Quanah Texas Directional Boring: Tillman Clay, US 287 And BNSF Railway
Quick Answer: Quanah is an incorporated county seat, so the city owns its streets; our directional boring, also called horizontal directional drilling (HDD), can carry lines beneath 11th Street or US 287. Yukon is 187 road miles away, and a route through Quanah may cross BNSF Railway track. USDA maps show Tillman clay loam, with clay at about 40 inches; sticky heavy clay can ball on a reamer and grip pipe. That calls for controlled fluid and staged reaming on a Quanah bore.
Quanah bores at a glance
- County seat of Hardeman County, Texas. Population 2,181 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 187 miles, about 3.9 hours of driving.
- Ground: Tillman soil is mapped on 68 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 12 percent of the area.
- Highways inside the boundary: US 287, Texas State Highway 6, FM 2568, FM 104 and FM 2640. State permit office: TxDOT Childress District.
- Railroad track inside the boundary: BNSF Railway, with 9 mapped street and rail crossings.
- Public water: City of Quanah, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Quanah near US 287?
Quanah is an incorporated city in Hardeman County, where city streets such as Main Street belong to the city. For directional boring planning in Quanah, we use the Census Bureau Vintage 2024 estimate of 2,181 residents as population context. We install water, sewer, gas, electric conduit and fiber on routes beneath 11th Street, US 287 or other Quanah streets, with each route planned around marked utilities.
Our main office is in Yukon, Oklahoma, and Quanah work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982 for work planned in Quanah. For a service crossing near Main Street, our equipment handles lines from 3/4 inch service lines to 48 inch casing and bores from 10 feet to 5,000 feet.

How does Tillman soil affect drilling in Quanah?
The USDA soil survey maps Tillman soil across 68 percent of Quanah, with Tillman clay loam map units covering 34 percent at 1 to 3 percent slopes and 34 percent at 0 to 1 percent slopes. Clay loam makes up 99 percent of mapped surface texture. At about 40 inches below the surface, clay is mapped under 88 percent of the area, and average clay content at that depth is 42 percent. When we plan work in Quanah, we treat these mapped patterns as guidance only, not as test borings. Sticky clay can collect on a reamer, while heavy clay can grip pipe as it is pulled through.
| USDA soil survey, inside the Quanah city limits | What is mapped |
|---|---|
| Soil series mapped | Tillman 68 percent, Hollister 15 percent, Vernon 6 percent, Weymouth 5 percent and Gageby 3 percent |
| Texture at the surface | clay loam 99 percent |
| Texture about 40 inches down | clay 88 percent, clay loam 6 percent and sandy clay loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 88 percent and lean clay (CL) 11 percent |
| Average clay content about 40 inches down | 42 percent |
| Bedrock mapped within 60 inches | 12 percent of the area (1 percent hard rock, 11 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 88 percent of the area |
The USDA soil survey maps bedrock within five feet under 12 percent of Quanah: 11 percent is weathered and 1 percent is hard. Typical mapped bedrock depth is 27 inches, so a bore may meet softer rock sooner than expected. Seasonal water tables are not mapped within five feet, while flood prone soils cover 3 percent. High steel corrosion risk is mapped under 88 percent, a concern for steel casing and tracer wire that the line owner should address. The Quaternary red siltstone and shale clast loamy colluvium includes clay, shale and siltstone, so ground changes can affect steering.
How is a bore run through Quanah clay?
Tillman clay loam dominates the mapped surface in Quanah, so we plan for sticky cuttings and pipe that can bind. A walkover locator tracks the drill head while we control fluid and reaming.
- We check the planned Quanah route against Tillman clay loam and marked utilities, then hydrovac expose each marked line before the drill approaches it.
- In Quanah’s heavy clay, we use a fluid mix suited to sticky cuttings and ream in stages so clay does not build up on the tool.
- We keep fluid pressure controlled beneath paved streets such as Main Street, since heavy clay can hold pressure that may lift pavement.
- Where the Quanah route meets the mapped siltstone or shale unit, we watch depth and pitch at each rod because soil to rock changes can push the head off line.

Which roads or tracks might a Quanah bore cross near 11th Street?
