Morse Texas Directional Boring: Oslo Soil, FM 1775 and Texas North Western Railway
Quick Answer: We take directional boring and horizontal directional drilling (HDD) work in Morse, Texas, including routes beneath FM 1775 without cutting pavement. From our Yukon, Oklahoma main office, Morse is 271 road miles away, and our crews or vetted partner contractors can staff work near Texas North Western Railway. Oslo silty clay loam is mapped across 60 percent of the community, so sticky cuttings and pipe grip shape the reaming plan. That ground favors staged reaming and a ready pipe pull on routes near 3rd Street.
Morse bores at a glance
- Unincorporated community in Hansford County, Texas. Population 157 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 271 miles, about 5.4 hours of driving.
- Ground: Oslo soil is mapped on 60 percent of the area, with silty clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 1775. State permit office: TxDOT Amarillo District.
- Railroad track inside the boundary: Texas North Western Railway.
- Public water: Morse Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Morse near Texas North Western Railway?
Morse is 271 road miles from our Yukon yard, and work near 3rd Street is staffed by our crews or vetted partner drilling contractors. The Census Bureau counted 157 residents in the 2020 Census; it does not publish yearly estimates for this unincorporated place. Along FM 1775 or 2nd Street, we can bore routes for water, sewer, gas, electric conduit and fiber lines.
Our main office is in Yukon, Oklahoma, and Morse work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that began in 1965, and directional boring has been part of our work since 1982. The range runs from 3/4 inch service lines to 48 inch casing, with bore lengths suited to projects near 2nd Street or FM 1775.

What does Oslo soil mean for a bore in Morse?
The USDA soil survey maps Oslo soil across 60 percent of Morse, chiefly as Oslo silty clay loam on 1 to 3 percent slopes. About 40 inches below the surface, silty clay loam covers 60 percent of the mapped area, while fine sandy loam covers 23 percent. The survey reports average clay content of 29 percent at that depth and maps sandy ground across 12 percent. In Morse, we use mapped soil patterns as planning context, not as test borings. For a route near FM 1775, the clay rich ground can hold the hole open but stick to the reamer and grip pipe.
| USDA soil survey, inside the Morse mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Oslo 60 percent, Gruver 16 percent, Mobeetie 12 percent and Alibates 11 percent |
| Texture at the surface | silty clay loam 60 percent, clay loam 16 percent and loam 13 percent |
| Texture about 40 inches down | silty clay loam 60 percent, fine sandy loam 23 percent and clay loam 17 percent |
| Engineering class about 40 inches down | lean clay (CL) 77 percent, silty clayey sand (SC SM) 12 percent and clayey sand (SC) 11 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 16 percent of the area |
Bedrock is not mapped in the top five feet around the Oslo soil areas, but that does not rule out deeper rock. The geologic map shows calcrete and granitic clast loamy to gravelly colluvium of Quaternary age and the Ogallala Formation of Pliocene age, with sand, silt, clay and gravel. For Morse planning, we treat seasonal water table and flood prone soils as unmapped. High steel corrosion risk covers 16 percent of the area, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil corrosion concern.
How do we bore Morse silty clay loam?
Oslo silty clay loam covers much of Morse, so we plan for clay that can cling to tooling and hold the bore open. Along 3rd Street, staged reaming and a controlled fluid mix help manage that sticky ground.
- On an Oslo silty clay loam route near 3rd Street, we use a thinner drilling fluid mix and ream in stages to manage clay that clings to tooling.
- Because the mapped soil can grip pipe, we have the pipe ready before the final ream and plan the pull so the open hole does not sit waiting.
- Before approaching marked lines along 2nd Street, we use hydrovac potholing to expose them; surface paint gives position, not burial depth.
- As a bore advances near FM 1775, we track the drill head from the surface and log its depth and pitch to guide the path.

Which roads and tracks can a bore cross in Morse near FM 1775?
