Donna Texas Directional Boring: Hidalgo Sandy Clay Loam, Interstate 2 and La Cruz Resaca
Quick Answer: Can we bore beneath a road, track or creek in Donna without cutting the surface? Yes, we use directional boring, also called horizontal directional drilling (HDD), for crossings such as Interstate 2 in Donna. The Yukon, Oklahoma main office is 710 road miles away, and Salinas Boulevard is one local route we plan around. Hidalgo sandy clay loam is common here, while clay loam is mapped below; sticky ground can grip pipe. For a La Cruz Resaca crossing, we plan the bore around the channel.
Donna bores at a glance
- Incorporated city in Hidalgo County, Texas. Population 16,876 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 710 miles, about 13.9 hours of driving.
- Ground: Hidalgo soil is mapped on 65 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 2, US 83 Business, US 83, US 281 and FM 493. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: Rio Valley Switching Company, with 16 mapped street and rail crossings.
- Named streams inside the boundary: La Cruz Resaca and Donna Main Canal.
- Public water: City of Donna, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring on Salinas Boulevard in Donna?
We take directional boring work in Donna, Hidalgo County, for water, sewer, gas, electric conduit and fiber lines. The Census Bureau Vintage 2024 estimate puts the city population at 16,876. A bore could carry a water service beneath Salinas Boulevard or place fiber conduit alongside North Avenue, depending on the route and the line owner’s plans.
Our main office is in Yukon, Oklahoma, and Donna work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet under the Arkansas River in Tulsa. A typical Donna job, such as a service crossing near Salinas Boulevard, is much shorter. We have been a family business since 1965 and have done directional boring since 1982.

What does the USDA soil survey show under Donna and its Hidalgo soil?
The USDA soil survey maps Hidalgo soil across 65 percent of Donna, with Harlingen soil at 24 percent. The mapped surface is mostly sandy clay loam, at 63 percent, while clay accounts for 25 percent. About 40 inches below the surface, clay loam is mapped across 68 percent of the area and clay across 25 percent. These are mapped patterns, not test borings at a proposed route. Clay can hold an open hole, but it can also stick to the reamer and grip the pipe during pullback.
| USDA soil survey, inside the Donna city limits | What is mapped |
|---|---|
| Soil series mapped | Hidalgo 65 percent, Harlingen 24 percent, Runn 3 percent and Raymondville 3 percent |
| Texture at the surface | sandy clay loam 63 percent, clay 25 percent and silty clay 3 percent |
| Texture about 40 inches down | clay loam 68 percent, clay 25 percent and silty clay 3 percent |
| Engineering class about 40 inches down | lean clay (CL) 68 percent and fat clay (CH) 28 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 31 percent of the area |
| Mapped as urban land (disturbed fill) | 1 percent of the area |
Bedrock is not mapped in the top five feet of Donna, though deeper rock is not ruled out. A seasonal water table within 40 inches is mapped in 1 percent of the area, so pits may need pumping at a wet site. Because flood prone soils are not mapped in Donna, we plan boring around that mapping gap. High steel corrosion risk covers 31 percent of the mapped area, which makes casing and tracer wire materials worth reviewing with the line owner. The geologic map shows stabilized sand dunes of Holocene age; their permeable sand can behave differently from the clay soils nearby.
How do crews bore Donna’s clay loam ground?
Donna’s mapped clay loam can cling to tooling and pipe, while the stabilized sand dunes may take fluid differently. We adjust the drilling plan to the ground at the crossing, including the route near Salinas Boulevard.
- For Donna’s clay loam, we use a thinner drilling fluid with polymer and ream in stages to limit sticky cuttings that can grip the pipe.
- Where Harlingen clay or Hidalgo sandy clay loam is mapped, we watch fluid returns and keep pressure controlled near pavement to avoid lifting it.
- At a Donna site in the stabilized sand dunes, we build support with drilling fluid, open the hole in stages and have pipe ready for pullback.
- The mapped seasonal water table near 1 percent of Donna’s area can affect pits, so we keep them small and pump water when needed.

Which roads, tracks or creeks could a Donna bore cross near Interstate 2?
