trinityboringsolutions.com

Doffing Texas Directional Boring: Hidalgo Soil, FM 492 and Fine Sandy Loam

Quick Answer: Doffing is an unincorporated community, so its streets are not owned by a city; FM 492 is a state highway where we do directional boring, also called horizontal directional drilling (HDD). The Yukon main office is 710 road miles away, and Abram Road is one local route a bore may cross. Hidalgo soil is mapped as clay loam about 40 inches down, which can make the hole sticky and call for staged reaming. Street responsibility depends on whether a route is county or state maintained.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Doffing bores at a glance

  • Unincorporated community in Hidalgo County, Texas. Population 5,618 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 710 miles, about 14 hours of driving.
  • Ground: Hidalgo soil is mapped on 70 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 492, FM 676 and FM 1924. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring on Abram Road in Doffing?

Doffing is an unincorporated community in Hidalgo County, not a city with its own government. The Census Bureau counted 5,618 people here in 2020. Along Abram Road, Mile 5 Road or another local route, we install water, sewer, gas, electric conduit and fiber by directional boring, choosing a path that can pass below pavement and driveways without cutting across them.

Our main office is in Yukon, Oklahoma, and Doffing work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and our directional boring experience since 1982 helps us plan crossings near FM 492. For a Doffing run along FM 492 or Abram Road, we handle lines from 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Doffing and Hidalgo soil?

The USDA soil survey maps Hidalgo soil across 70 percent of Doffing and Brennan across 23 percent. Its leading map units are Hidalgo fine sandy loam at 60 percent and Brennan fine sandy loam at 15 percent. Fine sandy loam covers 94 percent of the mapped surface texture. About 40 inches down, clay loam accounts for 71 percent of mapped area, sandy clay loam for 25 percent and cemented material for 4 percent. Hidalgo, Brennan, and Cuevitas soil patterns are mapped references for Doffing, not test borings, so we verify conditions before planning. The clay loam can cling to a reamer, while sandy layers need support to keep the hole open.

USDA soil survey, inside the Doffing mapped community boundaryWhat is mapped
Soil series mappedHidalgo 70 percent, Brennan 23 percent and Cuevitas 4 percent
Texture at the surfacefine sandy loam 94 percent and sandy clay loam 5 percent
Texture about 40 inches downclay loam 71 percent, sandy clay loam 25 percent and cemented material 4 percent
Engineering class about 40 inches downlean clay (CL) 73 percent and clayey sand (SC) 23 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel1 percent of the area

With no bedrock mapped in Doffing’s top five feet, we still plan for deeper rock when boring in Hidalgo County. The USDA map instead shows the Lissie Formation of Pleistocene age, with clay, silt, sand, gravel and caliche, and Chibanian Alluvium with mixed carbonate, clay, sand and silt. Seasonal water table and flood prone soils each cover 1 percent of mapped area, so pits and fluid returns still need attention. High steel corrosion risk is mapped in 1 percent; the line owner should weigh casing and tracer wire materials, while HDPE does not share that steel concern.

How do we bore Doffing clay loam?

Doffing’s USDA map shows clay loam at about 40 inches and fine sandy loam at the surface. We adjust fluid and reaming to the ground, then track the drill head as it advances beneath local roads.

  1. Because Doffing maps clay loam at about 40 inches, we use thinner drilling fluid with polymer and ream in stages to limit sticky buildup.
  2. The mapped fine sandy loam surface can loosen behind the bit, so we support the hole and have the pipe ready before the final ream.
  3. At FM 492 or a paved local road, we keep the surface intact and control fluid pressure so the ground does not lift.
  4. Where a pit fits near Doffing’s mapped drainage, we keep it small and pump out water if the shallow seasonal table reaches it.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross near FM 492 in Doffing?

