trinityboringsolutions.com

Hale Center Texas Directional Boring: Pullman Clay Loam, Interstate 27, BNSF Railway

Quick Answer: Pullman clay loam holds an open bore but sticks to the reamer. Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), beneath BNSF Railway routes in Hale Center, Texas. The Yukon, Oklahoma main office is 342 road miles from Avenue J, which shapes mobilization planning. USDA maps clay loam across 70 percent of Hale Center, so we manage sticky cuttings with thinner fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hale Center bores at a glance

  • Incorporated city in Hale County, Texas. Population 2,000 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 342 miles, about 6.3 hours of driving.
  • Ground: Pullman soil is mapped on 70 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 27, US 87, FM 1424 and FM 1914. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Public water: City of Hale Center, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Avenue J in Hale Center?

Pullman clay loam holds a bore open but can cling to the reamer. We install water, sewer, gas, electric conduit and fiber along Hale Center routes such as Avenue J and Main Street. The Census Bureau Vintage 2024 estimate puts Hale Center at 2,000 people in Hale County. The route and line type guide how we plan each crossing.

Our main office is in Yukon, Oklahoma, and Hale Center work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Against that reach, a bore under Main Street or Avenue K is planned around its specific route and ground. Our family business started in 1965, and we have done directional boring since 1982 for Hale Center requests.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Pullman soil like to bore in Hale Center?

Pullman soil covers 70 percent of Hale Center, and the USDA soil survey maps Pullman clay loam on 68 percent of the city area. Olton loam accounts for 23 percent, while Randall clay accounts for 4 percent. About 40 inches below the surface, the mapped texture is clay loam across 96 percent of the area, with an average clay content of 40 percent. In Hale Center, our mapping shows no sandy ground at that depth, a distinction we consider when planning a bore. For Hale Center, we use these mapped patterns as planning context, not test borings, before shaping a boring approach. The clay can hold the bore open, but sticky cuttings can collect on the reamer.

USDA soil survey, inside the Hale Center city limitsWhat is mapped
Soil series mappedPullman 70 percent, Olton 26 percent and Randall 4 percent
Texture at the surfaceclay loam 70 percent, loam 26 percent and clay 4 percent
Texture about 40 inches downclay loam 96 percent and clay 4 percent
Engineering class about 40 inches downlean clay (CL) 96 percent and fat clay (CH) 4 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches4 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Across Hale Center, bedrock is not mapped in the top five feet, so we account for possible deeper rock when planning. A seasonal water table within 40 inches is mapped in 4 percent of the area, so pits there may need pumping. For Hale Center routes, flood prone soils are not mapped, and we still check site conditions before planning a bore. High steel corrosion risk covers 100 percent of the mapped area, which makes casing and tracer wire material a line owner concern; For Hale Center planning, we recognize that HDPE is not affected by soil corrosion when considering underground materials. The Cenozoic Blackwater Draw Formation includes sand, silt and locally clayey material, and the map also shows Paleocene Cenozoic sedimentary rocks.

How do we drill Hale Center clay loam?

Pullman clay loam covers much of Hale Center and can cling to a reamer. We adjust fluid and reaming to the ground, while the route near Avenue J or BNSF Railway sets access and crossing needs.

  1. Pullman clay loam can ball onto the reamer, so we use thinner fluid and staged reaming to keep the cuttings manageable along a route near Avenue K.
  2. Because heavy clay can build pressure under pavement, we watch fluid returns on a bore near Interstate 27 and keep pressure controlled beneath the roadway.
  3. We expose marked utilities by hydrovac before drilling near them; near the City of Hale Center water system, that means confirming each marked line’s position and depth.
  4. A walkover locator tracks the drill head, and we log depth and pitch as the bore advances beneath a Main Street route.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where does a line have to go under BNSF Railway in Hale Center?

