trinityboringsolutions.com

Mission Texas Directional Boring: Hidalgo Soil, Mission Main Canal, Rio Valley Tracks

Quick Answer: Mission is an incorporated city in Hidalgo County, so city streets such as Conway Avenue belong to the city; we do directional boring, also called horizontal directional drilling (HDD), for routes under Mission Main Canal. The Yukon, Oklahoma main office is 709 road miles away, a factor for work near Interstate 2. Hidalgo soil is commonly clay loam at about 40 inches, so sticky ground can build up on a reamer and grip pipe. We adjust the drilling fluid and ream in stages before pulling pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Mission bores at a glance

  • Incorporated city in Hidalgo County, Texas. Population 88,574 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 709 miles, about 13.8 hours of driving.
  • Ground: Hidalgo soil is mapped on 51 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 2, US 83, US 83 Business, FM 494 and FM 396. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: Rio Valley Switching Company and Border Pacific Railroad, with 52 mapped street and rail crossings.
  • Named streams inside the boundary: Mission Main Canal, Edinburg Main Canal, Mission Branch Pilot Channel and Mission Main Canal Branch.
  • Public water: City of Mission, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for boring under Mission Main Canal in Mission?

Mission is an incorporated city in Hidalgo County, with a population of 88,574 in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber lines, including routes beneath Conway Avenue or between properties along Mission Main Canal. Trinity Boring Solutions serves Texas, and we handle the work from the first call through the bore log.

Our main office is in Yukon, Oklahoma, and Mission work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982. For a Mission Main Canal route, our equipment can handle 3/4 inch service lines through 48 inch casing and bores from 10 feet to 5,000 feet.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should I expect for a bore in Mission near Hidalgo soil?

The USDA soil survey maps Hidalgo soil series across 51 percent of Mission, with Runn on 20 percent and Reynosa on 10 percent. At about 40 inches below the surface, clay loam covers 52 percent of the mapped area, and silty clay another 20 percent. At that depth, we account for average clay content of 35 percent when planning underground work. These are mapped soil patterns, not test borings, so the route still matters. Clay loam can hold an open hole, but it may stick to the reamer and swell against pipe as a bore advances.

USDA soil survey, inside the Mission city limitsWhat is mapped
Soil series mappedHidalgo 51 percent, Runn 20 percent, Reynosa 10 percent, Harlingen 5 percent and Brennan 3 percent
Texture at the surfacesandy clay loam 42 percent, silty clay 23 percent and fine sandy loam 12 percent
Texture about 40 inches downclay loam 52 percent, silty clay 20 percent and silty clay loam 11 percent
Engineering class about 40 inches downlean clay (CL) 66 percent, fat clay (CH) 27 percent and clayey sand (SC) 3 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches5 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel33 percent of the area
Mapped as urban land (disturbed fill)1 percent of the area

For Mission, bedrock is not mapped within 60 inches, which does not establish what lies deeper. The USDA soil survey maps a seasonal water table within 60 inches across 5 percent of the area and flood prone soils across 3 percent, so pits and drainage crossings need a site specific plan. High steel corrosion risk is mapped across 33 percent; the line owner should weigh casing and tracer wire materials, while HDPE is not affected by that soil concern. The mapped Beaumont Formation, clay and mud, is Cenozoic and consists mainly of low permeability mud and clay, so returns and pressure need attention.

How do we bore Mission clay loam along local routes?

The mapped clay loam around Mission can stay open but stick to tooling. Near Mission Main Canal, we match fluid and reaming stages to the ground, then track the drill head as the bore progresses.

  1. Fluid and reaming: Hidalgo clay loam can stick to a reamer, so we use suitable fluid and open the hole in stages before pulling pipe.
  2. Pressure control: With mapped heavy clay in Mission, we watch fluid returns near pavement to avoid pressure lifting the surface.
  3. Utility exposure: Before drilling near a marked line on Shary Road, we hydrovac pothole it because locate paint does not show depth.
  4. Tracking: Along a route near Mission Main Canal, a walkover locator follows the drill head while we record depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross on Military Road in Mission?