FM 1775 runs 0.4 roadway miles inside the mapped community boundary, and Texas State Highway 136 is 0.6 miles outside it. A bore under FM 1775 can avoid cutting existing pavement. The longer named streets include 3rd Street at 0.6 miles, 2nd Street at 0.54 miles and 5th Street at 0.51 miles inside the community. Their routes give a practical starting point for mapping service work, but the proposed bore path still needs to be checked for pavement and buried lines.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1775 | State highway | 0.4 roadway miles inside | State highway office |
| Texas State Highway 136 | Highway nearby | 0.6 miles outside | State highway office |
| Texas North Western Railway | Railroad | 0.25 track miles inside | The railroad |
| North Palo Duro Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| South Palo Duro Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
Texas North Western Railway has 0.25 track miles inside Morse, and none of the mapped streets cross the track inside the community. North Palo Duro Creek is 0.2 miles from the boundary and South Palo Duro Creek is 0.4 miles away; neither runs inside the mapped community. No street crossings of named streams are mapped inside Morse, and no lakes or ponds are mapped within one mile. Those creek locations still matter if a proposed route reaches a channel.
Who approves a bore in Morse in Hansford County?
Morse is an unincorporated community, so it has no city government to permit its streets; the county or state is responsible, depending on the road. FM 1775 is a state highway, and the TxDOT Amarillo District reviews the utility permit for work in its right of way. The utility owner submits the application through TxDOT RULIS, while we prepare the bore plan and profile and work under that owner’s permit. A bore beneath existing FM 1775 pavement goes by boring or tunneling. The Texas North Western Railway track needs an agreement from the railroad, and a North Palo Duro Creek crossing is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground near Morse Water Supply Corporation?
Morse Water Supply Corporation serves 100 people through 62 connections, using groundwater wells. That system matters when planning a service route near 2nd Street, but the line owner and exact route need to be confirmed before a crossing. Electric service reported in Hansford County includes Southwestern Public Service, North Plains Electric Cooperative, Rita Blanca Electric Cooperative and Tri-County Electric Cooperative. We confirm the electric line owner for the address before planning a conduit bore, rather than assuming one provider serves every property near FM 1775.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Morse Water Supply Corporation | Public water system | Groundwater wells | 62 connections, 100 people served |
| Southwestern Public Service, North Plains Electric Cooperative, Rita Blanca Electric Cooperative and Tri-County Electric Cooperative | Electric utilities reporting service in Hansford County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median housing year in Morse at 1958; 55 percent of homes were built before 1960 and 1 percent in 2000 or later. That age can make a replacement bore along 2nd Street different from a new service, but it does not establish the age or location of any buried line. We use hydrovac potholing to expose marked utilities before drilling near them, since paint alone does not show their depth.

Where is Morse in relation to Stinnett?
Morse is in Hansford County, at an elevation of 3,198 feet, and covers 0.55 square miles. Its ZIP code is 79062. Gruver is 14.0 miles north, while Stinnett is 16.9 miles south; Spearman, the county seat, is 18.2 miles northeast. Borger, the nearest larger city, is 28.4 miles south. From our Yukon yard, the drive to Morse is 271 road miles and 5.4 hours, so distance is part of planning mobilization for work near FM 1775.
Places near Morse
- Directional boring in Gruver: 14 miles north
- Directional boring in Stinnett: 16.9 miles south
- Directional boring in Spearman: 18.2 miles northeast
- Directional boring in Sunray: 19.7 miles west
- Directional boring in Sanford: 25.3 miles south
- Directional boring in Borger: 28.4 miles south
What bore jobs fit Morse near 3rd Street?
- Highway crossing: A bore beneath FM 1775 can pass under existing pavement, with the route planned for the road’s travel lanes.
- Water service: A new or replacement line near 2nd Street can connect to a property while avoiding an open cut across the street.
- Fiber route: A conduit bore along 3rd Street can carry fiber with the path checked for marked utilities before drilling.
- Rail crossing: Work beneath the Texas North Western Railway track needs the railroad’s agreement before the crossing plan is set.
- Creek approach: A route toward North Palo Duro Creek can be planned around the channel if the proposed path reaches it.
- Electric conduit: Near FM 1775, we first confirm the line owner and locate existing utilities along the planned route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Morse bore near 6th Street?
