Acala Texas Directional Boring: Glendale Soil, Interstate 10 And Union Pacific
Quick Answer: What does the top five feet near Soto Road look like, and what lies below? The USDA survey maps Glendale soil and silty clay loam at about 40 inches, over Holocene sand sheet deposits. We do directional boring, also called horizontal directional drilling (HDD), beneath Interstate 10 and Union Pacific track in Acala. Our Yukon main office is 685 road miles from Acala, near the Union Pacific route. Glendale clay holds a hole but can grip pipe, so staged reaming matters.
Acala bores at a glance
- Unincorporated community in Hudspeth County, Texas. Population 11 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 685 miles, about 12.8 hours of driving.
- Ground: Glendale soil is mapped on 63 percent of the area, with silty clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 10 and Texas State Highway 20. State permit office: TxDOT El Paso District.
- Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
- Named streams inside the boundary: Hudspeth Main Canal.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Soto Road in Acala?
What does the top five feet look like around Soto Road, and what is under it? The USDA survey maps Glendale soil, with silty clay loam at about 40 inches and Holocene sand sheet deposits. Acala is an unincorporated community in Hudspeth County; the Census Bureau counted 11 residents in 2020. We install water, sewer, gas, electric conduit and fiber along routes such as Acala Road and Texas State Highway 20.
Our main office is in Yukon, Oklahoma, and Acala work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from 3/4 inch service lines to 48 inch casing, with bores from 10 feet to 5,000 feet. The family business began in 1965 and has done directional boring since 1982, experience relevant to Acala’s highway and rail routes.

How does Glendale soil affect a bore in Acala?
The USDA soil survey maps Glendale series across 63 percent of Acala, with Copia at 34 percent and Queencreek at 3 percent. At about 40 inches below the surface, the mapped Glendale soils are silty clay loam, classified as CL. The survey reports an average clay content of 19 percent at that depth, while sandy ground accounts for 37 percent of the mapped area. These are mapped patterns, not test borings. Silty clay loam can hold the hole open, but it can stick to the reamer and grip pipe during pullback.
| USDA soil survey, inside the Acala mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Glendale 63 percent, Copia 34 percent and Queencreek 3 percent |
| Texture at the surface | silt loam 63 percent, fine sand 27 percent and sand 8 percent |
| Texture about 40 inches down | silty clay loam 63 percent, loamy fine sand 27 percent and sand 8 percent |
| Engineering class about 40 inches down | lean clay (CL) 63 percent, silty sand (SM) 27 percent and sand with silt (SP SM) 8 percent |
| Average clay content about 40 inches down | 19 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 66 percent of the area |
| High corrosion risk for uncoated steel | 63 percent of the area |
Bedrock is not mapped in Acala’s top five feet, and seasonal water tables are not mapped within 60 inches; neither map result rules out conditions at a specific bore. Flood prone soils cover 66 percent of the mapped area, so a route near Hudspeth Main Canal needs channel depth planning. High steel corrosion risk is mapped across 63 percent, a concern for casing and tracer wire that the line owner should consider. The geologic map identifies Holocene sand sheet deposits, which can be permeable and lose support around an open hole.
How is a bore run through Acala’s silty clay loam?
At about 40 inches, Acala’s mapped silty clay loam calls for attention to sticky returns and pipe grip. We adjust fluid and reaming to the ground, then track the bore beneath local routes such as Soto Road.
- In Glendale silty clay loam, we use fluid suited to sticky ground and ream in stages so clay does not build up on the cutting tools.
- Where Acala’s mapped sand sheet deposits are present, we support the bore wall with drilling fluid and have the pipe ready before the final reaming pass.
- Near flood prone ground mapped around Hudspeth Main Canal, we plan the bore depth beneath the channel and check whether Corps jurisdiction applies.
- Along Soto Road, we locate and expose marked utilities with hydrovac before drilling near them, then track the drill head and record depth and pitch.

What does a bore have to cross in Acala near Union Pacific?