Interstate 27 and US 87 each have 2.2 mapped roadway miles inside Hale Center, while FM 1424 has 2.0 miles and FM 1914 has 0.7 miles. A utility route beneath one of these highways needs a bore plan that accounts for the right of way. Avenue J is the longest named street at 1.13 miles, followed by Avenue K at 1.09 miles and Main Street at 1.08 miles. These streets give projects local route options without assuming a particular line location.

CrossingTypeMapped extentWho has a say
Interstate 27Interstate2.2 roadway miles insideState highway office
US 87US highway2.2 roadway miles insideState highway office
FM 1424State highway2 roadway miles insideState highway office
FM 1914State highway0.7 roadway miles insideState highway office
BNSF RailwayRailroad1.85 track miles insideThe railroad
Swipe the table sideways to see every column.

The BNSF Railway Plainview Subdivision has 1.85 track miles inside Hale Center, and 3 mapped street and rail crossings make track location part of route planning. A crossing of BNSF Railway needs an agreement with the railroad that owns the track. No streams are mapped inside Hale Center or within one mile outside its limits, and no lakes or ponds are mapped within one mile. That means no named creek crossing is identified in these records.

Who approves a bore in Hale County near Hale Center?

Because Hale Center is incorporated, we treat city streets as belonging to Hale Center when considering permissions for directional boring. Work in the right of way of Interstate 27, US 87, FM 1424 or FM 1914 needs a TxDOT utility permit. The line owner, not our drilling crew, files through TxDOT’s RULIS system for review by the TxDOT Lubbock District; we prepare the bore plan and profile for the owner’s application. TxDOT cover rules include 60 inches for electric or communication lines at highway crossings and 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along it; pressurized sewer crossings need 60 inches. A BNSF Railway crossing requires an agreement with the railroad. No stream crossing is mapped near Hale Center.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the water lines near City of Hale Center in Hale Center?

The City of Hale Center public water system uses groundwater wells and reports 896 service connections serving 1,705 people. For a water bore near Avenue J, that system is a relevant local reference, but the line owner and exact route still need confirmation. Electric service reported in Hale County includes Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric Cooperative. We confirm the electric line owner for the address before planning a conduit bore.

Line ownerWhat it isSourceSize
City of Hale CenterPublic water systemGroundwater wells896 connections, 1,705 people served
Southwestern Public Service, Lamb County Electric Cooperative, Lighthouse Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Hale CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use Hale Center’s American Community Survey 2019 to 2023 five year estimates of a 1967 median housing year as context for underground planning. We factor Hale Center survey estimates into underground planning: 39 percent of homes built before 1960, 57 percent from 1960 to 1999, and 4 percent in 2000 or later. A replacement route near Main Street may need to account for older buried lines as well as new service connections. Before drilling near a marked water or electric line, we hydrovac pothole it; paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Hale Center and nearby Seth Ward?

Hale Center is an incorporated city in Hale County, with an elevation of 3,426 feet and a land area of 1.44 square miles. Its ZIP code is 79041. Plainview, the county seat and nearest larger city, is 11.1 miles northeast; Seth Ward is 13.5 miles northeast. Edmonson is 15.0 miles north, Abernathy is 16.5 miles south and Olton is 18.4 miles northwest. The Yukon, Oklahoma main office is 342 road miles away, a 6.3 hour drive, so that distance is part of mobilization planning for a Hale Center route.

Places near Hale Center

What kinds of bores come up near Main Street in Hale Center?

  • Highway crossing: A route beneath Interstate 27 needs a bore plan and profile that address TxDOT right of way and pavement.
  • Water service: A new connection near the City of Hale Center system starts with confirming the line owner and exposing marked utilities.
  • Fiber drop: A conduit route near Avenue J can pass beneath pavement without opening the street surface.
  • Rail crossing: A bore beneath BNSF Railway needs the railroad owner’s agreement and a route planned to its crossing conditions.
  • Street replacement: A sewer or water replacement under Main Street can keep the paved surface uncut while pits sit off the bore path.
  • State road route: Work along FM 1424 needs the utility owner’s TxDOT permit for the right of way.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Hale Center bore near Interstate 27?