Interstate 2, US 83 Business, US 83, US 281 and FM 493 run within Donna’s limits; Texas State Highway 495 is 0.8 miles outside them. Salinas Boulevard runs 6.35 miles in the city, while Hooks Avenue and North Avenue are also long local routes. A bore beneath existing highway pavement uses boring or tunneling rather than an open cut. For a highway crossing, the bore plan has to account for the traveled lanes and the required cover set for the utility type.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 2 | Interstate | 6.2 roadway miles inside | State highway office |
| US 83 Business | US highway | 6.7 roadway miles inside | State highway office |
| US 83 | US highway | 6.2 roadway miles inside | State highway office |
| US 281 | US highway | 1.2 roadway miles inside | State highway office |
| FM 493 | State highway | 17.5 roadway miles inside | State highway office |
| Spur 433 | State highway | 0.8 roadway miles inside | State highway office |
| FM 1423 | State highway | 0.6 roadway miles inside | State highway office |
| Texas State Highway 495 | Highway nearby | 0.8 miles outside | State highway office |
| Rio Valley Switching Company | Railroad | 3.92 track miles inside | The railroad |
| La Cruz Resaca | Stream | 1.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Donna Main Canal | Stream | 0.55 channel miles inside | Checked for Corps of Engineers jurisdiction |
| El Gato Drain | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| Donna Reservoirs | Lake or pond | 234 acres, nearby | Checked for Corps of Engineers jurisdiction |
| City Reservoir | Lake or pond | 7 acres, inside | Checked for Corps of Engineers jurisdiction |
Rio Valley Switching Company owns 3.92 track miles in Donna, and public mapping shows 16 street and rail crossings. The rail owner’s agreement governs a track crossing. La Cruz Resaca has 1.05 channel miles in the city, and Donna Main Canal has 0.55; five street crossings of named streams are mapped. City Reservoir is inside city limits, and Donna Reservoirs are within one mile outside them. A creek or lake route needs a check for federal waterway jurisdiction during planning.
Who approves a Donna bore in Hidalgo County?
For a bore on Salinas Boulevard or North Avenue, Donna’s city streets are under city control because Donna is incorporated. Interstate 2, US 83 and FM 493 are state routes; work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Pharr District. The utility owner, not the drilling contractor, submits through TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. A Rio Valley Switching Company track crossing needs the railroad’s agreement. A route at La Cruz Resaca is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Donna system?
The City of Donna public water system uses surface water and reports 6,240 service connections serving 18,720 people. A proposed water bore near Salinas Boulevard still needs its route checked against marked utilities. Electric service reported in Hidalgo County includes AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative. We confirm which company owns the line at the specific location before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Donna | Public water system | Surface water | 6,240 connections, 18,720 people served |
| AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative | Electric utilities reporting service in Hidalgo County | EIA Form 861 | Confirm the line owner by address |
Donna’s American Community Survey 2019 to 2023 five year estimates place the median housing year at 1988, a local age context for underground work. For underground work in Donna, the survey estimates 11 percent of homes were built before 1960, 61 percent from 1960 to 1999 and 28 percent in 2000 or later. Along North Avenue, a project might replace older pipe or serve newer construction; the age figures alone do not show what is buried at a lot. We use hydrovac potholing to expose marked lines before drilling near them, since paint shows position, not depth.

How far is Donna from Weslaco and our Yukon yard?
Donna is in Hidalgo County, Texas, at an elevation of 87 feet and covers 8.29 square miles. Its ZIP code is 78537. Midway South is 1.1 miles east, Scissors is 2.0 miles south and Midway North is 2.2 miles northeast. Weslaco, the nearest larger city, is 3.2 miles east; Edinburg, the county seat, is 13.0 miles northwest. From our Yukon, Oklahoma main office, the road distance is 710 miles and the drive is 13.9 hours, which can affect mobilization for a Donna job.
Places near Donna
- Midway South: 1.1 miles east
- Scissors: 2 miles south
- Directional boring in Midway North: 2.2 miles northeast
- Directional boring in Weslaco: 3.2 miles east
- Villa Verde: 3.4 miles southeast
Which jobs call for a bore near La Cruz Resaca in Donna?
- Highway crossing: A bore under Interstate 2 keeps the route beneath pavement and travel lanes rather than cutting through the roadway.
- Street service: A water or sewer line can pass beneath Salinas Boulevard, with marked utilities exposed before the drill approaches them.
- Creek crossing: A route beneath La Cruz Resaca needs depth planning around the channel and a jurisdiction check during planning.
