Cinco Ranch Texas Directional Boring: Katy Soil, Texas State Highway 99, Buffalo Bayou
Quick Answer: Can you get a line under Texas State Highway 99 without cutting it? Yes, we do directional boring, also called horizontal directional drilling (HDD), in Cinco Ranch for road crossings. The Yukon, Oklahoma main office is 466 road miles away, and Buffalo Bayou is one local crossing to plan around. USDA maps show Katy soil across 47 percent of the area. Clay loam about 40 inches down can cling to a reamer, so staged passes and careful fluid control matter.
Cinco Ranch bores at a glance
- Unincorporated community in Fort Bend County and Harris County, Texas. Population 16,899 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 466 miles, about 9.1 hours of driving.
- Ground: Katy soil is mapped on 47 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 99. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Buffalo Bayou.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Peek Road in Cinco Ranch?
Can you get a line under Peek Road without cutting it? Yes, we can install a bore for a water, sewer, gas, electric conduit or fiber line. Cinco Ranch is an unincorporated community in Fort Bend County and Harris County, with a 2020 Census population of 16,899. Lines can run beneath Peek Road or other local streets to connect properties while leaving the paved surface intact.
Our main office is in Yukon, Oklahoma, and Cinco Ranch work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a service line beneath Peek Road, our size range runs from 3/4 inch service lines to 48 inch casing. We are a family business started in 1965, with directional boring work dating to 1982.

What kind of ground does Katy soil mean for a bore in Cinco Ranch?
The USDA soil survey maps Katy soil across 47 percent of Cinco Ranch, with Clodine at 25 percent, Cyfair at 20 percent and Snakecreek at 7 percent. Surface texture is fine sandy loam across 94 percent of the mapped area, but about 40 inches down, clay loam accounts for 60 percent and loam for 25 percent. Katy, Clodine, Cyfair, and Snakecreek soil series give us mapped patterns, not test borings, when planning Cinco Ranch bore depths. Clay loam can stick to the reamer and grip pipe, so a bore route near Peek Road needs a plan for staged reaming and timely pipe pullback.
| USDA soil survey, inside the Cinco Ranch mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Katy 47 percent, Clodine 25 percent, Cyfair 20 percent and Snakecreek 7 percent |
| Texture at the surface | fine sandy loam 94 percent and very fine sandy loam 5 percent |
| Texture about 40 inches down | clay loam 60 percent, loam 25 percent and sandy clay loam 14 percent |
| Engineering class about 40 inches down | lean clay (CL) 92 percent and clayey sand (SC) 7 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 52 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 52 percent of the area |
The USDA soil survey maps a seasonal water table within 60 inches across 52 percent of Cinco Ranch, so pits near Buffalo Bayou may need pumping and compact dimensions. Flood prone soils cover 7 percent of the mapped area, making channel depth part of creek crossing planning. High steel corrosion risk is mapped across 52 percent; the line owner should consider steel casing and tracer wire materials, while HDPE avoids that soil concern. Along Peek Road, we treat the lack of mapped bedrock in the top five feet as a map limit, not subsurface clearance. The geologic map shows the Lissie Formation of Pleistocene age and alluvial sand, silt, and clay, so deeper conditions still need site specific planning.
What does it take to bore Cinco Ranch clay loam?
Katy soil and clay loam about 40 inches down call for a controlled bore, not a rushed pull. Along Peek Road, we plan the route, fluid and pits around mapped soil and nearby utilities.
- With clay loam mapped at about 40 inches in Cinco Ranch, we can ream in stages and use a thinner fluid blend to limit sticky buildup.
- Near Peek Road, every marked utility on the bore path is hydrovac pothole exposed before the drill approaches; surface paint does not show burial depth.
- Where the seasonal water table is mapped within 60 inches, as it is across 52 percent of Cinco Ranch, we plan small pits and pumping.
- At Buffalo Bayou, the bore profile must account for the channel and flood prone soils, with Corps jurisdiction checked during crossing planning.

What is in the way of a new line in Cinco Ranch near Texas State Highway 99?
