Fifth Street Texas Directional Boring: Lake Charles Clay, American Canal, Union Pacific
Quick Answer: The water provider for a Fifth Street address needs confirmation with Fort Bend County or a local water district, and CenterPoint Energy reports electric service in the county, so identify the line owner before planning a bore. We do directional boring, also called horizontal directional drilling (HDD), for routes near Moore Road and American Canal. Fifth Street is 477 road miles from our Yukon, Oklahoma main office, and the nearby Union Pacific track may affect a route. Lake Charles clay is mapped across 64 percent of the community, so sticky cuttings and pressure need close attention.
Fifth Street bores at a glance
- Unincorporated community in Fort Bend County, Texas. Population 2,284 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 477 miles, about 9.3 hours of driving.
- Ground: Lake Charles soil is mapped on 64 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- No state or US highway is mapped inside the boundary. Closest: US 90 Alternate.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: American Canal and Stafford Run.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Fifth Street near Union Pacific?
For a Fifth Street address, confirm the water provider with Fort Bend County or a local water district before planning a bore; CenterPoint Energy reports electric service in the county, but the specific line owner matters. The Census Bureau counted 2,284 people here in 2020. We install water, sewer, gas, electric conduit and fiber, routing lines along streets such as Moore Road or toward American Canal as the plans require.
Our main office is in Yukon, Oklahoma, and Fifth Street work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from 3/4 inch service lines to 48 inch casing, fitting a short service route off Moore Road or a larger planned crossing. This family business began in 1965 and has done directional boring since 1982, with experience relevant to the varied routes around American Canal.

What is Lake Charles soil like to bore in Fifth Street?
The USDA soil survey maps Lake Charles clay, 0 to 1 percent slopes, across 64 percent of Fifth Street. Bernard Edna complex accounts for 27 percent, while Edna fine sandy loam and Edna loam make up the remaining mapped units. At about 40 inches below the surface, clay is mapped throughout the area, with average clay content of 54 percent. For Fifth Street, we treat mapped soil patterns as planning information, not test borings. For a bore, the heavy clay can cling to the reamer and grip pipe, so the drilling fluid and reaming sequence need to suit the route.
| USDA soil survey, inside the Fifth Street mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Lake Charles 64 percent, Bernard 27 percent and Edna 10 percent |
| Texture at the surface | clay 64 percent, clay loam 27 percent and fine sandy loam 5 percent |
| Texture about 40 inches down | clay 100 percent |
| Engineering class about 40 inches down | fat clay (CH) 100 percent |
| Average clay content about 40 inches down | 54 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 36 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The mapped top five feet around Fifth Street show no bedrock, but that does not rule out deeper rock. The geologic map identifies the Beaumont Formation, areas predominantly sand, from the Pleistocene; local ground can vary from the soil survey pattern. A seasonal water table is mapped in 36 percent of the area, which can fill entry and exit pits. On Fifth Street, flood prone soils are not mapped, so we do not treat mapping as confirmation of site conditions. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials; HDPE does not share that concern.
What does it take to bore through clay in Fifth Street?
Lake Charles clay covers much of Fifth Street, while the Beaumont Formation map includes sand. We adjust the fluid and reaming plan to the ground at the actual route, not just the mapped pattern.
- In Lake Charles clay, we use a thinner fluid with polymer and ream in stages so sticky cuttings do not build up on the tooling.
- Because heavy clay is mapped through the soil profile, we watch fluid returns closely near pavement to avoid pressure lifting the surface.
- Where the Beaumont Formation map shows sand, we use fluid to support the hole, ream in stages and have the pipe ready before the final pass.
- With seasonal water tables mapped in 36 percent of Fifth Street, we keep pits small and plan to manage water at the entry and exit.

What is in the way of a new line in Fifth Street near US 90 Alternate?
