trinityboringsolutions.com

Childress Texas Directional Boring: St. Paul Soil, US 287 and BNSF Railway

Quick Answer: St. Paul silt loam is Childress’s main mapped soil; its fine material can wash out if drilling fluid pressure is too high. We handle directional boring, also called horizontal directional drilling (HDD), for crossings along US 287 and other Childress routes. The Yukon, Oklahoma main office is 224 road miles away, with BNSF Railway tracks among the local crossing conditions we plan around. At about 40 inches, clay loam is mapped across 53 percent of the city, so we control fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Childress bores at a glance

  • County seat of Childress County, Texas. Population 5,683 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 224 miles, about 4.3 hours of driving.
  • Ground: St. Paul soil is mapped on 53 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 8 percent of the area.
  • Highways inside the boundary: US 287, US 62, US 83, FM 164 and FM 3031. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: BNSF Railway, with 9 mapped street and rail crossings.
  • Public water: City of Childress, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near US 287 in Childress?

St. Paul silt loam is the main mapped soil in Childress, and the Census Bureau Vintage 2024 estimate puts the population at 5,683. We take water, sewer, gas, electric conduit and fiber work, including service routes from US 287 toward properties along Avenue F. The line type, size and path shape the bore plan for each address in Childress County.

Our main office is in Yukon, Oklahoma, and Childress work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982 while planning Childress crossings. That experience matters for Childress routes where St. Paul silt loam overlies mapped clay loam.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What is Childress ground like around St. Paul soil?

The USDA soil survey maps St. Paul silt loam across 53 percent of Childress, with Carey loam covering 34 percent; these are mapped patterns, not test borings. Surface texture is silt loam over 53 percent and loam over 46 percent. At about 40 inches, clay loam is mapped over 53 percent and loam over 34 percent, while very fine sandy loam covers 12 percent. The soil at that depth is mostly classified CL, so cuttings may cling to a reamer and the hole needs controlled fluid.

USDA soil survey, inside the Childress city limitsWhat is mapped
Soil series mappedSt. Paul 53 percent, Carey 34 percent, Woodward 7 percent and Paducah 4 percent
Texture at the surfacesilt loam 53 percent and loam 46 percent
Texture about 40 inches downclay loam 53 percent, loam 34 percent and very fine sandy loam 12 percent
Engineering class about 40 inches downlean clay (CL) 94 percent and silt (ML) 5 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches8 percent of the area (0 percent hard rock, 8 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

USDA mapping places bedrock within 60 inches in 8 percent of Childress, typically at 26 inches, and maps that rock as weathered rather than hard. A soil to rock transition can steer a drill head off line, so we track depth and pitch carefully. For Childress crossings, we plan for seasonal water table and flood prone soils, which are not mapped. High steel corrosion risk is not mapped either. The geologic map names the Permian Whitehorse Group, undivided, with sandstone, shale, gypsum and dolostone; weathered rock may slow a bore.

What does it take to bore Childress clay loam?

Childress has silt loam at the surface and clay loam mapped deeper down. We adjust drilling fluid and reaming to the cuttings, then keep the bore path under observation along streets such as Avenue F.

  1. St. Paul silt loam covers 53 percent of Childress, so we keep fluid pressure controlled to avoid washing out the softer surface material.
  2. With clay loam mapped at about 40 inches, we ream in stages and manage sticky cuttings before pulling pipe through the opened hole.
  3. Where the mapped profile meets weathered bedrock, we slow the advance and track depth and pitch to hold the planned route beneath Childress streets.
  4. Before drilling near Avenue F, we hydrovac marked utilities along the bore path; the paint shows position, while potholing reveals actual depth.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Childress near BNSF Railway?

US 287 runs 3.9 mapped roadway miles inside Childress, alongside US 62, US 83 and several farm to market roads. FM 164 has 6.0 mapped miles in the city. Avenue F is the longest named street at 5.02 miles, followed by Avenue C at 3.57 miles and Avenue B at 3.42 miles. A route beneath those roads needs a bore plan that accounts for the specific pavement and the utilities on its path. Loop 328 lies 1.3 miles outside the city limits.

CrossingTypeMapped extentWho has a say
US 287US highway3.9 roadway miles insideState highway office
US 62US highway0.7 roadway miles insideState highway office
US 83US highway0.7 roadway miles insideState highway office
FM 164State highway6 roadway miles insideState highway office
FM 3031State highway1.2 roadway miles insideState highway office
FM 2530State highway1.1 roadway miles insideState highway office
FM 401State highway1 roadway miles insideState highway office
FM 268State highway0.6 roadway miles insideState highway office
Loop 328Highway nearby1.3 miles outsideState highway office
BNSF RailwayRailroad6.03 track miles insideThe railroad
Conkline CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Grassy CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
North Groesbeck CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Lake ScottLake or pond21 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 6.03 track miles inside Childress on the Red River Valley Subdivision, and public mapping shows 9 street and rail crossings in the city. A crossing beneath the tracks needs an agreement with BNSF Railway. No named streams are mapped inside the limits, and no street crossings of named streams are mapped there. Conkline Creek and Grassy Creek are each 0.2 miles outside the city limits; Lake Scott and Park Lake are inside the limits.

Who has to sign off on a bore in Childress County?

For work in the right of way of US 287, US 62, US 83 or FM 164, the utility owner applies through TxDOT’s RULIS system, and the TxDOT Childress District reviews the application. We prepare the bore plan and profile for the utility owner’s filing. TxDOT rules require utility lines beneath an existing highway to be bored or tunneled, with cover and casing details set by the applicable permit. Childress is incorporated, so its city streets are under city authority. A bore under BNSF Railway requires the railroad’s agreement, while a planned Conkline Creek crossing is checked for federal waterway jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Childress system?