FM 492 runs 3.3 mapped roadway miles inside Doffing’s community boundary. FM 676 has 1.2 miles there, and FM 1924 has 0.4 miles. Texas State Highway 364, US 83 and Interstate 2 lie within 1.5 miles outside the boundary. Abram Road is the longest named local street at 2.91 miles, followed by Minnesota Road at 2.01 miles and Mile 5 Road at 1.99 miles. A bore route along these roads needs a specific crossing plan that accounts for pavement, access and the line being installed.

CrossingTypeMapped extentWho has a say
FM 492State highway3.3 roadway miles insideState highway office
FM 676State highway1.2 roadway miles insideState highway office
FM 1924State highway0.4 roadway miles insideState highway office
Texas State Highway 364Highway nearby1 miles outsideState highway office
US 83Highway nearby1.2 miles outsideState highway office
Interstate 2Highway nearby1.2 miles outsideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Doffing or within one mile outside its boundary, so a mapped rail crossing is not part of the local route inventory. No named streams or lakes and ponds are mapped nearby. The community does have 2.62 miles of unnamed drainage, which can affect where pits and a bore path fit. No mapped street crossings of named streams are recorded, but an actual creek or water crossing would need jurisdiction checked during planning.

Who approves a bore under FM 492 in Hidalgo County in Doffing?

Doffing has no city government, so local streets are not city owned; the county or state is responsible according to the road. For work in the FM 492 right of way, the utility owner, not the driller, applies through TxDOT’s RULIS system, and the TxDOT Pharr District reviews it. We prepare the bore plan and profile for the owner and work under its permit. At highway crossings, electric and communication lines need at least 60 inches of cover below the lowest crossed grade; water needs 60 inches and pressurized sewer needs 60 inches. The permit can set another depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines should we check in Doffing, Hidalgo County?

The water provider for the specific Doffing address has to be confirmed with the county or local water district before a bore is planned. Electric service reported in Hidalgo County includes AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative; the line owner for the address must be confirmed before an electric conduit bore. Along Abram Road, hydrovac potholing lets us check marked lines before drilling near them. Locate paint shows position, not depth.

Line ownerWhat it isSourceSize
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric CooperativeElectric utilities reporting service in Hidalgo CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Doffing’s median housing year is 1998 in the American Community Survey 2019 to 2023 five year estimates, so we verify underground routes before boring. None of the housing is mapped as built before 1960, while 58 percent dates from 1960 to 1999 and 42 percent from 2000 or later. A bore near Minnesota Road could serve a replacement line or a newer connection; the route and exposed utilities determine the plan. We pothole marked lines before the drill approaches them.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Do you cover Perezville and the Doffing area?

Doffing is in Hidalgo County, at an elevation of 191 feet, and covers 4.33 square miles within its mapped community boundary. ZIP code 78574 serves the area. La Homa is 1.7 miles east, Perezville is 2.5 miles southwest, and West Sharyland is 2.8 miles east. Edinburg, the county seat, is 14.6 miles east. The Yukon, Oklahoma main office is 710 road miles away, a 14.0 hour drive. That distance is part of planning mobilization for a bore on FM 492 or a local road.

Places near Doffing

What boring work comes up near Mile 5 Road in Doffing?

  • Highway crossing: A bore beneath FM 492 can carry water, sewer or conduit below pavement without cutting across the travel lanes.
  • Street service: A water or sewer run along Abram Road can pass beneath a driveway or road surface while keeping the crossing uncut.
  • Fiber route: Conduit along Mile 5 Road can connect a service while the bore path is checked for marked utilities.
  • Utility replacement: Near Minnesota Road, a bore can carry a replacement water line past existing surface improvements after utilities are exposed.
  • Drainage crossing: A route near Doffing’s unnamed drainage can be planned below the channel, with the crossing checked for federal jurisdiction.
  • Electric conduit: Near FM 676, we confirm the line owner and pothole marked utilities before the drill approaches the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore on Abram Road in Doffing?