Texas State Highway 99 runs 1.5 roadway miles inside the mapped Cinco Ranch community boundary, so a route there needs highway right of way planning. Peek Road is the longest named street at 4.66 miles, followed by Cinco Ranch Boulevard at 4.28 miles and Westheimer Parkway at 4.19 miles. Fry Road and Mason Road are also named local routes. A bore can pass beneath pavement without an open cut, but the exact route and access for pits depend on the property and crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 99 | State highway | 1.5 roadway miles inside | State highway office |
| Buffalo Bayou | Stream | 2.93 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Prong | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the Cinco Ranch boundary or within one mile outside it, so there is no mapped track route to plan around. Buffalo Bayou runs 2.93 channel miles through the community, and mapped streets cross named streams at six locations. Those crossings call for a route that stays below the channel and a check during planning for U.S. Army Corps of Engineers jurisdiction. In Cinco Ranch, no lakes or ponds are mapped within one mile; we still plan crossings around Buffalo Bayou.
Who approves a Cinco Ranch bore near Fort Bend County roads?
Cinco Ranch has no city government because it is an unincorporated community, so a street permit is handled by the county or state with authority over that road, not a city office. For work in the right of way of Texas State Highway 99, the line owner, not the driller, submits the utility permit through TxDOT’s RULIS system. We provide the owner with the bore plan and profile and work under its permit. TxDOT’s Houston District reviews the filing. At highway crossings, the cover rules call for 60 inches for electric, communication and water lines, and pressurized sewer lines; the permit may set another depth. A Buffalo Bayou crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Fort Bend County near Cinco Ranch?
The provider for a specific Cinco Ranch address has to be confirmed with the city, Fort Bend County or the local water district before a bore is planned; public records do not match a water system to this community. CenterPoint Energy reports electric service in Fort Bend County, but that does not establish the provider at every Peek Road address. We confirm the line owner for the route before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy | Electric utilities reporting service in Fort Bend County and Harris County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Cinco Ranch’s median housing year at 1997; we assess underground conditions separately. It estimates 2 percent of homes were built before 1960, 66 percent from 1960 to 1999 and 32 percent in 2000 or later. That mix can mean both replacement work and new service routes along streets such as Peek Road. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

Where is Cinco Ranch in relation to Mission Bend?
Cinco Ranch covers 4.51 square miles across Fort Bend and Harris counties, at an elevation of 112 feet. With ZIP codes 77450 and 77494 covering Cinco Ranch, we confirm the specific bore location before planning underground work. Katy is 6.0 miles northwest, and Mission Bend is 6.5 miles southeast; Richmond, the Fort Bend County seat, is 11.0 miles south. From the Yukon, Oklahoma main office, the road distance is 466 miles and the drive is 9.1 hours. That distance is part of planning crew and equipment mobilization for work near Buffalo Bayou.
Places near Cinco Ranch
- Directional boring in Katy: 6 miles northwest
- Directional boring in Mission Bend: 6.5 miles southeast
- Directional boring in Four Corners: 7.7 miles southeast
- Directional boring in Pecan Grove: 8.2 miles south
- Directional boring in Fulshear: 8.2 miles southwest
What boring work comes up near Buffalo Bayou in Cinco Ranch?
- Highway crossing: A line below Texas State Highway 99 needs a permitted route beneath the pavement rather than an open cut.
- Street service: A service beneath Peek Road can connect a property while leaving its pavement uncut.
- Creek crossing: Buffalo Bayou runs 2.93 channel miles in Cinco Ranch, so a bore needs a profile planned below the channel.
- Fiber conduit: A conduit route along Cinco Ranch Boulevard can be planned around existing marked utilities and nearby pavement.
- Water service: Before a water line near Westheimer Parkway is planned, confirm the provider for that specific address with the county or water district.
- Drainage crossing: The 8.02 miles of unnamed drainage in Cinco Ranch can affect pit placement and the route of a new bore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Cinco Ranch bore near Peek Road?
For a quote near Peek Road, send the address or map pin first, then say what will go underground. Include the pipe or conduit size and estimated footage; a sketch or plans help us trace the route. Those details show whether the job is a service line, a longer run or a crossing near Texas State Highway 99.