No highway is mapped inside the Fifth Street community boundary. US 90 Alternate is 0.5 miles outside it, so a route reaching the highway needs its own right of way review. Inside the community, the longest named streets include Moore Road at 0.88 miles, 5th Street at 0.84 miles and Packer Lane at 0.59 miles. A bore can pass beneath pavement without cutting it, but the entry and exit pits still need room on each side of the route.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 90 Alternate | Highway nearby | 0.5 miles outside | State highway office |
| Union Pacific | Railroad nearby | 0.6 miles outside | The railroad |
| American Canal | Stream | 1 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Stafford Run | Stream | 0.9 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Oyster Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| Frost Lake | Lake or pond | 53 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Fifth Street, and no street and rail crossing is mapped there. Union Pacific track is 0.6 miles outside the community boundary, so a proposed route toward it needs the railroad’s crossing agreement. American Canal runs for 1.0 channel miles inside the community, and Stafford Run for 0.9 miles; mapped streets cross named streams at four locations. Frost Lake, a 53 acre lake, is within one mile outside the boundary.
Who approves a Fifth Street bore in Fort Bend County?
Fifth Street is an unincorporated community, so it has no city government; work on its local streets is handled through the applicable county authority, while state highway right of way is handled by TxDOT. For a route involving US 90 Alternate, the line owner, not the driller, applies for the utility permit through TxDOT’s RULIS system, reviewed by the TxDOT Houston District. We prepare the bore plan and profile for the owner’s application. A Union Pacific crossing needs the railroad’s agreement, and a crossing at American Canal is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Fifth Street in Fort Bend County?
The water provider for a particular Fifth Street address has to be confirmed with Fort Bend County or the local water district before a bore is planned. CenterPoint Energy reports electric service in Fort Bend County, but that does not identify the electric line owner at every address. Confirm the owner and conduit requirements for the specific route before planning an electric bore near Moore Road or 5th Street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy | Electric utilities reporting service in Fort Bend County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Fifth Street’s median housing year at 1985; 66 percent of units date from 1960 to 1999 and 34 percent from 2000 or later. That mix can mean replacement work as well as new service routes. On a Moore Road alignment, we hydrovac pothole each marked utility on the bore path before drilling near it. Paint shows position, not depth.

Do you cover Fifth Street and nearby Missouri City?
Fifth Street is an unincorporated community in Fort Bend County, with 0.72 square miles of land and an elevation of 77 feet. ZIP code 77477 is associated with the community. Stafford is 2.1 miles northwest, Missouri City is 2.6 miles south, Meadows Place is 4.2 miles northwest, Sugar Land is 5.0 miles west and Fresno is 6.5 miles southeast. Richmond, the county seat, is 12.6 miles west. The Yukon yard is 477 road miles away, a 9.3 hour drive, which can affect mobilization for a Fifth Street job.
Places near Fifth Street
- Directional boring in Stafford: 2.1 miles northwest
- Directional boring in Missouri City: 2.6 miles south
- Directional boring in Meadows Place: 4.2 miles northwest
- Directional boring in Sugar Land: 5 miles west
- Directional boring in Fresno: 6.5 miles southeast
Which jobs call for a bore near American Canal in Fifth Street?
- Service line: A small water or sewer connection can run from a property toward Moore Road without opening the street surface.
- Highway crossing: A route near US 90 Alternate needs the line owner’s TxDOT permit and a bore plan suited to the highway right of way.
- Canal crossing: A proposed line beneath American Canal needs depth planning and a check for federal waterway jurisdiction.
- Rail crossing: A route approaching the Union Pacific track needs the railroad’s agreement before a line can pass beneath it.
- Fiber conduit: A conduit route along 5th Street can use a bore to avoid cutting pavement, with marked utilities exposed first.
- Drainage route: Near Stafford Run, a planned bore can pass below the channel while keeping pits on the banks.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Fifth Street job near Moore Road?
Send an address or map pin first. The exact point matters in Fifth Street because a route near Moore Road may face different pavement, utility and drainage conditions than one by American Canal. Include what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the entry, exit and any nearby crossing.