Mission has Interstate 2 and US 83 running through the city, with 10.9 mapped roadway miles of each. FM 494 and FM 396 each account for 8.7 miles, and Texas State Highway 107 adds 6.9 miles. These named roads can put a utility route in state right of way, where the bore needs to follow the applicable TxDOT permit. Military Road is the longest named street at 6.52 miles in the city, followed closely by Conway Avenue at 6.51 miles and Shary Road at 6.48 miles. Those city streets can be bored beneath rather than cut.

CrossingTypeMapped extentWho has a say
Interstate 2Interstate10.9 roadway miles insideState highway office
US 83US highway10.9 roadway miles insideState highway office
US 83 BusinessUS highway7.4 roadway miles insideState highway office
FM 494State highway8.7 roadway miles insideState highway office
FM 396State highway8.7 roadway miles insideState highway office
Texas State Highway 107State highway6.9 roadway miles insideState highway office
Texas State Highway 495State highway5.1 roadway miles insideState highway office
FM 1016State highway3.1 roadway miles insideState highway office
FM 2062State highway1.7 roadway miles insideState highway office
FM 1924State highway1.6 roadway miles insideState highway office
FM 1427State highway0.7 roadway miles insideState highway office
Texas State Highway 364State highway0.2 roadway miles insideState highway office
Rio Valley Switching CompanyRailroad10.07 track miles insideThe railroad
Border Pacific RailroadRailroad2.1 track miles insideThe railroad
Swipe the table sideways to see every column.

Rio Valley Switching Company has 10.07 track miles in Mission, and Border Pacific Railroad has 2.1. Public mapping records 52 street and rail crossings in the city, so a proposed route needs to identify the track owner before plans are set. Mission Main Canal runs 8.47 channel miles, while Edinburg Main Canal runs 5.58; mapped street crossings of named streams total 36. The route can also be affected by the Río Grande and City Reservoir, both within city limits, so a water crossing needs review during planning.

Who has to sign off on Mission work near Rio Valley Switching Company?

For work in the right of way of Interstate 2, US 83, FM 494 or another state road in Mission, TxDOT utility permitting applies. The TxDOT Pharr District reviews the application, and the utility owner files it in the online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT rules call for boring or tunneling below existing highway pavement, with crossings encased and rural highway bores extending under all travel lanes. A crossing of Rio Valley Switching Company track needs that railroad’s agreement, which sets the crossing details. Mission Main Canal or another water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should I locate before a bore in Hidalgo County near Mission?

The City of Mission owns the public water system, which uses surface water and reports 29,994 service connections serving 77,058 people. Near Mission Main Canal, the system’s buried water lines are among the utilities to locate before setting a route. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. We confirm the line owner for the specific address before planning an electric conduit bore, since the countywide list does not identify the provider at every Mission property.

Line ownerWhat it isSourceSize
City of MissionPublic water systemSurface water29,994 connections, 77,058 people served
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric CooperativeElectric utilities reporting service in Hidalgo CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We treat Mission’s median housing year of 2000, from the American Community Survey 2019 to 2023 five year estimates, as context for underground work. The estimates place 3 percent of housing units before 1960, 47 percent from 1960 to 1999 and 50 percent in 2000 or later. A replacement bore near Conway Avenue may meet older buried lines, while newer development can call for new service runs. We hydrovac pothole every marked utility on the planned path before drilling near it; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Mission in relation to Palmview South and our Yukon yard?

Mission is in Hidalgo County, where Edinburg is the county seat, and the city sits at an elevation of 115 feet across 36.33 square miles. The ZIP codes are 78572, 78574 and 78573. Palmview South is 3.3 miles west, Palmview is 4.0 miles northwest, and Palmhurst is 4.2 miles northeast. Edinburg is 13.3 miles northeast. The Yukon, Oklahoma yard is 709 road miles from Mission, a 13.8 hour drive, which can affect mobilization for work near Glasscock Road or Interstate 2.

Places near Mission

What kinds of bores come up near Mission Main Canal?

