Gatesville Texas Directional Boring: Minwells Soil, Leon River and US 84
Quick Answer: The USDA soil survey maps Minwells fine sandy loam near the surface, with sandy clay common at about 40 inches. It also maps bedrock within 60 inches across parts of Gatesville. We take directional boring, also called horizontal directional drilling (HDD), work beneath the Leon River and local roads. Gatesville is 339 road miles from our Yukon, Oklahoma office, a distance that affects mobilization for a Main Street bore. The mapped clay can hold a hole open but may stick to the reamer and grip pipe.
Gatesville bores at a glance
- County seat of Coryell County, Texas. Population 16,388 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 339 miles, about 6.6 hours of driving.
- Ground: Minwells soil is mapped on 26 percent of the area, with sandy clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 36 percent of the area.
- Highways inside the boundary: US 84, Texas State Highway 36, Texas State Highway 36 Business, FM 929 and FM 116. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Leon River, Stillhouse Branch, Dodd Branch and Leon R.
- Public water: City of Gatesville, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring on Main Street in Gatesville?
We take directional boring work in Gatesville, the Coryell County seat, where the Census Bureau Vintage 2024 estimate puts the population at 16,388. Along Main Street, State School Road or Leon Street, we can install water, sewer, gas, electric conduit and fiber lines by bore, with the route and pipe size guiding the setup. The local street and utility layout shape the plan before drilling starts.
Our main office is in Yukon, Oklahoma, and Gatesville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; Gatesville is 339 road miles from Yukon’s main office, which affects scheduling. For Gatesville work, our range from 3/4 inch service lines to 48 inch casing can fit a small service run or a larger crossing near US 84.

What is Minwells soil like to bore in Gatesville?
The USDA soil survey maps Minwells fine sandy loam across 26 percent of Gatesville, the largest named soil series share. Topsey accounts for 20 percent, Nuff for 13 percent and Slidell for 12 percent. At about 40 inches, sandy clay is mapped under 26 percent of the city, while silty clay loam is mapped under 20 percent. The survey also reports an average clay content of 39 percent at that depth. These are mapped soil patterns, not test borings, so a specific route still needs a field plan.
| USDA soil survey, inside the Gatesville city limits | What is mapped |
|---|---|
| Soil series mapped | Minwells 26 percent, Topsey 20 percent, Nuff 13 percent, Slidell 12 percent and Bosque 8 percent |
| Texture at the surface | clay loam 35 percent, fine sandy loam 28 percent and very stony silty clay loam 13 percent |
| Texture about 40 inches down | sandy clay 26 percent, silty clay loam 20 percent and bedrock 17 percent |
| Engineering class about 40 inches down | clayey sand (SC) 26 percent, silt (ML) 20 percent and elastic silt (MH) 13 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | 36 percent of the area (7 percent hard rock, 29 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 8 percent of the area |
| High corrosion risk for uncoated steel | 32 percent of the area |
Bedrock is mapped within 60 inches under 36 percent of Gatesville, including weathered bedrock under 29 percent and hard bedrock under 7 percent. The survey maps no seasonal water table within 60 inches, but flood prone soils cover 8 percent, so the Leon River route needs its own depth plan. High steel corrosion risk is mapped under 32 percent. The geologic map includes Cenozoic terrace deposits and Early Cretaceous sedimentary rock. Weathered rock may slow a bore; a hard rock zone can call for rock tooling.
How do crews handle sandy clay in Gatesville?
Gatesville has clay at depth and bedrock mapped within 60 inches in parts of the city. We match fluid, reaming and tooling to the route, then keep the drill head on a logged path near streets such as Leon Street.
- For the sandy clay mapped at about 40 inches, we use fluid suited to sticky ground, ream in stages and have the pipe ready before opening the final hole.
- Heavy clay is mapped under much of Gatesville at depth, so we watch fluid returns near Main Street to keep pressure from lifting pavement.
- Where bedrock occurs within 60 inches, we match the bit to the material and slow the pass if the drill moves from soil into rock.
- We hydrovac pothole each marked utility along a Gatesville bore path before drilling near it, then track depth and pitch as the head advances.

Where does a line have to go under the Leon River in Gatesville?