We plan Childress underground work around the City of Childress system, which serves 6,105 people through 2,250 service connections using purchased surface water. For electric work, AEP Texas North, Southwestern Electric Power, Greenbelt Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative report service in Childress County. We confirm the electric line owner before planning a conduit bore, since the reported utilities do not identify the provider at every Avenue F address.

Line ownerWhat it isSourceSize
City of ChildressPublic water systemSurface water bought from another system2,250 connections, 6,105 people served
AEP Texas North, Southwestern Electric Power, Greenbelt Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Childress CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Childress’s median housing year at 1969; 41 percent of homes were built before 1960, and 20 percent were built in 2000 or later. That mix can mean either replacement work or a new service near US 287. Before drilling, we hydrovac marked utilities along the planned path; this exposes lines connected to the City of Childress water system or an electric provider before the drill approaches.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Childress and nearby Estelline?

Childress is the county seat of Childress County, at an elevation of 1,952 feet, and covers 8.26 square miles. Its ZIP code is 79201. Estelline is 11.8 miles northwest, and Memphis is 25.0 miles northwest. Childress is 224 road miles and 4.3 drive hours from our Yukon, Oklahoma main office, a distance that can affect mobilization for a bore on US 287 or a route toward Estelline.

Places near Childress

What boring work comes up in Childress near Conkline Creek?

  • Highway crossing: A bore beneath US 287 avoids cutting the pavement, with the utility owner arranging the TxDOT permit.
  • Water service: A new line near Avenue F can connect toward the City of Childress system after existing utilities are exposed.
  • Fiber route: Conduit beneath US 83 can carry communications while the road surface stays intact.
  • Creek crossing: A route near Conkline Creek needs depth planning and a check for federal waterway jurisdiction.
  • Rail crossing: A bore below BNSF Railway tracks needs an agreement with the railroad before work proceeds.
  • Park service: A line near Fair Park can be routed beneath paved access rather than opened by trenching.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Childress work near Avenue F?

A map pin matters because a route beside Avenue F differs from a crossing near US 287 or Conkline Creek. Send the address or pin, what will go underground, pipe or conduit size and footage. A sketch or plans help us check the path, access and likely crossings before we prepare a quote.

The price follows the work planned near Avenue F, not a general rate for Childress. A short, clear route through mapped St. Paul soil may be simpler to plan than a longer bore through clay loam. Pipe size, length, utility exposures, pavement, creek or drainage crossings, pits, backfill and excavator time all affect the scope. A US 287 or BNSF Railway crossing adds coordination, and the 224 road miles from Yukon can affect mobilization.

Questions people ask about boring in Childress

Does Trinity take directional boring jobs in Childress County, and who staffs them?

Yes. We take directional boring work in Childress County, using our own crews or crews from satellite yards operated by drilling partners we have vetted. You coordinate with Trinity from the first call through the bore log, regardless of who is on site. That gives a Childress job one point of contact for the planned route and work record.

Is there rock under Childress, and how much is mapped near the surface?

The USDA soil survey maps bedrock within 60 inches in 8 percent of Childress, with a typical depth of 26 inches. The mapped bedrock is weathered, and hard bedrock is not mapped within that depth. Near the St. Paul soil areas, we watch for a change from soil to rock because it can affect steering.

Who approves a bore under US 287 in Childress?

For work in the US 287 right of way, the utility owner files the permit application through TxDOT’s RULIS system, and the TxDOT Childress District reviews it. For a Childress filing, we provide its bore plan and profile for the proposed crossing. TxDOT rules call for boring or tunneling beneath an existing highway, with the permit establishing the project details.

What does a bore under BNSF Railway in Childress need?

A crossing under BNSF Railway needs an agreement from the railroad that owns the Childress track. The agreement addresses the crossing conditions, including casing, depth and flagging. The railroad has 6.03 track miles inside the city, so the proposed bore location and route must be identified for the crossing request.

Can a line be bored under Conkline Creek near Childress?

A bore can be planned near Conkline Creek, which is mapped 0.2 miles outside Childress city limits. During planning, we check whether the US Army Corps of Engineers has jurisdiction over a Childress crossing. The route and depth need to account for the channel, and the specific location determines the required planning.

Who runs Childress’s public water system, and does it use purchased surface water?

The City of Childress owns and runs the public water system, which uses purchased surface water. We account for the public system in Childress underground planning, with 6,105 people served through 2,250 service connections. For a bore near a water line on Avenue F, we expose marked utilities before drilling close to them so the route can account for the existing system.

How early should I request locates for a bore on Avenue F in Childress?

Count back at least two working days from the planned start on Avenue F; Texas law requires 48 hours, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days ahead, and a start delayed more than 14 days past the original notice needs a new request. Before work continues in Childress, we refresh worn or moved marks through Texas811.

How far is Childress from Trinity’s Yukon office, and does that matter?

Childress is 224 road miles from our Yukon, Oklahoma main office, about 4.3 drive hours away. That distance can affect mobilization for work near US 287, especially when the job needs extra equipment or more than one setup. The route, footage and access details help us plan the trip and crew needs.

What affects the cost of directional boring near US 287 in Childress?

The job scope sets the price: bore length and pipe size, soil or rock, utility exposures, pavement, pits, backfill and drainage crossings all matter. A route through clay loam or below US 287 may need more planning than a clear path along Avenue F. BNSF Railway crossings and mobilization from Yukon can also affect the work.

Where the Childress facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Childress

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Childress, Texas

Type the address of your job in Childress. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Childress

All counties: Texas county list.