trinityboringsolutions.com

Alton Texas Directional Boring: Hidalgo Soil, Highway 107, Mission Main Canal

Quick Answer: Alton is 704 road miles from our Yukon, Oklahoma main office, and work near Main Avenue is staffed by our crews or vetted partner crews. Along Texas State Highway 107, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Alton utility crossings. USDA mapping shows Hidalgo sandy clay loam, so we plan the bore for ground that can grip the pipe. That matters for service lines along Mile 6 Road and other streets.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Alton bores at a glance

  • Incorporated city in Hidalgo County, Texas. Population 22,907 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 704 miles, about 13.8 hours of driving.
  • Ground: Hidalgo soil is mapped on 57 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 107, FM 676, FM 494 and FM 492. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Mission Main Canal.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Main Avenue in Alton?

Alton is 704 road miles from our Yukon, Oklahoma main office, and work near Main Avenue is staffed by our crews or crews from vetted partner drilling contractors. The Census Bureau Vintage 2024 estimate puts Alton at 22,907 people in Hidalgo County. We install water, sewer, gas, electric conduit and fiber, including service lines routed beneath Alton streets where open trenching would disrupt access.

Our main office is in Yukon, Oklahoma, and Alton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965 and began directional boring in 1982. For a Main Avenue service, our work ranges from 3/4 inch lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Hidalgo soil affect a bore in Alton?

The USDA soil survey maps Hidalgo fine sandy loam across 31 percent of Alton and Hidalgo sandy clay loam across 21 percent. Brennan fine sandy loam covers 34 percent. At about 40 inches below the surface, clay loam is mapped under 59 percent of the city and sandy clay loam under 36 percent. For a Main Avenue bore, we account for the reported 27 percent average clay content at that depth when planning our work. These are mapped soil patterns, not test borings, so the exact ground along Main Avenue still needs to be checked as the bore is planned.

USDA soil survey, inside the Alton city limitsWhat is mapped
Soil series mappedHidalgo 57 percent, Brennan 34 percent and Pits (miscellaneous area) 3 percent
Texture at the surfacefine sandy loam 67 percent, sandy clay loam 28 percent and variable 3 percent
Texture about 40 inches downclay loam 59 percent, sandy clay loam 36 percent and variable 3 percent
Engineering class about 40 inches downlean clay (CL) 61 percent and clayey sand (SC) 34 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches4 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel5 percent of the area

Bedrock is not mapped within the top five feet across Alton, though that does not rule out rock at greater depth. A seasonal water table within 60 inches is mapped in 4 percent of the area, so pits may need pumping if a bore near Mission Main Canal encounters wet ground. When planning near Mission Main Canal, we account for the fact that flood prone soils are not mapped in Alton. High steel corrosion risk covers 5 percent of the area, which can affect casing or tracer wire choices. The geologic map shows Holocene stabilized sand dunes, where loose sand can cave behind the drill head.

How do crews handle Alton clay loam?

Alton soil mapping shows both fine sandy loam and clay loam at depth. We adjust the fluid and reaming plan to the ground along each route, whether the bore is near Main Avenue or Mission Main Canal.

  1. Hidalgo soil includes sandy clay loam, so we ream in stages and keep pipe ready before the final pass to limit the time an open hole sits.
  2. Where Alton’s mapped sand dunes meet a bore route, we use drilling fluid to support the hole and stage the reaming before pulling pipe.
  3. If a pit near Mission Main Canal reaches seasonal water, we plan compact pits and pumping so wet ground does not disrupt the setup.
  4. On routes near Main Avenue, we expose each marked utility with hydrovac before drilling close, then track the drill head and log depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line in Alton near Texas State Highway 107?

Texas State Highway 107 runs 4.5 mapped roadway miles inside Alton, while FM 676 accounts for 4.4 miles. FM 494 and FM 492 also run inside the limits. Texas State Highway 364 is 0.5 miles outside the city limits. A route along Main Avenue, which runs 4.43 miles in the city, may also involve Mile 6 Road at 3.93 miles or Saint Jude Avenue at 2.91 miles. These streets and highways help define where pits can fit and where a bore can avoid cutting pavement.

CrossingTypeMapped extentWho has a say
Texas State Highway 107State highway4.5 roadway miles insideState highway office
FM 676State highway4.4 roadway miles insideState highway office
FM 494State highway1 roadway miles insideState highway office
FM 492State highway0.1 roadway miles insideState highway office
Texas State Highway 364Highway nearby0.5 miles outsideState highway office
Mission Main CanalStream1.69 channel miles insideChecked for Corps of Engineers jurisdiction
Palm LakeLake or pond2 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Alton or within one mile outside its limits, so the mapped route does not show a track crossing. Mission Main Canal runs 1.69 channel miles through the city and has three mapped street crossings. Palm Lake is a 2 acre lake inside the limits. For a canal or lake route, we plan the bore path and check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Who approves a bore in Alton and Hidalgo County?

A bore beneath Texas State Highway 107 or another state highway, farm to market road, or ranch to market road needs a TxDOT utility permit for work in the right of way. For a Texas State Highway 107 crossing, we schedule around the TxDOT Pharr District review of our permit request. The utility that owns the line files through RULIS, while we prepare the bore plan and profile and work under that owner’s permit. TxDOT requires boring or tunneling under existing highway pavement, with casing and required cover. Alton is incorporated, so its city streets, including Main Avenue, belong to the city. A Mission Main Canal crossing is checked for federal jurisdiction during planning. No railroad is mapped in or near Alton.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are in the ground in Alton and Hidalgo County?