US 287, Texas State Highway 6, FM 2568, FM 104, FM 2640 and Loop 285 run within Quanah. A crossing on a state or US route needs a different plan from a bore beneath a city street. 11th Street is the longest named street in the mapped network at 2.04 miles, followed by Main Street at 1.81 miles and Nelson Street at 1.73 miles. 4th Street runs 1.68 miles. A bore can keep pavement and driveways intact, with entry and exit pits placed off the paved route.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 287 | US highway | 3 roadway miles inside | State highway office |
| Texas State Highway 6 | State highway | 2.5 roadway miles inside | State highway office |
| FM 2568 | State highway | 1.2 roadway miles inside | State highway office |
| FM 104 | State highway | 1.4 roadway miles inside | State highway office |
| FM 2640 | State highway | 0.5 roadway miles inside | State highway office |
| Loop 285 | State highway | 0.3 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 6.15 track miles inside | The railroad |
| Spring Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway owns 6.15 track miles within Quanah, including the Chickasha and Red River Valley subdivisions. Public mapping shows 9 street and rail crossings in the city, so a proposed route needs to be checked against the actual track alignment. No named streams cross the city, and no street crossings of named streams are mapped. Spring Creek is 0.4 mile outside the city limits, and the mapped unnamed drainage inside Quanah totals 0.15 mile. For Quanah crossing plans, we account for the map showing no lakes or ponds within one mile.
Who signs off on a Quanah bore under BNSF Railway?
US 287 and the other state and farm to market routes in Quanah are under TxDOT jurisdiction, with review through the TxDOT Childress District. The utility owner, not our crew, submits a right of way application in TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. A crossing under BNSF Railway needs an agreement from the track owner, which sets requirements such as casing, depth and flagging. Spring Creek is outside the city, but any creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities should we check before boring in Hardeman County in Quanah?
The City of Quanah public water system uses purchased surface water and reports 1,256 service connections serving 2,662 people. A water bore near Main Street still needs the exact line location checked. AEP Texas North and South Plains Electric Cooperative report electric service in Hardeman County; that does not identify the provider at every Quanah address. We confirm the line owner before planning an electric conduit bore and expose marked utilities along the route before drilling near them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Quanah | Public water system | Surface water bought from another system | 1,256 connections, 2,662 people served |
| AEP Texas North and South Plains Electric Cooperative | Electric utilities reporting service in Hardeman County | EIA Form 861 | Confirm the line owner by address |
For underground work planning in Quanah, we consider the American Community Survey 2019 to 2023 five year estimates, which put median housing year at 1960. The American Community Survey estimates 51 percent of Quanah homes were built before 1960, 48 percent from 1960 to 1999 and 1 percent in 2000 or later, context for planning underground work. Work along older streets such as 4th Street may involve replacing an existing line, while a newer service has its own route. Hydrovac potholing exposes marked lines because locate paint shows position, not depth.

How far is Quanah from Crowell and our Yukon yard?
Quanah is the county seat of Hardeman County, Texas, at an elevation of 1,571 feet and with 3.48 square miles of land. Its ZIP code is 79252. Chillicothe is 13.3 miles east, Crowell is 21.6 miles south, and Vernon is 27.3 miles east; Vernon is the nearest larger city. Our Yukon yard is 187 road miles away, a drive of 3.9 hours. That distance is part of planning mobilization for work along US 287 or a route near BNSF Railway.
Places near Quanah
- Directional boring in Chillicothe: 13.3 miles east
- Directional boring in Crowell: 21.6 miles south
- Directional boring in Lockett: 25.7 miles southeast
- Directional boring in Vernon: 27.3 miles east
- Directional boring in Childress: 32.3 miles west
What would we bore near Main Street in Quanah?
- Highway crossing: A bore beneath US 287 can keep the pavement intact, with the utility owner’s TxDOT permit shaping the route.
- Water service: A connection near Main Street can tie into the City of Quanah system after the line location is confirmed.
- Fiber conduit: A route along 11th Street can pass under pavement and driveways without cutting the street surface.
- Rail crossing: A route beneath BNSF Railway track needs the railroad agreement and crossing conditions planned before drilling.