  • Highway crossing: A bore beneath Interstate 2 needs a route and casing plan that follows TxDOT requirements for the existing highway.
  • Water service: A connection near the City of Mission water system can be routed under Conway Avenue without cutting the street.
  • Canal crossing: A route under Mission Main Canal calls for planning around the channel and checking for federal waterway jurisdiction.
  • Rail crossing: A bore beneath Rio Valley Switching Company track requires an agreement with the railroad that owns the line.
  • Fiber conduit: A fiber run along Military Road can pass below the street while marked utilities are exposed before drilling near them.
  • Drainage crossing: A route near the Río Grande or City Reservoir needs a site specific plan for the water crossing.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Mission bore near Interstate 2?

For Mission directional boring quotes, send us the address or map pin, what will go in the ground, pipe or conduit size, and footage; sketches or plans help. The route matters, especially if it approaches Mission Main Canal, a railroad track or Interstate 2, because each can change access and crossing requirements.

The main cost drivers are bore length and pipe or conduit size, followed by ground conditions and the utilities that need to be crossed and exposed. Hidalgo clay loam can require staged reaming, while pavement along Interstate 2 affects the crossing plan. A route near Rio Valley Switching Company track adds railroad coordination, and a Mission Main Canal crossing can involve waterway review. Pits, excavator time, sand backfill, concrete, emergency scheduling and mobilization from Yukon also shape the job price.

Questions people ask about boring in Mission

Does Trinity Boring Solutions take directional boring work in Hidalgo County near Mission, and how is it staffed?

Yes. Trinity Boring Solutions takes directional boring work in Mission and across Texas. Our main office is in Yukon, Oklahoma; our own crews and vetted partner contractor satellite yards handle the field work. You work with Trinity through the bore log, whichever crew is on site, for a route near Conway Avenue or elsewhere in Hidalgo County.

Can you bore a line under Mission Main Canal in Mission?

A bore under Mission Main Canal can be planned, subject to the crossing route and site conditions. The canal runs 8.47 channel miles in Mission, and a water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We need the proposed route and line details to assess the crossing.

Who runs Mission’s public water system, and where does its water come from?

The City of Mission owns the public water system, and its source is surface water. The system reports 29,994 service connections and 77,058 people served. If a bore near Mission Main Canal could meet a water line, we locate and expose the marked utility before drilling close to it.

Which electric utilities report service in Hidalgo County near Mission, and who confirms conduit specifications?

AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. That county list does not identify the provider at each Mission address, so the line owner must be confirmed before conduit specifications are planned. A proposed run near Shary Road still needs address specific utility coordination.

Who controls Mission streets like Shary Road, and does a bore require cutting one?

Mission is incorporated, so its city streets, including Shary Road, belong to the city. Directional boring can place a line beneath a street without opening the roadway, subject to the route and any applicable approvals. We expose marked utilities on the bore path before drilling near them.

How old are buried lines near Conway Avenue in Mission, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates give Mission a median housing year of 2000, with 3 percent of units built before 1960. Housing age does not establish the age of a particular buried line. A replacement route near Conway Avenue needs current utility locates and potholing before the drill approaches marked lines.

What bore sizes and lengths can Trinity handle near Glasscock Road in Mission?

We handle lines from 3/4 inch service size through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Glasscock Road still depends on the route, ground and crossings. Send the pipe or conduit size and footage so we can assess the proposed scope.

How much notice does Texas811 need before a bore on Military Road in Mission, and what if marks move?

For a bore on Military Road, request locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed before work continues.

What affects the cost of directional boring near Interstate 2 in Mission?

The price depends on the job scope, not a single rate. Length, pipe or conduit size, Hidalgo clay loam, the number of utilities to expose, pavement and the Interstate 2 crossing plan all matter. A Mission Main Canal or railroad crossing can add planning needs, and mobilization from the Yukon yard is affected by the 709 road miles.

Where the Mission facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Mission

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Mission, Texas

Type the address of your job in Mission. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Mission

Same county: McAllen · Edinburg · Pharr · Weslaco · San Juan · Alton · Alamo · Mercedes · Donna · Hidalgo · La Homa · Murillo. All counties: Texas county list.