Cinco Ranch pricing starts with ground and crossing demands: Katy soil has clay loam at about 40 inches, while Texas State Highway 99 and Buffalo Bayou can add permit, depth and route planning. Length and pipe size matter, as do marked utilities to expose, pavement, pits, sand backfill and excavator time. A longer mobilization also matters because the Yukon office is 466 road miles away. In Fort Bend County, high profile or emergency work can change the scope, so we confirm crossing requirements before scheduling.
Questions people ask about boring in Cinco Ranch
Does Trinity Boring Solutions take directional boring work in Cinco Ranch and Fort Bend County?
Yes. We take directional boring work in Cinco Ranch, and staffing follows our service model: our own crews or crews from satellite yards run by drilling partners we have vetted. You work with Trinity from the first call through the bore log, even if a partner crew is on site near Peek Road.
Will groundwater or flood prone ground near Buffalo Bayou cause trouble for Cinco Ranch bore pits?
It can affect pit setup, but it does not automatically rule out a bore. The USDA soil survey maps a seasonal water table within 60 inches across 52 percent of Cinco Ranch and flood prone soils across 7 percent. Near Buffalo Bayou, we plan for water in pits and set the bore profile below the channel.
Does Katy soil in Cinco Ranch corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 52 percent of Cinco Ranch. The line owner should weigh that when selecting steel casing or tracer wire coatings; HDPE is not affected by the mapped soil corrosion concern. The right material depends on the line and the route, including work near Peek Road.
What ground will a bore go through in Cinco Ranch near Katy soil areas?
The USDA soil survey maps Katy soil across 47 percent of Cinco Ranch, with Clodine, Cyfair and Snakecreek also present. About 40 inches down, clay loam covers 60 percent of the mapped area, with loam at 25 percent and sandy clay loam at 14 percent. These are mapped patterns, not jobsite test borings.
Could we encounter deeper rock with a directional bore along Mason Road in Cinco Ranch, though bedrock is not mapped in the top five feet?
Near Katy, bedrock is not mapped in the top five feet of Cinco Ranch, but we account for possible deeper rock when planning bore depth. The geologic map shows the Lissie Formation, of Pleistocene age, and alluvial sand, silt, and clay. A bore near Buffalo Bayou still needs a route based on site conditions.
For a bore under Texas State Highway 99 in Cinco Ranch, is TxDOT Houston District the state permit office we should contact?
The line owner applies for the TxDOT utility permit in RULIS; the driller does not file it. TxDOT’s Houston District reviews the application. We prepare the bore plan and profile for the owner and work under its permit for a Texas State Highway 99 crossing in Cinco Ranch.
How far is Cinco Ranch from the Yukon office, and does Mission Bend affect the job?
The Yukon, Oklahoma main office is 466 road miles from Cinco Ranch, a 9.1 hour drive. Mission Bend is 6.5 miles southeast of the community, but it does not change the route requirements at a Cinco Ranch address. The Yukon distance can affect mobilization for a job near Peek Road.
How much notice does Texas811 need for a Cinco Ranch bore near Peek Road?
For a bore near Peek Road, request the Texas811 locate at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays. Do not request it more than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.
What affects the cost of directional boring in Cinco Ranch near Texas State Highway 99?
Ground conditions and crossings are major factors: Katy soil can affect reaming, and Texas State Highway 99 or Buffalo Bayou can add route and permit planning. Length, pipe size, utility exposures, pavement, pits and excavator time also matter. Mobilization from the Yukon office is part of a Cinco Ranch job because the road distance is 466 miles.
Where the Cinco Ranch facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Cinco Ranch
- U.S. Census Bureau, TIGER/Line 2024: Cinco Ranch boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Cinco Ranch population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Cinco Ranch housing units and year built
- Macrostrat geologic map compilation: map units under Cinco Ranch
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Fort Bend County and Harris County
- U.S. Geological Survey, Elevation Point Query Service: Cinco Ranch elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Cinco Ranch
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Cinco Ranch
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Cinco Ranch, Texas
Type the address of your job in Cinco Ranch. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Cinco Ranch
County: Harris County directional boring. Same county: Sugar Land · Missouri City · Houston · Rosenberg · Fresno · Stafford · Richmond · Pearland · Meadows Place · Weston Lakes · Needville · Fifth Street. All counties: Texas county list.
