Creek conditions near Una de Gato Creek need review, and the 630 road miles from Yukon affect mobilization. High profile or emergency work also changes the plan.

Questions people ask about boring in Cantu Addition

Does Trinity take directional boring work in Cantu Addition, Brooks County?

Yes. We take directional boring work in Cantu Addition, and our own crews or satellite yards run by vetted drilling partners can staff a job. From the first call through the bore log, we coordinate work near Una de Gato Creek regardless of which crew is on site. A route along Meztizo Road can be scoped for water, sewer, gas, electric conduit or fiber.

Could groundwater or flooding near Una de Gato Creek affect a Cantu Addition bore pit?

It can affect pit planning. Seasonal water table conditions are mapped within 60 inches across 74 percent of Cantu Addition, so a pit may need pumping. Una de Gato Creek is 0.5 miles outside the mapped community boundary, and flood prone soils are not mapped. A route that reaches the creek still needs a separate crossing review.

Does Palobia soil in Cantu Addition corrode steel, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 74 percent of Cantu Addition. The line owner should weigh that condition when choosing steel casing or tracer wire protection. When we plan bores through Palobia and Nueces soils, HDPE is not affected by soil corrosion. Palobia loamy fine sand covers most of the mapped area, but the soil survey is not a site specific test.

What ground will a Cantu Addition bore pass through in Palobia soil?

The USDA soil survey maps Palobia loamy fine sand across 74 percent of Cantu Addition and Nueces fine sand across 26 percent. At about 40 inches below ground, sandy clay loam is mapped throughout the area. That change from sandy surface material to finer soil can affect fluid control, hole stability and the reaming sequence.

Will a Cantu Addition bore hit rock below Meztizo Road?

Bedrock is not mapped in the top five feet of Cantu Addition, but that does not rule out deeper rock along Meztizo Road. The geologic map identifies Holocene sand sheet in part of the area, rather than a bedrock unit. We use site conditions and the planned bore depth to determine equipment and approach.

Who approves a Cantu Addition bore under US 281?

For work in US 281 right of way, the utility owner submits the TxDOT permit through RULIS; the contractor does not file it. Trinity supplies the bore plan and profile, and TxDOT’s Pharr District reviews the application. US 281 is 0.4 miles outside the mapped Cantu Addition boundary, so the route determines whether that permit applies.

How far is Cantu Addition from the Yukon office, and does Kingsville change the job?

Cantu Addition is 630 road miles and a 12.3 hour drive from our Yukon, Oklahoma main office. Kingsville is 27.9 miles northeast of the community, but it does not change the route or ground conditions at the jobsite. The Yukon distance can affect mobilization, especially for a small service along Sunrise Road.

How much notice does Texas811 need for a Cantu Addition bore along Meztizo Road?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Meztizo Road start slips more than 14 days past the original notice, a new request is needed. Before we continue a crossing on Meztizo Road, we refresh any marks that are worn or moved.

What affects the cost of directional boring in Cantu Addition near US 281?

The price depends on the route and scope, not a fixed local rate. Length, line size, Palobia and Nueces ground, exposed utilities, pavement, pits and creek work all affect the plan. A crossing near US 281 can involve state right of way requirements, while the 630 road miles from Yukon affect mobilization.

Where the Cantu Addition facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cantu Addition

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cantu Addition, Texas

Type the address of your job in Cantu Addition. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cantu Addition

Same county: Encino. All counties: Texas county list.