- Rail crossing: A bore beneath Rio Valley Switching Company track needs the railroad’s agreement for the crossing details and work access.
- Fiber conduit: A conduit route near North Avenue can avoid an open cut across pavement, with the line owner’s route and markings checked first.
- Water connection: Work tied to the City of Donna system can use a bore to cross a street without opening the paved surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Donna job near Rio Valley Switching Company?
For a Donna quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us see the route. If the line is near Rio Valley Switching Company’s track or La Cruz Resaca, include that crossing in the description so we can consider its location and access.
The job scope sets the price, not footage alone. Ground conditions matter: Donna’s mapped clay loam can cling to the reamer, while the local sand dunes may need a different fluid plan. Crossings matter too, including Interstate 2, Rio Valley Switching Company track and drainage at La Cruz Resaca. Pipe size, exposed utilities, pavement, pits, backfill, excavator time and emergency timing also affect the work. Mobilization reflects the 710 road miles from Yukon.
Questions people ask about boring in Donna
Does Trinity Boring Solutions take directional boring jobs in Donna, Hidalgo County?
Yes. We take directional boring work in Donna and across Texas, keeping the City of Donna’s surface water system in mind when planning utility work. The job is handled by our own crews or from satellite yards run by drilling partners we have vetted, depending on the work. You deal with Trinity from the first call through the bore log, including for a route near Salinas Boulevard.
What does a bore under Rio Valley Switching Company track in Donna require?
A crossing needs an agreement from Rio Valley Switching Company, which owns 3.92 track miles in Donna. The railroad sets the crossing conditions, including casing, depth and flagging. If the route also occupies highway right of way, TxDOT asks for a copy of the railroad agreement with the permit materials.
Can you bore a line under La Cruz Resaca in Donna?
Yes, a bore can be planned beneath La Cruz Resaca, which has 1.05 channel miles in Donna. The route needs to stay under the channel, and planning checks whether the crossing is under U.S. Army Corps of Engineers jurisdiction. The site conditions and required depth depend on the actual alignment.
For boring in Donna, is the public water system owned by the City of Donna and supplied by surface water?
The City of Donna owns the public water system and uses surface water, a local utility fact we consider when planning underground work. It reports 6,240 service connections and serves 18,720 people. For a bore near Salinas Boulevard, the specific water line and other marked utilities still need to be located along the proposed path.
Which electric utilities report service in Hidalgo County for a Donna conduit bore?
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. That county information does not identify the provider at every Donna address. We confirm the line owner for the proposed location before planning a conduit bore or checking its specifications.
Who controls North Avenue in Donna, and can a line go under it without cutting the street?
Donna is an incorporated city, so North Avenue is a city street. Directional boring can place a line beneath it without an open cut through the pavement, subject to the route, access and marked utilities. We expose marked lines near the bore path before drilling toward them.
How much notice does Texas811 need for a Donna bore near Salinas Boulevard?
For a bore near Salinas Boulevard, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days beforehand. For Donna projects, we submit a new request if the start slips more than 14 days past the original notice. Worn or moved marks need refreshing through Texas811 before work continues.
Does the 710 road miles to Donna from Yukon change a job near Weslaco?
Donna is 710 road miles from our Yukon, Oklahoma main office, and Weslaco is 3.2 miles east of Donna. The distance from Yukon can affect mobilization and planning for the crew and equipment. The bore route, such as a crossing near Interstate 2, also shapes the work.
What affects the cost of a directional bore under Interstate 2 in Donna?
The price depends on the route and scope, not one factor. Pipe size and length matter, as do Donna’s clay loam, pavement, marked utilities and the required highway crossing plan. A route near Rio Valley Switching Company track or La Cruz Resaca adds crossing considerations, while mobilization from Yukon is affected by the 710 road miles.
Where the Donna facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Donna
- U.S. Census Bureau, TIGER/Line 2024: Donna boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Donna
- U.S. Census Bureau, American Community Survey 2019 to 2023: Donna housing units and year built
- Macrostrat geologic map compilation: map units under Donna
- U.S. EPA Safe Drinking Water Information System: public water systems serving Donna
- U.S. Department of Transportation, North American Rail Network: track owners in Hidalgo County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hidalgo County
- U.S. Geological Survey, Elevation Point Query Service: Donna elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Donna
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Donna
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Donna, Texas
Type the address of your job in Donna. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
