trinityboringsolutions.com

Estelline Texas Directional Boring: Enterprise Soil, US 287 and BNSF Railway

Quick Answer: With BNSF Railway and US 287 in Estelline, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Texas for lines beneath crossings without cutting them. From the Yukon, Oklahoma main office, Estelline is 234 road miles away, and that trip matters when a bore along Harper Street needs mobilization. USDA maps show Enterprise very fine sandy loam across much of town, including at about 40 inches. In Enterprise soil, that fine material can move during drilling, so we control fluid and keep pipe ready for pullback.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Estelline bores at a glance

  • Incorporated city in Hall County, Texas. Population 123 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 234 miles, about 4.4 hours of driving.
  • Ground: Enterprise soil is mapped on 75 percent of the area, with very fine sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 287 and Texas State Highway 86. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: BNSF Railway, with 1 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Estelline near BNSF Railway?

Estelline is an incorporated town in Hall County, with 123 residents in the Census Bureau Vintage 2024 estimate. On Harper Street and the town’s 11.78 public road miles, we can bore water, sewer, gas, electric conduit or fiber lines beneath driveways and road crossings, keeping surface cuts out of the route where the plan allows.

Our main office is in Yukon, Oklahoma, and Estelline work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our reach includes a roughly 4,100 foot, 48 inch pipe bore under the Arkansas River in Tulsa. A job along Estelline streets is typically shorter, with the route and crossings setting the work.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Estelline Enterprise soil present?

The USDA soil survey maps Enterprise soil across 75 percent of Estelline, with Hardeman at 20 percent and Lincoln at 5 percent. Enterprise very fine sandy loam is the leading map unit. At about 40 inches, very fine sandy loam is mapped over 75 percent of the area, fine sandy loam over 20 percent and fine sand over 5 percent. Average clay content at that depth is 13 percent, and sandy material covers 25 percent. These mapped patterns guide planning, but they are not test borings.

USDA soil survey, inside the Estelline city limitsWhat is mapped
Soil series mappedEnterprise 75 percent, Hardeman 20 percent and Lincoln 5 percent
Texture at the surfacevery fine sandy loam 75 percent, fine sandy loam 20 percent and loamy fine sand 5 percent
Texture about 40 inches downvery fine sandy loam 75 percent, fine sandy loam 20 percent and fine sand 5 percent
Engineering class about 40 inches downsilt (ML) 75 percent, clayey sand (SC) 20 percent and silty clayey sand (SC SM) 5 percent
Average clay content about 40 inches down13 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel0 percent of the area

USDA mapping does not place bedrock in Estelline’s top five feet. The geologic map shows Holocene sand sheet deposits and Guadalupian sedimentary rock of Permian age; the sand deposits are described as permeable with a shallow water table. The soil survey maps no seasonal water table within 60 inches, but we still watch for wet ground at pits. Flood prone soils cover 5 percent, while high steel corrosion risk is not mapped. Near Mountain Creek, route depth and fluid returns need attention.

What does it take to bore Estelline’s very fine sandy loam?

Estelline’s mapped very fine sandy loam and fine sand can loosen under excess drilling fluid. We set the bore path, expose marked lines, then steer with controlled fluid and track the head as we work.

  1. On an Enterprise soil route, we expose marked utilities with hydrovac before the drill approaches; paint along Harper Street shows position, not depth.
  2. The mapped fine sandy loam and fine sand can cave behind the bit, so we use drilling fluid to support the hole and ream in stages.
  3. Along US 287 pavement, we keep fluid pressure controlled to limit the chance of lifting the surface, while tracking the drill head from above.
  4. At a BNSF Railway crossing or a route toward Mountain Creek, we log depth and pitch as the head advances and keep pits in the dirt beside the crossing.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross in Estelline near US 287?

US 287 runs 1.3 roadway miles within Estelline, and Texas State Highway 86 adds 0.6 miles. A line crossing either route needs a path and work area that fit the road and its right of way. The town has 11.78 public road centerline miles. Burnett Street is the longest named street at 1.32 miles, followed by Harper Street at 1.02 miles and Katie Street at 0.84 miles. A bore under these streets can keep pavement intact when the alignment and pits allow it.

CrossingTypeMapped extentWho has a say
US 287US highway1.3 roadway miles insideState highway office
Texas State Highway 86State highway0.6 roadway miles insideState highway office
BNSF RailwayRailroad0.51 track miles insideThe railroad
Mountain CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Prairie Dog Town Fork Red RiverStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 0.51 track miles inside Estelline, and one mapped street and rail crossing makes track clearance part of route planning. No named stream runs inside the town limits. Mountain Creek is 0.4 miles from the limits, and the Prairie Dog Town Fork Red River is 0.6 miles away; neither has a mapped street crossing inside town. A route toward either channel needs separate attention to depth and ground conditions.

Who approves a bore in Estelline and Hall County?

Estelline is incorporated, so its public streets, including Burnett Street, belong to the town itself. For work in the right of way of US 287 or Texas State Highway 86, the line owner, not the driller, files the utility permit through TxDOT’s RULIS system. TxDOT’s Childress District reviews it. We prepare the bore plan and profile for the owner’s filing and work under the permit issued to that owner. TxDOT cover rules set 60 inches below the lowest crossed grade for electric and communication lines, and 60 inches for water lines at highway crossings. A BNSF Railway crossing needs an agreement with BNSF, and a crossing near Mountain Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve addresses in Estelline and Hall County?