Interstate 10 runs 1.4 mapped roadway miles inside Acala, and Texas State Highway 20 runs 1.5 miles. A line beneath either highway needs a bore or tunnel rather than open trenching through existing pavement. Soto Road is the longest named street at 1.37 miles inside the mapped community boundary; Masedos runs 1.12 miles and Acala Road 1.02 miles. Because Acala has no city government, street work is a county matter unless the route is on state right of way.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 | Interstate | 1.4 roadway miles inside | State highway office |
| Texas State Highway 20 | State highway | 1.5 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.51 track miles inside | The railroad |
| Hudspeth Main Canal | Stream | 1.77 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Río Grande | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 1.51 track miles inside Acala on its Valentine Subdivision, and one street and rail crossing is mapped. Any route beneath that track needs an agreement with the railroad owner before the crossing is planned. Hudspeth Main Canal runs 1.77 channel miles inside the community, where five street crossings of named streams are mapped. The Río Grande is 0.4 miles from the mapped boundary, so any proposed water crossing needs its own site review.
Whose permission does a bore need in Hudspeth County in Acala?
Acala has no city government, so county streets such as Soto Road and Acala Road are not city streets. For work in Interstate 10 or Texas State Highway 20 right of way, the line owner, not Trinity, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that application. The TxDOT El Paso District reviews it. Electric and communication crossings need 60 inches of cover below the lowest crossed grade, water needs 60 inches, and pressurized sewer needs 60 inches. TxDOT may set another depth, and highway crossings are encased and extend beneath all travel lanes on rural highways.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Hudspeth County near Acala?
The water provider for a particular Acala address has to be confirmed with the county or local water district before a bore is planned; public records do not match a provider to this community. El Paso Electric and Rio Grande Electric Cooperative report service in Hudspeth County, but that does not establish which one owns lines at a specific address. Before an electric conduit bore along Acala Road, we confirm the line owner and the conduit requirements with that owner.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| El Paso Electric and Rio Grande Electric Cooperative | Electric utilities reporting service in Hudspeth County | EIA Form 861 | Confirm the line owner by address |
Housing data are not published for a place as small as Acala, so the public survey does not establish the age of local services. Long runs along Texas State Highway 20 or Soto Road may matter more than a short connection near a building. Hudspeth County averages 10.5 inches of precipitation a year, with July wettest at 2.1 inches and March driest at 0.3. Before drilling near water or electric lines, we hydrovac pothole marked utilities so their depth is known, not just their painted position.

Where is Acala in relation to Tornillo and Yukon?
Acala is an unincorporated community in Hudspeth County, at an elevation of 3,577 feet and with 2.84 square miles of land. ZIP code 79839 covers the area. Fort Hancock is 4.6 miles southeast, while Tornillo is 13.8 miles northwest and Fabens is 18.9 miles northwest. Fabens is the nearest larger city; Sierra Blanca, the county seat, is 34.9 miles east. The Yukon main office is 685 road miles away, a 12.8 hour drive, so distance can affect crew mobilization for a bore along Interstate 10.
Places near Acala
- Directional boring in Fort Hancock: 4.6 miles southeast
- Directional boring in Tornillo: 13.8 miles northwest
- Directional boring in Fabens: 18.9 miles northwest
- Directional boring in Morning Glory: 24.1 miles northwest
- Agua Dulce: 26.1 miles northwest
Which jobs call for a bore near Hudspeth Main Canal in Acala?
- Highway crossing: A bore beneath Interstate 10 or Texas State Highway 20 keeps the route below the roadway rather than cutting through existing pavement.
- Water service: A service along Acala Road needs its address specific water provider and existing line locations confirmed before a bore is laid out.
- Electric conduit: Along Soto Road, we confirm the electric line owner and expose marked utilities before the drill approaches their route.
- Rail crossing: A crossing beneath the Union Pacific Valentine Subdivision is planned with the railroad owner’s agreement and its requirements.