A clear route near Moore Road with room for pits is simpler to plan than one crowded by crossings. Length, pipe or conduit size, Lake Charles clay, exposed utilities, pavement, drainage crossings and pit or excavator needs all affect the work. A route toward US 90 Alternate or Union Pacific adds crossing coordination. Fifth Street’s 477 road miles from Yukon also affect mobilization, so the map pin helps us scope the whole job.
Questions people ask about boring in Fifth Street
Does Trinity Boring Solutions take Fifth Street jobs in Fort Bend County, and who staffs them?
Yes. We take directional boring work in Fifth Street, and our own crews or vetted partner contractor crews can handle the site. You work with Trinity through planning and the bore log whichever crew is there. The exact route, such as one near Moore Road, guides the crew and equipment plan.
Will a Fifth Street bore hit rock below Lake Charles soil?
The mapped top five feet in Fifth Street do not show bedrock, but deeper rock is not ruled out. The geologic map shows the Beaumont Formation, areas predominantly sand, from the Pleistocene. Lake Charles clay is common in the soil survey, so the route still needs field planning rather than assumptions from a map alone.
Who approves a Fifth Street bore under US 90 Alternate?
The utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Houston District reviews it. We prepare the bore plan and profile for that application and work under the owner’s permit. US 90 Alternate is 0.5 miles outside the mapped Fifth Street boundary, so the proposed right of way route matters.
For a Fifth Street bore under Union Pacific track, what do we need to plan for at the railroad crossing?
A crossing beneath the Union Pacific track needs an agreement from the railroad before work is planned. The track is 0.6 miles outside Fifth Street’s mapped boundary, and the railroad sets crossing conditions such as casing, depth and flagging. If the route also involves highway right of way, TxDOT asks for a copy of that agreement.
Can a Fifth Street line be bored under American Canal?
A bore under American Canal can be planned, subject to route and crossing review. The canal runs for 1.0 channel miles inside Fifth Street, and waterway jurisdiction is checked during planning. We set the bore depth to stay beneath the channel and keep entry and exit pits on land beside the crossing.
Who owns electric lines in Fifth Street, Fort Bend County, and who confirms conduit specs?
CenterPoint Energy reports electric service in Fort Bend County, but that does not establish the owner at every Fifth Street address. Confirm the specific line owner and conduit requirements before planning a bore, including on a route near Moore Road. The owner can identify the applicable line and specifications for that address.
How much notice does Texas811 need for a Fifth Street bore near Moore Road?
For work near Moore Road, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. When a Fifth Street start moves more than 14 days past the original notice, we submit a new request. Before continuing work on Fifth Street, we have worn or moved marks refreshed through Texas811.
Does the 477 road miles from Yukon to Fifth Street near Stafford change the job?
We use the 477 road miles and 9.3 hour drive from our Yukon, Oklahoma main office to plan underground work in Fifth Street. That distance can affect mobilization and planning for a job near Stafford or elsewhere in the community. The exact route and scope help us plan the crew and equipment needed.
What affects the cost of directional boring near US 90 Alternate in Fifth Street?
The price depends on the route and scope, including bore length, pipe or conduit size, Lake Charles clay, utilities to expose, pavement, pits and drainage crossings. A route toward US 90 Alternate may require highway coordination, while the distance from Yukon affects mobilization. We assess the specific alignment rather than relying on footage alone.
Where the Fifth Street facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Fifth Street
- U.S. Census Bureau, TIGER/Line 2024: Fifth Street boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Fifth Street population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Fifth Street housing units and year built
- Macrostrat geologic map compilation: map units under Fifth Street
- U.S. Department of Transportation, North American Rail Network: track owners in Fort Bend County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Fort Bend County
- U.S. Geological Survey, Elevation Point Query Service: Fifth Street elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Fifth Street
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Fifth Street
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Fifth Street, Texas
Type the address of your job in Fifth Street. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Fifth Street
Same county: Fulshear · Houston · Rosenberg · Mission Bend · Cinco Ranch · Pecan Grove · Richmond · Four Corners · Katy · Pearland · Weston Lakes · Needville. All counties: Texas county list.