US 84 has 5.2 mapped roadway miles inside Gatesville, while Texas State Highway 36 has 13.4. FM 929, FM 116 and FM 215 are also within the city limits. A route along or across those highways needs its own alignment and cover plan. Main Street is the longest named street at 6.94 miles, followed by State School Road at 2.94 miles and Leon Street at 2.56 miles. Those street lengths make clear why the actual crossing point matters more than the road name alone.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 84 | US highway | 5.2 roadway miles inside | State highway office |
| Texas State Highway 36 | State highway | 13.4 roadway miles inside | State highway office |
| Texas State Highway 36 Business | State highway | 6.5 roadway miles inside | State highway office |
| FM 929 | State highway | 2.8 roadway miles inside | State highway office |
| FM 116 | State highway | 1.1 roadway miles inside | State highway office |
| FM 215 | State highway | 0.6 roadway miles inside | State highway office |
| FM 107 | State highway | 0.5 roadway miles inside | State highway office |
| FM 2412 | State highway | 0.2 roadway miles inside | State highway office |
| Leon River | Stream | 4.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Stillhouse Branch | Stream | 1.45 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dodd Branch | Stream | 0.96 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Leon R | Stream | 0.63 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rock Creek | Stream | 0.49 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Fourmile Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Gatesville or within 1 mile outside its limits, so the mapped street and rail crossing count is none. The Leon River runs 4.31 channel miles in the city, and nine street crossings of named streams are mapped. Stillhouse Branch and Dodd Branch also cross the city. A creek or river bore is planned around its channel, and the Leon River crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. No lakes or ponds are mapped within 1 mile, so we still check drainage near Leon River when planning a bore route.
Do I need a permit to bore in Gatesville or Coryell County?
Gatesville is incorporated, so its city streets belong to the city itself; for a route on Main Street or Leon Street, the city is the street authority. Work in the right of way of US 84, Texas State Highway 36 or a farm to market road needs a TxDOT utility permit reviewed by the Waco District. The line owner, not our drilling crew, files through RULIS. We give the owner the bore plan and profile and work under its permit. A highway crossing needs the required cover, and the district can set a different depth. The Leon River route is checked for federal water crossing jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Gatesville near the City of Gatesville?
The City of Gatesville public water system serves 16,135 people through 4,379 service connections and uses surface water. A water bore that follows Main Street or reaches a nearby service has to be planned around the existing system. Utilities reporting electric service in Coryell County include Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service. Before planning an electric conduit bore near US 84, we confirm the line owner and coordinate permit questions with the TxDOT Waco District permit office.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Gatesville | Public water system | Surface water | 4,379 connections, 16,135 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Coryell County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Gatesville’s median housing year at 1979; 25 percent of homes were built before 1960 and 21 percent in 2000 or later. That mix can mean a replacement route along State School Road has older buried lines to account for, while newer services need a clean path to the connection. We hydrovac pothole every marked utility on a bore path before drilling near it. On Leon Street, that means exposing the marked lines first because paint shows position, not depth.

What is near Gatesville and South Mountain?
Gatesville is the Coryell County seat, covers 10.66 square miles and sits at an elevation of 816 feet. Gatesville uses ZIP codes 76528, 76597 and 76599, so we use the service address to identify the underground work location in Coryell County. South Mountain is 3.9 miles east, Mound is 8.6 miles southeast and Oglesby is 13.9 miles east. Copperas Cove, the nearest larger city, is 24.2 miles southwest. US 84 and Texas State Highway 36 are local route references for planning access. Our Yukon yard is 339 road miles away, a drive of 6.6 hours, so distance is part of arranging a Gatesville mobilization.
Places near Gatesville
- Directional boring in South Mountain: 3.9 miles east
- Directional boring in Mound: 8.6 miles southeast
- Directional boring in Flat: 11.5 miles southeast
- Directional boring in Oglesby: 13.9 miles east
- Directional boring in Mosheim: 15.9 miles northeast
- Directional boring in Copperas Cove: 24.2 miles southwest
What would we bore near Leon Street in Gatesville?
- Highway crossing: A bore under US 84 keeps the line beneath the paved travel lanes and follows the cover plan in the TxDOT permit.
- Water service: A new connection near Main Street can be bored toward the City of Gatesville system without opening the full street.
- Fiber route: A conduit run along Leon Street can use a bore path that avoids cutting the pavement between access pits.
- Creek crossing: A Leon River bore needs a planned path below the channel and a check for federal water crossing jurisdiction.
- Street replacement: A water or sewer replacement near State School Road starts with exposing marked utilities before the drill approaches them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Gatesville bore near US 84?