The water provider for the specific Alton address has to be confirmed with the city, the county or the local water district before a bore is planned. For electric service in Hidalgo County, AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report service. Those reports do not identify the owner at every address, so we confirm the line owner before planning an electric conduit bore near Saint Jude Avenue.

Line ownerWhat it isSourceSize
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric CooperativeElectric utilities reporting service in Hidalgo CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Alton’s median housing year at 2004; we plan underground work from site conditions. The estimates place 1 percent of homes before 1960, 38 percent from 1960 to 1999 and 61 percent in 2000 or later. Along Mile 6 Road, a replacement bore may meet older buried lines, while newer building areas can call for new services. We hydrovac pothole marked utilities on the route before drilling near them because surface marks show position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Alton and Palmhurst?

Alton is an incorporated city in Hidalgo County, covers 7.6 square miles and sits at an elevation of 161 feet. Its ZIP code is 78573. West Sharyland is 2.2 miles southwest, Palmhurst is 2.3 miles southeast, and La Homa is 3.0 miles west. Doffing is 4.7 miles west and Citrus City is 5.7 miles northwest. Mission, the nearest larger city, is 5.9 miles south; county seat Edinburg is 9.9 miles east. From our Yukon yard, the drive is 704 road miles and 13.8 hours, which affects mobilization for work near Texas State Highway 107.

Places near Alton

What boring work comes up in Alton near Saint Jude Avenue?

  • Highway crossing: A bore beneath Texas State Highway 107 keeps the roadway uncut and follows the cover and casing terms in the TxDOT permit.
  • Street service: A water or sewer service beneath Main Avenue can avoid an open cut across pavement and driveway access.
  • Fiber route: A fiber conduit along Saint Jude Avenue can pass beneath street pavement while pits sit off the traveled surface.
  • Canal crossing: A route beneath Mission Main Canal needs a planned profile and a jurisdiction check before the bore is laid out.
  • Lake side route: Work near Palm Lake calls for a route that places entry and exit pits outside the water crossing.
  • Electric conduit: Before a conduit bore near Mile 6 Road, we confirm the line owner and expose marked utilities along the path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore in Alton near Mission Main Canal?

Send the address or map pin first. The exact location matters near Mission Main Canal and Texas State Highway 107 because it shows which crossings and access points shape the route. We also need what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us work out where the bore pits and utility exposures fit.

The drive from Yukon is 704 road miles, so mobilization matters for an Alton job. Hidalgo sandy clay loam and the clay loam mapped below it affect drilling and reaming. Crossings of Texas State Highway 107 or Mission Main Canal can add planning and exposure work. Price also reflects the bore length and size, soil and rock, utilities crossed, pavement, pits, excavator time, sand backfill and any high profile or emergency work.

Questions people ask about boring in Alton

Does Trinity take directional boring jobs in Alton and Hidalgo County, and how are crews assigned?

Yes. We take directional boring work in Alton, and jobs near Main Avenue are handled by our own crews or by partner drilling contractors we have vetted. You work with Trinity through planning and the bore log, regardless of which crew is on site.

Can a line be bored beneath Mission Main Canal in Alton?

A bore can be planned beneath Mission Main Canal, which runs 1.69 channel miles through Alton. The route needs a profile that fits the ground and canal crossing, and planning checks whether the crossing is within U.S. Army Corps of Engineers jurisdiction.

Who owns electric lines in Alton and Hidalgo County, and who confirms conduit specs?

The specific owner must be confirmed for the Alton address before a conduit bore is planned. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County, but those reports do not establish which one serves a particular property.

Does the city or county control Saint Jude Avenue in Alton, and must it be cut?

Alton is incorporated, so Saint Jude Avenue is a city street. A directional bore can pass beneath pavement without cutting the street; pits are placed on either side of the crossing where access allows. The route still needs to account for marked utilities.

How old are Alton homes and buried lines near Mile 6 Road, and what does that mean for a replacement bore?

Alton’s median housing year is 2004 in the American Community Survey 2019 to 2023 estimates. Near Mile 6 Road, a replacement route may meet older buried utilities, so marked lines need exposure before drilling nearby. Newer homes can also require service bores.

What ground should I expect for an Alton bore in Hidalgo soil?

The USDA soil survey maps Hidalgo fine sandy loam and Hidalgo sandy clay loam in Alton. At about 40 inches below the surface, clay loam is mapped under 59 percent of the city. That ground can grip pipe, so the reaming and fluid plan should suit the route.

How far is Alton from the Yukon office, and does Mission affect the job?

Alton is 704 road miles from our Yukon, Oklahoma main office, with a drive of 13.8 hours. Mission is 5.9 miles south of Alton. The Yukon distance can affect mobilization, while the planned route near Mission or Texas State Highway 107 helps define the equipment and access needed.

How much 811 notice is needed for an Alton bore near Main Avenue, and what if marks move?

For a bore near Main Avenue, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If our Mile 6 Road start slips more than 14 days past the original notice, we submit a new request. Before we continue boring on Alton Boulevard, we have worn or moved marks refreshed through Texas811.

What affects the cost of directional boring in Alton near Texas State Highway 107?

The job details set the price, with the 704 road miles from Yukon affecting mobilization. Length, pipe or conduit size, Hidalgo soil, exposed utilities and pavement all matter. A crossing of Texas State Highway 107 or Mission Main Canal can add planning and access needs, as can pits, excavator time, sand backfill or emergency work.

Where the Alton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Alton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Alton, Texas

Type the address of your job in Alton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Alton

Same county: McAllen · Edinburg · Pharr · Weslaco · San Juan · Alamo · Mercedes · Donna · Palmview · Hidalgo · Murillo · Penitas. All counties: Texas county list.