- Canal crossing: A bore under Hudspeth Main Canal needs depth planning for the channel and a check for federal water crossing jurisdiction.
- Fiber route: A longer fiber bore beside Texas State Highway 20 can avoid cutting pavement, with utility exposures planned along the route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a bore near Interstate 10 in Acala?
For an Acala quote, send the address or map pin, what will go underground, the pipe or conduit size, and the footage; a sketch or plans help. A route near Interstate 10 or the Union Pacific track is useful to identify early because the crossing plan affects equipment, access and approvals.
The job scope determines the price. In Acala, the Glendale soil and its silty clay loam can affect reaming and fluid needs, while sand sheet deposits may need more support around the hole. The number of marked utilities to expose, highway or Union Pacific crossings, pavement, and drainage near Hudspeth Main Canal all change the work. Length, pipe size, pits, excavator time and sand backfill matter too. Mobilization from the Yukon office is part of planning at 685 road miles from Acala.
Questions people ask about boring in Acala
Does Trinity take directional boring jobs in Acala and Hudspeth County?
Yes. Trinity Boring Solutions takes directional boring work in Acala and across Texas. Our main office is in Yukon, and the job is handled with our own crews or partner contractor crews from satellite yards. You deal with Trinity through the bore log, whether the route is near Soto Road or Interstate 10.
Who approves a bore under Interstate 10 in Acala?
For work in Interstate 10 right of way, the line owner applies through TxDOT’s RULIS system, and the TxDOT El Paso District reviews it. We supply the bore plan and profile for the owner’s application. The permit addresses the crossing details, including cover and casing, for the specific Acala route.
What does an Acala bore under Union Pacific track require?
Union Pacific owns the track in Acala, with 1.51 track miles mapped inside the community. A crossing needs an agreement with the railroad before the route is set. Its agreement establishes requirements for the crossing, including casing, depth and flagging, and a mapped street and rail crossing is present.
Can a line be bored under Hudspeth Main Canal in Acala?
A line can be planned beneath Hudspeth Main Canal, which has 1.77 channel miles inside Acala. The route must be designed for depth beneath the channel, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. The canal is also among the mapped local stream crossings.
Which electric company owns a line at an Acala address in Hudspeth County?
El Paso Electric and Rio Grande Electric Cooperative report electric service in Hudspeth County, but those records do not identify the owner at every Acala address. We confirm the line owner before planning a conduit bore, then check conduit specifications with that owner and expose marked lines along the route.
Who controls Acala Road in Acala, and does a bore cut the street?
Acala is unincorporated and has no city government, so Acala Road is not controlled by a city. The county or state authority is relevant depending on the route. Directional boring can pass beneath pavement without cutting it; pits are placed in the ground on each side of the crossing.
What bore sizes and lengths can Trinity handle in Acala, Hudspeth County?
Trinity handles lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right size and length for an Acala route depend on the pipe, ground and crossings, such as Union Pacific track or Texas State Highway 20.
How much notice does Texas811 need for a bore near Soto Road in Acala?
For a bore near Soto Road, place the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request. Ask for worn or moved marks to be refreshed before work continues.
What affects the cost of a directional bore near Interstate 10 in Acala?
The route and scope determine the cost, with length, pipe size and Acala’s soil conditions among the factors. Marked utilities that need exposure, Interstate 10 or Union Pacific crossings, pavement, and drainage near Hudspeth Main Canal add work. Pits, excavator time, backfill and mobilization from Yukon also affect the job.
Where the Acala facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Acala
- U.S. Census Bureau, TIGER/Line 2024: Acala boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Acala population count
- Macrostrat geologic map compilation: map units under Acala
- U.S. Department of Transportation, North American Rail Network: track owners in Hudspeth County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hudspeth County
- U.S. Geological Survey, Elevation Point Query Service: Acala elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Acala
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Acala
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Acala, Texas
Type the address of your job in Acala. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Acala
Same county: Sierra Blanca · Dell City. All counties: Texas county list.
