Edmonson Texas Directional Boring: Pullman Clay Loam, Highway 194, 1st Street
Quick Answer: Pullman clay loam holds an open hole, but sticky cuttings can build on a reamer. We do directional boring, also called horizontal directional drilling (HDD), for Edmonson routes such as Texas State Highway 194. Edmonson is 334 road miles from our Yukon, Oklahoma main office, with FM 1424 also inside town. On 1st Street, the clay loam ground calls for staged reaming and a ready pipe pull.
Edmonson bores at a glance
- Incorporated city in Hale County, Texas. Population 87 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 334 miles, about 6.2 hours of driving.
- Ground: Pullman soil is mapped on 91 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 194 and FM 1424. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: Lubbock and Western Railway, with 3 mapped street and rail crossings.
- Public water: City of Edmonson, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Edmonson, Hale County?
Pullman clay loam can hold a bore open, while sticky cuttings need control. We take directional boring and horizontal directional drilling (HDD) work in Edmonson, Hale County. The Census Bureau Vintage 2024 estimate places Edmonson’s population at 87, which we consider when planning underground work there. Our crews install water, sewer, gas, electric conduit and fiber along routes such as 1st Street and Texas State Highway 194.
Our main office is in Yukon, Oklahoma, and Edmonson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that began in 1965, with directional boring work dating to 1982. For Edmonson’s 1st Street and Texas State Highway 194, our range runs from 3/4 inch service lines to 48 inch casing.

What is Pullman soil like to bore in Edmonson?
The USDA soil survey maps Pullman soil across 91 percent of Edmonson, mainly as Pullman clay loam with 0 to 1 percent slopes. Surface texture is clay loam over 91 percent of the mapped area and loam over 9 percent. At about 40 inches, clay loam is mapped across 99 percent, with average clay content of 39 percent. These are mapped conditions, not test borings. For a bore near 1st Street, expect sticky material that can cling to the reamer and swell around pipe.
| USDA soil survey, inside the Edmonson city limits | What is mapped |
|---|---|
| Soil series mapped | Pullman 91 percent, Estacado 4 percent and Olton 3 percent |
| Texture at the surface | clay loam 91 percent and loam 9 percent |
| Texture about 40 inches down | clay loam 99 percent |
| Engineering class about 40 inches down | lean clay (CL) 99 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 99 percent of the area |
Bedrock is not mapped in Edmonson’s top five feet, though that does not rule out deeper rock. The USDA soil survey maps a seasonal water table within 60 inches across 1 percent of the area, and no flood prone soils are mapped. High steel corrosion risk covers 99 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil corrosion concern. The Blackwater Draw Formation is Cenozoic, with sand, silt and locally clayey material; Cenozoic sedimentary rocks are also mapped as Paleocene.
How do crews bore Edmonson’s clay loam?
Pullman clay loam dominates Edmonson, and its clay can stick to the reamer or grip the pipe. On routes such as 1st Street, we match fluid and reaming steps to the ground.
- For Pullman clay loam near 1st Street, we use thinner drilling fluid and polymer to limit sticky cuttings building on the reamer.
- With Edmonson’s mapped clay content of 39 percent at about 40 inches, we ream in stages and prepare the pipe before opening the final hole.
- Where a route approaches Texas State Highway 194, we watch fluid returns and keep pressure controlled to reduce the chance of lifting pavement.
- On an Edmonson bore, we hydrovac expose marked utilities along the path, then track the drill head and log its depth and pitch.

Which roads and tracks could a bore cross in Edmonson near 1st Street?