A map pin matters near Interstate 27 because a small route shift can change whether the bore meets highway right of way or a street crossing. Send the Hale Center address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the route near BNSF Railway or Main Street.

A straightforward route through Pullman clay loam with few marked utilities may take less planning than a crossing near Interstate 27 or BNSF Railway. Price reflects bore length, pipe or conduit size, soil, exposed utility crossings, pavement, pits and excavator time. Creek or drainage crossings would add planning, though none are mapped near Hale Center. The 342 road miles from Yukon shape how we plan mobilization for directional boring work in Hale Center. For Hale Center projects, we adjust scope when high profile or emergency work changes the requirements.

Questions people ask about boring in Hale Center

Does Trinity Boring Solutions take jobs in Hale Center and Hale County, and who staffs them?

Yes. Across Texas, we take directional boring requests in Hale Center, including work planned around city streets. Our own crews and partner drilling contractors Trinity has vetted can staff the work, depending on the job. You deal with Trinity from the first call through the bore log, whether the crew is near Avenue J or another Hale County route.

Who controls Main Street in Hale Center, and can a bore avoid cutting it?

Because Hale Center is incorporated, we treat city streets as belonging to Hale Center when considering permissions for directional boring. A bore under Main Street can leave the paved surface uncut, with entry and exit pits placed in dirt where the route allows. The exact plan depends on marked utilities, access and the crossing layout.

How do Hale Center’s older homes near Avenue K affect replacement bores?

The American Community Survey 2019 to 2023 five year estimates give Hale Center a median housing year of 1967, with 39 percent of homes built before 1960. Replacement work near Avenue K may encounter existing buried lines, so we expose marked utilities before drilling close to them and plan the bore around what is found.

Does Pullman soil in Hale Center corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 100 percent of Hale Center. That makes steel casing and tracer wire material worth discussing with the line owner. For Hale Center planning, we recognize that HDPE is not affected by soil corrosion when considering underground materials. The right pipe depends on the line design and the owner’s requirements near Pullman soil.

What ground does a bore pass through in Hale Center’s Pullman soil?

Pullman soil covers 70 percent of Hale Center, and clay loam is mapped across 96 percent of the area at about 40 inches below the surface. The mapped average clay content there is 40 percent. This ground can hold an open bore, but sticky cuttings may cling to the reamer, so staged reaming and fluid control matter.

Will a bore in Hale Center hit rock below the mapped soil?

Bedrock is not mapped in the top five feet of Hale Center, but that does not rule out rock deeper down. The geologic map shows the Cenozoic Blackwater Draw Formation, which includes sand, silt and locally clayey material, as well as Paleocene Cenozoic sedimentary rocks. Site conditions still guide the drilling plan.

Can I reach Trinity after hours about an urgent Main Street bore in Hale Center?

Yes. We answer Hale Center calls through Trinity’s phone, where a person responds 24 hours a day at (405) 409-7423. For an urgent bore near Main Street, call with the location and what line is involved so we can understand the request. Trinity also provides 24 hour emergency response.

How much notice does Texas811 need before a bore near Avenue J in Hale Center?

For a bore near Avenue J, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Hale Center work, we submit a new request if the start slips more than 14 days past the original notice. Before we continue Hale Center work, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore near Interstate 27 in Hale Center?

The route and scope set the price. Length, pipe size, Pullman clay loam, utility crossings, pavement, pits and excavator time all matter. Work near Interstate 27 or BNSF Railway may add crossing requirements, while mobilization reflects the 342 road miles from Yukon. Creek crossings are not mapped near Hale Center.

Where the Hale Center facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hale Center

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hale Center, Texas

Type the address of your job in Hale Center. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hale Center

Same county: Petersburg. All counties: Texas county list.