Start with a map pin or address on Abram Road. The exact spot matters because a route near FM 492 can involve a state highway right of way, while a nearby local street may have a different road owner. For a Doffing crossing near Minnesota Road, what pipe or conduit size and footage should we plan for underground? A sketch or plans help us lay out the crossing.

A short route through Doffing’s fine sandy loam with no pavement or utility conflicts is simpler to plan than a bore under FM 492. Price factors include length, pipe size, soil, utilities to expose, concrete or pavement, drainage crossings, pits, excavator time and backfill. Because Doffing is 710 road miles from Yukon, we factor the distance into mobilization for work near FM 676. High profile or emergency work can add planning needs, and the site details determine the actual scope.

Questions people ask about boring in Doffing

Does Trinity take directional boring jobs in Doffing, Hidalgo County?

Yes. We take directional boring projects in Doffing and throughout Texas, including crossings planned along FM 1924 in Hidalgo County. Our main office is in Yukon, and work is handled with our own crews or from partner contractor satellite yards that Trinity has vetted. You work with Trinity through the bore log, whether a crew is working near Abram Road or another local route.

Who is responsible for Mile 5 Road in Doffing, and does it need to be cut?

Doffing has no city government, so the county or state is responsible for streets according to road ownership. Mile 5 Road is a local named street, while FM 492 is a state highway. Directional boring can pass beneath a road surface without an open cut, subject to the route and any required permit.

Do older buried lines near Minnesota Road in Doffing affect replacement bores?

They can. The American Community Survey 2019 to 2023 estimates put the median housing year at 1998, with 58 percent of homes built from 1960 to 1999 and 42 percent in 2000 or later. A replacement bore near Minnesota Road needs marked utilities exposed before drilling near them, since paint shows position but not depth.

What ground does a bore pass through in Doffing Hidalgo soil?

The USDA soil survey maps Hidalgo soil across 70 percent of Doffing. About 40 inches below the surface, clay loam covers 71 percent of mapped area. That ground can stick to the reamer, so we may use staged reaming and manage the drilling fluid. Survey maps describe patterns, not the conditions at each address.

Will a directional bore hit rock in Doffing?

Bedrock is not mapped in Doffing’s top five feet, but deeper rock is not ruled out. The geologic map shows the Lissie Formation and Chibanian Alluvium, which include clay, silt, sand, gravel and caliche. A bore near FM 676 still needs a route planned for the ground encountered at the site.

Who approves a bore under FM 492 in Doffing?

The utility owner applies for work in the FM 492 right of way through TxDOT’s RULIS system; the TxDOT Pharr District reviews the application. We prepare the bore plan and profile for the owner and work under its permit. A crossing permit sets the applicable cover depth for the line.

How much notice does Texas811 need for a bore near Abram Road in Doffing?

Texas law requires the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If work on Abram Road moves more than 14 days past the original notice, make a new request. If marks near Abram Road are worn or moved, we coordinate refreshed markings through Texas811 before boring continues.

How far is Doffing from Yukon, and does La Homa affect the job?

Doffing is 710 road miles and a 14.0 hour drive from the Yukon main office. La Homa is 1.7 miles east of Doffing, but that nearby location does not change the route’s soil, access or utility checks. The distance from Yukon is considered when planning mobilization for work near La Homa or elsewhere in Doffing.

What affects the cost of a directional bore near FM 492 in Doffing?

The route, footage, pipe or conduit size, Doffing’s soil, pavement, utility crossings, pits and drainage affect the work. A bore under FM 492 has highway permit and cover requirements to plan for. Our mobilization planning accounts for Doffing’s 710 road miles from Yukon and permit coordination with TxDOT Pharr District. These job details, rather than a single rate, determine the scope.

Where the Doffing facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Doffing

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Doffing, Texas

Type the address of your job in Doffing. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Doffing

Same county: McAllen · Edinburg · Mission · Pharr · Weslaco · San Juan · Alton · Alamo · Mercedes · Donna · Hidalgo · Murillo. All counties: Texas county list.