Texas State Highway 194 has 1.6 mapped roadway miles inside Edmonson, and FM 1424 has 1.2. TxDOT identifies both as state highways, so a route near either may involve highway right of way. The longest named street is 1st Street at 1.6 miles. South Merrill runs 0.4 miles, and 2nd Street runs 0.22 miles. Those streets can shape access and bore length, while Pullman clay loam can affect reaming and pipe pull.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 194 | State highway | 1.6 roadway miles inside | State highway office |
| FM 1424 | State highway | 1.2 roadway miles inside | State highway office |
| Lubbock and Western Railway | Railroad | 2.13 track miles inside | The railroad |
The Lubbock and Western Railway has 2.13 track miles inside Edmonson, with 3 mapped street and rail crossings. No streams are mapped inside town, and there are no mapped named stream crossings or lakes and ponds within one mile. That leaves the railway and road intersections as the mapped crossing features to account for. A route near 1st Street still needs its actual utilities located and exposed before drilling.
Who approves Edmonson bores near the Lubbock and Western Railway?
Edmonson is incorporated, so its city streets, including 1st Street and South Merrill, belong to the city. Texas State Highway 194 and FM 1424 are state highways; the line owner, not the driller, applies through TxDOT’s RULIS system. The TxDOT Lubbock District reviews that application, and we prepare the bore plan and profile for the utility owner. TxDOT cover requirements depend on the line: electric and communication crossings need 60 inches below the lowest crossed grade, while water crossings need 60 inches and pressurized sewer crossings need 60 inches. Work under the Lubbock and Western Railway requires an agreement with the railroad owner.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Edmonson near the City of Edmonson water system?
The City of Edmonson public water system uses groundwater wells and reports 30 service connections serving 67 people. For electric work, Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative report service in Hale County. Those reports do not identify the provider at every Edmonson address. We confirm the line owner before planning an electric conduit bore near the City of Edmonson system.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Edmonson | Public water system | Groundwater wells | 30 connections, 67 people served |
| Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Hale County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Edmonson’s median housing year at 1969, a local context we consider when planning underground work. The estimates show 26 percent of homes built before 1960, 63 percent from 1960 to 1999 and 11 percent in 2000 or later. A route along 1st Street may serve an older replacement or a newer service, so we hydrovac pothole marked utilities along the bore path before drilling near them. Paint marks position, not depth.

How far is Edmonson from Plainview and nearby places?
Edmonson is in Hale County at an elevation of 3,503 feet and covers 0.43 square miles. ZIP code 79032 serves the town. Kress is 10.4 miles northeast, Plainview is 11.6 miles southeast, Seth Ward is 12.3 miles east, Hart is 14.5 miles northwest, and Hale Center is 15.0 miles south. Plainview is the county seat and nearest larger city, southeast of Edmonson. From our Yukon, Oklahoma main office, the trip is 334 road miles and 6.2 hours, which affects mobilization for a job near Texas State Highway 194.
Places near Edmonson
- Directional boring in Kress: 10.4 miles northeast
- Directional boring in Plainview: 11.6 miles southeast
- Directional boring in Seth Ward: 12.3 miles east
- Directional boring in Hart: 14.5 miles northwest
- Directional boring in Hale Center: 15 miles south
What would we bore near South Merrill in Edmonson?
- Highway crossing: A bore beneath Texas State Highway 194 keeps the existing roadway uncut and follows the TxDOT permit plan.
- Water service: A connection near the City of Edmonson system needs a route matched to the groundwater well network and exposed existing lines.
- Fiber route: A fiber conduit along 1st Street can be installed below the road surface, with marked utilities exposed before drilling nearby.
- Rail crossing: A bore under the Lubbock and Western Railway needs an agreement with the track owner and a crossing plan.
- Street service: A sewer or water line along South Merrill can be bored between dirt pits rather than opened across the street.
- Electric conduit: A route near FM 1424 starts with confirming the line owner and the conduit requirements for that address.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Edmonson work near Texas State Highway 194?
For an Edmonson quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Texas State Highway 194 or South Merrill lets us see which road, track or marked utility crossings may affect the plan.
