trinityboringsolutions.com

Oglesby Texas Directional Boring: Purves Soil, FM 1996 and Station Creek

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Oglesby for lines beneath FM 1996 and local streets. Oglesby is 327 road miles from our Yukon, Oklahoma main office, so work is staffed by our crews and vetted drilling partners. Purves soil covers 56% of the mapped area and can hold a bore open while its clay builds up on the reamer. We plan each route around the street, the line being installed and the ground along the path.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Oglesby bores at a glance

  • Incorporated city in Coryell County, Texas. Population 445 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 327 miles, about 6.4 hours of driving.
  • Ground: Purves soil is mapped on 56 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 97 percent of the area.
  • Highways inside the boundary: FM 1996. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Oglesby, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Oglesby and Coryell County?

Oglesby is 327 road miles from our Yukon, Oklahoma main office, and we staff the work with our own crews and vetted partner drilling contractors. The Census Bureau Vintage 2024 estimate puts the Oglesby population at 445. Along Baird Street or College Avenue, we install water, sewer, gas, electric conduit and fiber through planned bores that avoid open cuts where the route allows.

Our main office is in Yukon, Oklahoma, and Oglesby work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been directional boring since 1982, so four decades of work guide how we approach Oglesby’s mapped Purves soil and limestone. Our family business started in 1965, and you work with Trinity from the first call through the bore log, whichever crew is on site.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Oglesby soil like to bore through Purves?

The USDA soil survey maps Purves soil across 56% of Oglesby, with Crawford soil at 18%, Denton soil at 12% and Bolar soil at 11%. The surface is gravelly silty clay in 56% of the mapped area and silty clay in 33%. About 40 inches down, the survey maps bedrock across 85% of the area and silt loam across 12%; the average clay content at that depth is 30%. These are mapped conditions, not test borings. The clay can stick to a reamer and grip pipe, so we plan staged reaming and a timely pull.

USDA soil survey, inside the Oglesby city limitsWhat is mapped
Soil series mappedPurves 56 percent, Crawford 18 percent, Denton 12 percent, Bolar 11 percent and Slidell 3 percent
Texture at the surfacegravelly silty clay 56 percent, silty clay 33 percent and gravelly clay loam 11 percent
Texture about 40 inches downbedrock 85 percent, silt loam 12 percent and silty clay 3 percent
Engineering class about 40 inches downlean clay (CL) 12 percent and fat clay (CH) 3 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches97 percent of the area (97 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel77 percent of the area

The USDA soil survey maps hard bedrock within five feet across 97% of Oglesby, with typical bedrock depth at 24 inches. That makes the soil to rock change a key steering concern. Seasonal water table and flood prone soils are not mapped in the area, so those conditions do not shape the plan the way they might along a creek. High steel corrosion risk is mapped across 77%, a consideration for steel casing and tracer wire; the line owner selects any needed coating. The Cenozoic Stony Calcareous Clay Solution Residuum includes clay and limestone, with fractured limestone bedrock beneath some mapped ground.

What does it take to bore Oglesby bedrock?

Purves soil and shallow mapped bedrock call for a bore plan that can handle sticky clay and a change to limestone. We check the route, expose marked lines and track the drill head as the bore advances.

  1. On a Purves soil route, we use thinner drilling fluid and staged reaming to manage clay buildup, then plan to pull the pipe while the hole is open.
  2. With hard bedrock mapped within five feet across 97% of Oglesby, we allow for slower rock drilling and watch the head as soil changes to limestone.
  3. Before drilling near a marked utility on Baird Street, we hydrovac pothole it to confirm its depth because surface marks show position only.
  4. We track the drill head from the surface and log depth and pitch along routes such as FM 1996, adjusting the plan as ground conditions change.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What does a bore have to cross in Oglesby near Station Creek?

FM 1996 runs 0.8 mapped roadway miles inside Oglesby, and US 84 is 0.8 miles outside the city limits. College Avenue is the longest named street at 0.63 miles, followed by Boone Avenue at 0.64 miles and Baird Street at 0.41 miles. A route under FM 1996 needs a plan for its right of way and pavement. On College Avenue or Boone Avenue, the bore path also has to account for marked utilities and available space for entry and exit pits.

CrossingTypeMapped extentWho has a say
FM 1996State highway0.8 roadway miles insideState highway office
US 84Highway nearby0.8 miles outsideState highway office
Station CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Oglesby or within one mile of its limits, so there is no local track crossing shown in the records. Station Creek runs along or touches the city boundary, but no mapped street crossing of a named stream is inside the city. In Oglesby, no lakes or ponds are mapped within one mile, so we check nearby drainage such as Station Creek when reviewing a bore route. If a proposed route reaches Station Creek, we check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Do I need a permit to bore under Oglesby FM 1996?

The cover depth sets how low a bore must run under FM 1996: electric and communications lines need 60 inches at a highway crossing, water lines need 60 inches, and pressurized sewer lines need 60 inches. Along the right of way, electric and communications need 48 inches of cover and water needs 36 inches. The TxDOT Waco District reviews utility permits for work in the state highway right of way. The utility that owns the line submits the application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that utility’s permit. Oglesby’s city streets, such as Baird Street, belong to the city. No railroad is mapped nearby, and a Station Creek route is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are already in the ground in Oglesby near City of Oglesby?

The City of Oglesby public water system uses groundwater wells and serves 454 people through 276 service connections. For a conduit bore near the city water lines, we identify the electric line owner before setting the route. Utilities reporting electric service in Coryell County include Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service. Those reports do not establish which provider serves a particular address on College Avenue.