The water provider for a specific Estelline address has to be confirmed with the town, Hall County or the local water district before a bore is planned. County electric service is reported by AEP Texas North, Southwestern Electric Power, Lighthouse Electric Cooperative and South Plains Electric Cooperative. Those reports do not identify the provider at every Katie Street address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas North, Southwestern Electric Power, Lighthouse Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Hall CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Estelline’s median housing year at 1940; 81 percent of homes were built before 1960, and none were built in 2000 or later. On Harper Street, an older property may need a replacement connection rather than a new service. We use hydrovac potholing to expose each marked utility on the bore path before drilling near it, since surface marks do not show a line’s depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

What is near Estelline, including Memphis?

Estelline is in Hall County, 13.7 miles southeast of the county seat, Memphis, and 11.8 miles northwest of Childress, the nearest larger city. The town covers 0.73 square miles, sits at an elevation of 1,836 feet and uses ZIP code 79233. Lakeview is 17.0 miles northwest; Wellington is 24.8 miles northeast. From our Yukon, Oklahoma main office, the drive is 234 road miles and 4.4 hours. That distance affects mobilization for work on US 287 or the BNSF Railway crossing.

Places near Estelline

What would we bore on Estelline’s Harper Street?

  • Highway crossing: A bore beneath US 287 or Texas State Highway 86 keeps the route below the pavement, with the line owner’s permit handled through TxDOT.
  • Water service: A replacement service near Katie Street can be bored between suitable pit locations after the address water provider is confirmed.
  • Fiber conduit: A run along Harper Street can pass below driveways, with marked lines exposed before the drill gets close.
  • Rail crossing: A proposed route beneath BNSF Railway needs the railroad owner’s agreement and a plan for its crossing conditions.
  • Creek approach: A line toward Mountain Creek calls for attention to channel depth and review of possible Corps jurisdiction during planning.
  • Street connection: A sewer or electric conduit route near Burnett Street can be planned to avoid opening the street surface where access permits.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote an Estelline bore near Mountain Creek?

For a Harper Street or US 287 quote, send the address or map pin, what goes in the ground, pipe or conduit size and footage; a sketch or plans help. Show any route near BNSF Railway or toward Mountain Creek on the sketch. Those details let us see where the bore starts, ends and meets crossings.

The job route sets the scope, not footage alone. Estelline’s 234 road miles from Yukon affect mobilization, while Enterprise soil and fine sand shape drilling and fluid control. The count of utilities to expose, pavement at a US 287 crossing, BNSF Railway clearance, creek or drainage conditions, pits, excavator time and sand backfill all change the work. High profile or emergency timing can add planning demands.

Questions people ask about boring in Estelline

Does Trinity Boring Solutions take jobs in Estelline and Hall County, and who staffs them?

Yes. We take directional boring work in Estelline, Hall County, with our own crews and support from satellite yards operated by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a route near US 287.

Who controls Katie Street in Estelline, and can a bore avoid cutting it?

Estelline is incorporated, so Katie Street is a town street. A directional bore can pass beneath the street without cutting its surface if the route, pits and approvals fit the site. We check marked utilities along the path before drilling near Katie Street.

What do Estelline’s older homes along Harper Street mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1940, with 81 percent of homes built before 1960. A Harper Street project may replace an older connection or add a new service. We pothole marked utilities first because their depth cannot be read from surface marks.

What does Enterprise soil in Estelline look like about 40 inches down?

The USDA soil survey maps very fine sandy loam over 75 percent of Estelline at about 40 inches, with fine sandy loam over 20 percent and fine sand over 5 percent. That mapped profile can loosen if overworked with fluid, so it helps shape the drilling plan.

Will we encounter rock while boring in Estelline, and what ground conditions should guide our route and depth?

Bedrock is not mapped in the top five feet of Estelline, but the geologic map includes Guadalupian sedimentary rock of Permian age below the mapped surface deposits. That does not establish what is at a specific bore depth, so the route still needs site specific planning.

Who approves a bore beneath US 287 in Estelline?

The line owner applies for a TxDOT utility permit for work in the US 287 right of way, and TxDOT’s Childress District reviews it. We prepare the bore plan and profile for the owner’s filing. The permit sets the approved route and cover requirements.

How much notice does Texas811 need for an Estelline bore on Burnett Street?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Burnett Street start slips more than 14 days after the original notice, submit a new request. Before work continues, we refresh worn or moved marks through Texas811 to keep the Estelline work area marked.

How far is Estelline from the Yukon office, and does Childress make the job easier?

Estelline is 234 road miles and a 4.4 hour drive from our Yukon, Oklahoma main office, so we plan travel time into underground work schedules. Childress is 11.8 miles southeast of town, but it does not change the Yukon mobilization distance. For a job near US 287, route length and crossing requirements also shape mobilization.

When we price directional boring near US 287 in Estelline, how do crossing length, access, and ground conditions affect cost?

The job details determine the price. Distance from Yukon, bore length, pipe size, Enterprise soil, utilities to expose, pavement at US 287, pits, excavator time and drainage crossings all affect the scope. A BNSF Railway crossing or emergency work can add planning and coordination needs.

Where the Estelline facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Estelline

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Estelline, Texas

Type the address of your job in Estelline. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Estelline

Same county: Turkey. All counties: Texas county list.