The price follows the work at the actual Edmonson site. Ground conditions matter: Pullman clay loam can take staged reaming and careful fluid control. Crossings matter too, including the Lubbock and Western Railway and Texas State Highway 194. Length, pipe size, exposed utilities, pavement, pits, excavator time and sand backfill all shape the scope. The 334 road miles from Yukon also affect mobilization, while emergency timing or a high profile job can add planning needs.
Questions people ask about boring in Edmonson
Does Trinity Boring Solutions take directional boring jobs in Edmonson, Hale County?
Yes. We take directional boring work in Edmonson, Hale County, using our own crews and partner contractor satellite yards we have vetted. For an Edmonson project, we work with Trinity from the first call through the bore log, coordinating with whichever crew is assigned to the site. The route could be along 1st Street or near Texas State Highway 194.
Is a bore in Edmonson likely to hit rock?
The USDA mapping does not show bedrock in Edmonson’s top five feet, but that does not rule out rock deeper down. The map identifies the Blackwater Draw Formation, with sand, silt and locally clayey material, plus Paleocene Cenozoic sedimentary rocks. A site check still guides the bore plan near South Merrill.
Who approves our bore beneath Texas State Highway 194 in Edmonson before we plan the crossing?
TxDOT reviews the highway utility permit through its Lubbock District. The utility owner files in TxDOT’s RULIS system, and we prepare the bore plan and profile for that application. For Texas State Highway 194, the permit sets the project conditions, including the required cover for the line being installed.
What does an Edmonson bore under the Lubbock and Western Railway require?
A crossing beneath the Lubbock and Western Railway needs an agreement from the railroad that owns the track. For a crossing beneath Texas State Highway 194, we use the agreement to set casing, depth and flagging details before boring. With 2.13 track miles in Edmonson and 3 mapped street and rail crossings, the actual route determines the crossing plan.
Who runs the water system in Edmonson, and where does its water come from?
The City of Edmonson owns the public water system, which draws from groundwater wells. It reports 30 service connections and 67 people served. For a bore near 1st Street, we still locate and expose marked utilities before the drill gets near existing water lines.
Which electric company serves an Edmonson address in Hale County?
Hale County electric service is reported by Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative. Those reports do not establish which provider serves each address in Edmonson. We confirm the line owner before planning conduit work near Texas State Highway 194.
How far is Edmonson from the Yukon office, and does nearby Plainview affect the job?
From our Yukon, Oklahoma main office, Edmonson is 334 road miles away, a 6.2 hour drive that we factor into planning. Plainview is 11.6 miles southeast and is the county seat. The distance from Yukon affects mobilization for work in Edmonson, including a bore on 1st Street.
How much notice does Texas811 need for a bore near 1st Street in Edmonson?
Request a locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work near 1st Street starts more than 14 days after the original notice, make a new request. Before resuming a crossing under Texas State Highway 194 in Edmonson, we refresh any marks that wear off or move through Texas811.
What affects the cost of directional boring under Texas State Highway 194 in Edmonson?
Length, pipe or conduit size, Pullman clay loam, marked utilities, pavement, pits and the number of crossings all affect the price. A bore under Texas State Highway 194 may involve highway permitting, while a route near the Lubbock and Western Railway adds a track crossing to plan. Mobilization from Yukon is another job factor.
Where the Edmonson facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Edmonson
- U.S. Census Bureau, TIGER/Line 2024: Edmonson boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Edmonson
- U.S. Census Bureau, American Community Survey 2019 to 2023: Edmonson housing units and year built
- Macrostrat geologic map compilation: map units under Edmonson
- U.S. EPA Safe Drinking Water Information System: public water systems serving Edmonson
- U.S. Department of Transportation, North American Rail Network: track owners in Hale County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hale County
- U.S. Geological Survey, Elevation Point Query Service: Edmonson elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Edmonson
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Edmonson
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Edmonson, Texas
Type the address of your job in Edmonson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Edmonson
Same county: Abernathy · Petersburg. All counties: Texas county list.