Line ownerWhat it isSourceSize
City of OglesbyPublic water systemGroundwater wells276 connections, 454 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Coryell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Oglesby’s median housing year is 1959 in the American Community Survey 2019 to 2023 five year estimates; we keep neighborhood context in view when planning underground routes. They estimate 53% of housing was built before 1960, 36% from 1960 to 1999 and 11% in 2000 or later. A replacement service near Mooney Avenue may meet older buried lines, while a new connection has its own route to plan. We hydrovac pothole every marked utility on the bore path before drilling near it; for example, a line under College Avenue must be exposed because paint shows its position, not its depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Oglesby from Crawford and our Yukon yard?

Oglesby is in Coryell County, 13.9 miles east of county seat Gatesville. It covers 0.51 square miles at an elevation of 854 feet, and its ZIP code is 76561. McGregor is 5.0 miles east and is the nearest larger city; Crawford is 9.1 miles northeast. Mound lies 9.1 miles southwest. From our Yukon, Oklahoma yard, the road distance is 327 miles and the drive is 6.4 hours. That distance is part of planning a job near FM 1996, including how equipment and crews reach the site.

Places near Oglesby

What would we bore near Oglesby College Avenue?

  • Road crossing: A bore beneath FM 1996 needs a route and cover plan that fits the state highway right of way.
  • Water service: A connection near the City of Oglesby system can use a bore to reach a building without opening the full route along College Avenue.
  • Fiber drop: A conduit route along Boone Avenue can pass beneath the street and avoid cutting pavement where the alignment permits.
  • Creek crossing: A proposed route near Station Creek needs a site specific path and a check for federal jurisdiction during planning.
  • Street replacement: A new water or sewer line near Baird Street can be bored around existing lines after marked utilities are exposed.
  • Residential service: A short service near Mooney Avenue can be sized for the pipe, footage and access available at the property.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Oglesby Mooney Avenue?

For a quote, send the Oglesby address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. The route near Mooney Avenue can change the answer if it meets older utilities or pavement. A route near Station Creek also needs its own crossing review, so the exact path matters.

For Oglesby work near FM 1996, we set pricing from the job scope and the route conditions we need to address. Ground conditions such as Purves clay and shallow bedrock affect tooling and reaming time. Crossings matter too: work beneath FM 1996, pavement, or a marked utility can call for different planning and exposure work. Logistics include pits, excavator time, sand backfill and how far the crew must mobilize from Yukon, 327 road miles away. Bore length, pipe size, creek access and emergency timing also shape the work.

Questions people ask about boring in Oglesby

Does Trinity take directional boring jobs in Oglesby and Coryell County?

Yes. We take directional boring work in Oglesby, and the job is handled by our crews or a drilling contractor partner we have vetted. We guide your project from first call through the bore log, with planning for Boone Avenue or other Oglesby streets handled consistently. For a route near FM 1996, we plan around the highway and the lines marked along the path.

Who controls Baird Street in Oglesby, and can a bore avoid cutting it?

Baird Street is a city street because Oglesby is incorporated. A directional bore can pass beneath a street without opening a trench across its surface when the route and ground allow. We still need the planned alignment and marked utilities along Baird Street to set entry and exit pits and choose a workable path.

What do older homes near College Avenue mean for Oglesby replacement bores?

The American Community Survey 2019 to 2023 five year estimates put Oglesby’s median housing year at 1959, with 53% of units built before 1960. An older service near College Avenue may be replaced along a route with existing buried lines, so we expose marked utilities before drilling close to them. The bore can avoid opening the full street route.

Does Purves soil in Oglesby corrode steel, and what pipe can go in a bore?

The USDA soil survey maps high steel corrosion risk across 77% of Oglesby. The line owner decides whether steel casing or tracer wire needs a coating. For underground planning in Oglesby, we consider the Purves soil series; HDPE is not affected by that soil corrosion concern. Near Purves soil, sticky clay and shallow mapped bedrock also matter to the bore plan, apart from the material chosen for the installed line.

What ground does a bore pass through in Oglesby Purves soil?

The USDA soil survey maps Purves soil across 56% of Oglesby, mostly gravelly silty clay at the surface. At about 40 inches down, bedrock is mapped across 85% of the area and silt loam across 12%; average clay content there is 30%. Clay can cling to the reamer, while the bedrock transition can affect steering.

How much of Oglesby has bedrock mapped within five feet, and is it hard?

The USDA soil survey maps bedrock within five feet across 97% of Oglesby, and it is mapped as hard bedrock rather than weathered bedrock. Typical depth is 24 inches. That can mean slower drilling and a change in steering when the head moves from Purves soil into limestone. The survey describes mapped patterns, not conditions confirmed by a test bore.

What bore sizes and lengths can Trinity handle near Mooney Avenue in Oglesby?

We handle lines from 3/4 inch service lines up to 48 inch casing, and bore lengths from 10 feet to 5,000 feet. For a route near Mooney Avenue, the actual size and footage depend on what the line must serve and the ground along the path. The mapped shallow bedrock in Oglesby is one factor in planning the bore.

How early should I request an Oglesby bore locate near Boone Avenue?

Texas law requires the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a planned start near Boone Avenue, count back two working days. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near FM 1996 in Oglesby, including route planning and coordination with the TxDOT Waco District?

We price Oglesby work by the full job scope, including route planning in Coryell County, rather than letting any single factor decide. Near FM 1996, highway requirements and pavement can affect the plan. Purves clay and shallow bedrock can change drilling time, while marked utility crossings may require hydrovac exposure. Bore length, pipe size, pits, equipment time and the 327 road miles from Yukon also affect mobilization and job planning.

Where the Oglesby facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Oglesby

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Oglesby, Texas

Type the address of your job in Oglesby. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Oglesby

Same county: Copperas Cove · Fort Hood · Gatesville · Evant. All counties: Texas county list.