For a route near 6th Street, start with the address or a map pin and tell us what needs to go underground. We also need the pipe or conduit size and the footage. A sketch or plans help show whether the path follows 6th Street, crosses FM 1775 or approaches the Texas North Western Railway track.
The Oslo silty clay loam is an early cost consideration because sticky cuttings can call for staged reaming and careful fluid control. We also look at bore length, pipe or conduit size, utilities to expose, and pavement along FM 1775. A railroad crossing adds coordination with Texas North Western Railway, while creek work can affect the plan. Pits, excavator time, sand backfill, emergency timing and mobilization from 271 road miles away can also change the job scope.
Questions people ask about boring in Morse
Does Trinity Boring Solutions take Morse jobs in Hansford County, and who staffs them?
Yes. We take directional boring work in Morse, with crews from our Yukon operation and vetted partner drilling contractors available to staff projects near FM 1775. From the first call through the bore log, we work with Trinity for Morse, regardless of which crew is at the site. Morse is in Hansford County and is 271 road miles from Yukon.
How old are the homes and buried lines near Morse 2nd Street?
The housing survey gives a median build year of 1958, with 55 percent of homes built before 1960. That can make a replacement bore near 2nd Street different from a new service, but housing age does not prove when any buried line was installed. We expose marked utilities with hydrovac before the drill approaches them.
What ground does a Morse bore go through in Oslo soil?
The USDA soil survey maps Oslo soil over 60 percent of Morse, mainly silty clay loam. At about 40 inches below the surface, silty clay loam is mapped across 60 percent of the area. This soil can hold a bore open while sticking to tooling, so staged reaming matters near streets such as 3rd Street.
Will a Morse directional bore hit rock?
Bedrock is not mapped in the top five feet of the Morse area, though the map cannot rule out deeper rock. The geologic map shows Quaternary calcrete and granitic clast loamy to gravelly colluvium and the Pliocene Ogallala Formation. A route near FM 1775 still needs to be planned for the ground encountered along its path.
Who approves a Morse bore beneath FM 1775?
TxDOT’s Amarillo District reviews a utility permit for work in the FM 1775 right of way. The utility owner applies through TxDOT RULIS, and we supply the bore plan and profile for that application. Existing highway pavement is crossed by boring or tunneling, not by an open trench.
What does a Morse crossing under Texas North Western Railway require?
The Texas North Western Railway owns the 0.25 track miles mapped inside Morse, and a crossing needs an agreement with the railroad. That agreement determines crossing conditions such as casing, depth and flagging. No mapped street crosses the track inside the community, but a proposed private route still needs railroad coordination.
Does the distance from Yukon affect a Morse job near Borger?
Morse is 271 road miles and a 5.4 hour drive from our Yukon yard, with Borger 28.4 miles south of Morse. The distance can affect mobilization for a bore near FM 1775. The planned length, soil, crossings and equipment needs also shape the work.
How much 811 notice do I need for a Morse bore near 3rd Street?
Request a locate through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If a 3rd Street start slips more than 14 days past the original notice, submit a new request. Before work continues in Morse, we refresh worn or moved marks through Texas811.
What affects the cost of directional boring in Morse near FM 1775?
The bore length and pipe or conduit size matter, along with Morse’s Oslo silty clay loam, utilities to expose and pavement at FM 1775. A Texas North Western Railway or creek crossing can add planning needs. Pits, excavator time, backfill, emergency timing and mobilization from Yukon also affect the job scope.
Where the Morse facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Morse
- U.S. Census Bureau, TIGER/Line 2024: Morse boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Morse population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Morse housing units and year built
- Macrostrat geologic map compilation: map units under Morse
- U.S. EPA Safe Drinking Water Information System: public water systems serving Morse
- U.S. Department of Transportation, North American Rail Network: track owners in Hansford County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hansford County
- U.S. Geological Survey, Elevation Point Query Service: Morse elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Morse
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Morse
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Morse, Texas
Type the address of your job in Morse. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Morse
All counties: Texas county list.