- Drainage crossing: The mapped unnamed drainage in Quanah calls for a route that stays beneath the channel rather than disturbing its banks.
- Airport utility: A service route near Quanah Municipal Airport can be planned around marked lines and the required pit locations.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Quanah bore near 4th Street?
For a bore near 4th Street or US 287, send the address or map pin, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us place the route against the street, marked utilities and any crossing before we scope the work.
In Quanah, we set the price according to the job scope, including the crossing work involved. Tillman clay can mean staged reaming and careful fluid control, while a route beneath US 287 or BNSF Railway adds crossing requirements and planning. We also account for length, pipe or conduit size, other utilities to expose, pavement, drainage, pits and excavator time. Quanah is 187 road miles from Yukon, so mobilization is part of the estimate. High profile or emergency work can change the planning needs.
Questions people ask about boring in Quanah
Does Trinity take directional boring work in Quanah and Hardeman County?
Yes. We take directional boring work in Quanah and across Texas, planning each crossing around the route and site conditions. The Yukon main office stays the point of contact, with our own crews and partner contractor yards supporting the work. For a route near Main Street, you deal with Trinity from the first call through the bore log, whichever crew is on site.
What ground should I expect for a Quanah bore in Tillman soil?
The USDA soil survey maps Tillman clay loam across much of Quanah. At about 40 inches below the surface, clay is mapped under 88 percent of the area, so sticky cuttings and pipe grip can affect the pull. These mapped patterns are not test borings; the route still needs to be checked for site conditions.
Is there rock near the surface for a directional bore in Quanah?
Rock is mapped within five feet under 12 percent of Quanah, with 11 percent weathered bedrock and 1 percent hard bedrock. The mapped typical depth is 27 inches. That can mean a bore near the mapped siltstone and shale unit slows or needs a different tool as the ground changes.
Who approves a Quanah bore under US 287?
TxDOT reviews work in the US 287 right of way through its Childress District. The utility owner applies through TxDOT’s online RULIS system, while we provide the bore plan and profile and work under the permit issued to the owner. A proposed route near Main Street that does not enter state right of way follows a different path.
What does a Quanah bore beneath BNSF Railway require?
BNSF Railway owns the track within Quanah, and a crossing needs an agreement from the railroad. Its conditions cover matters such as casing, depth and flagging. The mapped street and rail crossing locations help identify possible conflicts, but the proposed bore route must be checked against the track itself.
Can a line be bored under Spring Creek near Quanah?
A bore can be planned beneath Spring Creek, which is mapped 0.4 mile outside Quanah’s limits. During Quanah planning, we check whether a crossing falls under US Army Corps of Engineers jurisdiction before setting the work plan. The route and depth must account for the channel, and pits can be placed on the banks without cutting across the surface.
What bore sizes and lengths can Trinity handle for a job near Quanah 4th Street?
Our equipment range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route near 4th Street depends on what the line carries, the ground and the crossings along the alignment. We can review a sketch or plans with the location.
How early should I call Texas811 for a Quanah bore near 11th Street?
For a bore near 11th Street, Texas law requires a locate request at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before the start. If a Quanah start slips more than 14 days past the original notice, we submit a new request. Worn or moved marks need refreshing through Texas811 before work continues.
What affects the price of a directional bore under US 287 in Quanah?
The price reflects the route and scope, not just its length. Tillman clay, pipe size and footage affect the drilling plan; a US 287 or BNSF Railway crossing adds coordination. The number of utilities to expose, pavement, drainage, pits, excavator time and mobilization from Yukon also factor into the estimate.
Where the Quanah facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Quanah
- U.S. Census Bureau, TIGER/Line 2024: Quanah boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Quanah
- U.S. Census Bureau, American Community Survey 2019 to 2023: Quanah housing units and year built
- Macrostrat geologic map compilation: map units under Quanah
- U.S. EPA Safe Drinking Water Information System: public water systems serving Quanah
- U.S. Department of Transportation, North American Rail Network: track owners in Hardeman County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hardeman County
- U.S. Geological Survey, Elevation Point Query Service: Quanah elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Quanah
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Quanah
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Quanah, Texas
Type the address of your job in Quanah. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Quanah
All counties: Texas county list.