For a Gatesville quote near Main Street, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help. A route near US 84 needs its crossing point and right of way shown clearly. That lets us judge the bore path, access and likely utility conflicts before setting the work scope.
In Gatesville, we account for Minwells and Topsey soil series when planning, but the job details set our price. Gatesville is 339 road miles from Yukon, so mobilization matters alongside bore length, pipe size and the soil or rock on the route. Sandy clay and bedrock mapped within 60 inches can change tooling and reaming time. A crossing beneath US 84 brings pavement, cover and casing details into the plan; a Leon River route adds creek crossing work. Exposed utilities, pits, excavator time, sand backfill and emergency timing can also change the scope.
Questions people ask about boring in Gatesville
Does Trinity Boring Solutions take directional boring work in Gatesville and Coryell County?
Yes. We take work in Gatesville and serve Texas with our own crews and partner contractor yards that Trinity has vetted. Our Yukon office remains the main contact from the first call through the bore log, regardless of which crew is on site. For a route near US 84, we plan around the specific crossing and ground.
Who is responsible for Leon Street in Gatesville, and can a bore avoid cutting it?
Gatesville is incorporated, so its city streets, including Leon Street, belong to the city itself. Directional boring can put a line beneath pavement rather than opening a trench across the street. The bore still needs an approved route and known utility locations, so marked lines are exposed before drilling near them.
How do older homes and buried lines affect a replacement bore near State School Road in Gatesville?
The American Community Survey 2019 to 2023 five year estimates report a median housing year of 1979, with 25 percent of homes built before 1960. That age mix can mean a replacement near State School Road must account for existing services and unknown line depths. We expose marked utilities along the bore path before the drill gets near them.
Does Minwells soil in Gatesville corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk under 32 percent of Gatesville, but that citywide figure does not identify a particular address. The line owner selects any coating needed for steel casing or tracer wire. When discussing a bore near Dodd Branch, we explain that HDPE does not share steel’s corrosion concern. A route through Minwells soil still needs site specific planning.
What ground should I expect in Gatesville near Minwells soil?
The USDA soil survey maps Minwells fine sandy loam under 26 percent of Gatesville. At about 40 inches, sandy clay is mapped under 26 percent and silty clay loam under 20 percent. Those mapped layers can mean sticky cuttings and a hole that needs staged reaming. They describe survey patterns, not the exact ground at a particular bore.
Is there rock near the surface in Gatesville, and is it hard or weathered?
Bedrock is mapped within 60 inches across 36 percent of Gatesville. Weathered bedrock accounts for 29 percent and hard bedrock for 7 percent of the mapped area. A bore through weathered material may advance more slowly than dirt, while hard rock can require rock tooling. The soil survey does not determine what a particular Leon Street route will encounter.
How much 811 notice does a bore along Main Street in Gatesville need?
Texas811 needs a locate request at least 48 hours before excavation starts, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Main Street start slips more than 14 days past the original notice, make a new request. If marks shift along State School Road, we pause and have them refreshed through Texas811 before work continues.
How far is Gatesville from Yukon compared with Copperas Cove, and does distance affect a bore?
Gatesville is 339 road miles and 6.6 drive hours from our Yukon, Oklahoma main office. Copperas Cove is 24.2 miles southwest of Gatesville. The Yukon distance can affect mobilization planning, while a route near Copperas Cove may have different access and ground details. We use the actual address and scope to plan the trip.
What affects the cost of directional boring in Gatesville near US 84, including crossing length and conditions near Leon River?
The price depends on the job scope, not just the footage. For a US 84 crossing, pavement, permit cover and casing details can affect the work. Length, pipe size, sandy clay, bedrock, exposed utilities, creek crossings, pits and excavator time also matter. Gatesville’s 339 road miles from Yukon affect mobilization, and emergency timing can change the plan.
Where the Gatesville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Gatesville
- U.S. Census Bureau, TIGER/Line 2024: Gatesville boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Gatesville
- U.S. Census Bureau, American Community Survey 2019 to 2023: Gatesville housing units and year built
- Macrostrat geologic map compilation: map units under Gatesville
- U.S. EPA Safe Drinking Water Information System: public water systems serving Gatesville
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Coryell County
- U.S. Geological Survey, Elevation Point Query Service: Gatesville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Gatesville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Gatesville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Gatesville, Texas
Type the address of your job in Gatesville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Gatesville
Same county: Fort Hood · Evant. All counties: Texas county list.
