Palmview Texas Directional Boring: Hidalgo Soil, Interstate 2 and Edinburg Main Canal
Quick Answer: Hidalgo sandy clay loam holds a bore open, but sticky cuttings can cling to the reamer. We handle directional boring, also called horizontal directional drilling (HDD), in Palmview, Texas, including routes beneath Border Pacific Railroad tracks. Our Yukon, Oklahoma main office is 715 road miles away, and Goodwin Road is one of Palmview’s long street corridors. Staged reaming and a same day pull can help manage the clay.
Palmview bores at a glance
- Incorporated city in Hidalgo County, Texas. Population 16,030 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 715 miles, about 13.9 hours of driving.
- Ground: Hidalgo soil is mapped on 73 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 2, US 83, FM 492, Texas State Highway 364 and FM 1427. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: Border Pacific Railroad, with 10 mapped street and rail crossings.
- Named streams inside the boundary: Edinburg Main Canal.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Goodwin Road in Palmview?
We take directional boring work in Palmview, Hidalgo County, where the Census Bureau Vintage 2024 estimate puts the population at 16,030. On streets such as Goodwin Road and Abram Road, our crews install water, sewer, gas, electric conduit and fiber lines by bore, with the route set to fit the line and the site.
Our main office is in Yukon, Oklahoma, and Palmview work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Directional boring has been part of our work since 1982. Four decades of boring helps us plan for the sticky Hidalgo soil and the crossings along Goodwin Road.

What kind of ground does a Palmview bore meet in Hidalgo soil?
The USDA soil survey maps Hidalgo soil across 73 percent of Palmview. At the surface, fine sandy loam covers 50 percent of the mapped area and sandy clay loam covers 40 percent. About 40 inches down, clay loam is mapped under 74 percent of the area, while sandy clay loam accounts for 17 percent. Average clay content at that depth is 31 percent. For Palmview crossings, we treat these mapped patterns as planning context, not test borings for final boring design. Clay loam can hold the hole open, but sticky material may ball up on the reamer and grip the pipe.
| USDA soil survey, inside the Palmview city limits | What is mapped |
|---|---|
| Soil series mapped | Hidalgo 73 percent, Brennan 9 percent, McAllen 5 percent and Runn 5 percent |
| Texture at the surface | fine sandy loam 50 percent, sandy clay loam 40 percent and silty clay 5 percent |
| Texture about 40 inches down | clay loam 74 percent, sandy clay loam 17 percent and silty clay 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 82 percent, clayey sand (SC) 9 percent and fat clay (CH) 7 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 2 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 14 percent of the area |
Bedrock is not mapped in the top five feet of Palmview, though deeper rock is not ruled out. Seasonal water table conditions are mapped within 60 inches in 2 percent of the area, and flood prone soils in 2 percent. High steel corrosion risk is mapped in 14 percent, so the line owner should consider casing and tracer wire materials. The USDA geologic map includes the Pleistocene Lissie Formation, with clay, silt, sand, gravel and caliche, and alluvium. Clay calls for staged reaming and controlled fluid returns.
How do crews handle Palmview clay loam?
Palmview’s mapped clay loam can stay open yet stick to the tooling. Along routes such as Goodwin Road, we plan the fluid, reaming sequence and utility checks around the ground and the crossings.
- Hidalgo clay loam can cling to the reamer, so we use staged reaming and plan to pull the pipe the same day the hole is opened.
- Where Palmview’s fine sandy loam gives way to clay loam, we adjust fluid use to keep the hole stable without overworking the ground.
- Before the drill approaches marked utilities near Goodwin Road, we hydrovac pothole them because surface paint does not show their depth.
- We track the drill head from the surface and log depth and pitch, with Edinburg Main Canal crossings planned around channel conditions.

Which roads, tracks or creeks could a Palmview bore cross near Border Pacific Railroad?
Interstate 2 and US 83 each have 5.9 mapped roadway miles inside Palmview. FM 492 adds 2.8 miles, while Texas State Highway 364, FM 1427, FM 2062 and Texas State Highway 495 also run within the limits. US 83 Business is 1.3 miles outside the city limits. Goodwin Road is the longest named street at 4.32 miles in the city; Abram Road and Bentsen Palm Drive add other substantial routes. A bore can keep pavement and driveways uncut, subject to the route and approvals.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 2 | Interstate | 5.9 roadway miles inside | State highway office |
| US 83 | US highway | 5.9 roadway miles inside | State highway office |
| FM 492 | State highway | 2.8 roadway miles inside | State highway office |
| Texas State Highway 364 | State highway | 1.1 roadway miles inside | State highway office |
| FM 1427 | State highway | 0.9 roadway miles inside | State highway office |
| FM 2062 | State highway | 0.8 roadway miles inside | State highway office |
| Texas State Highway 495 | State highway | 0.5 roadway miles inside | State highway office |
| US 83 Business | Highway nearby | 1.3 miles outside | State highway office |
| Border Pacific Railroad | Railroad | 2.66 track miles inside | The railroad |
| Edinburg Main Canal | Stream | 3.86 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mission Main Canal | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Edinburg Settling Basin | Lake or pond | 17 acres, nearby | Checked for Corps of Engineers jurisdiction |
Border Pacific Railroad has 2.66 track miles in Palmview, and public mapping shows 10 street and rail crossings in the city. Edinburg Main Canal runs 3.86 channel miles inside the limits, with 7 mapped street crossings of named streams. The Mission Main Canal is 0.9 miles outside the city limits. The 17 acre Edinburg Settling Basin is also within a mile, outside Palmview. Track and channel locations affect bore alignment, access and crossing review.
Who has to sign off on a Palmview bore near Interstate 2?
For work in the Interstate 2 right of way, the line owner files the utility permit in TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. TxDOT’s Pharr District reviews it. TxDOT cover rules call for at least 60 inches for electric and communication lines crossing a highway, and at least 48 inches for those running along the right of way. Water lines need 60 inches at crossings and 36 inches along the right of way; pressurized sewer crossings need 60 inches. A Border Pacific Railroad crossing requires an agreement with the railroad, which sets crossing conditions. Edinburg Main Canal planning includes checking for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Hidalgo County near Palmview?
The water provider for a specific Palmview address must be confirmed with the city, county or local water district before a bore is planned; available EPA drinking water records do not tie a system to this town. For electric service in Hidalgo County, AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report to the EIA. We confirm the line owner for the address before planning conduit, including along routes such as Veterans Boulevard.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative | Electric utilities reporting service in Hidalgo County | EIA Form 861 | Confirm the line owner by address |
Using the American Community Survey 2019 to 2023 five year estimates, we consider Palmview’s 1995 median housing year when planning underground work. The estimates place 1 percent of housing before 1960, 67 percent from 1960 to 1999 and 32 percent in 2000 or later. That mix can mean either replacement lines or new services along Abram Road. Before drilling near marked utilities, we hydrovac pothole them; paint shows position, not depth. This check matters around both water lines and electric facilities.

Where is Palmview in relation to Mission?
Palmview is an incorporated city in Hidalgo County, at an elevation of 142 feet and covering 7.58 square miles. Across Palmview ZIP codes 78572 and 78574, we use the listed locations to frame underground boring plans. Perezville is 1.6 miles northwest, Palmview South is 1.7 miles south, Abram is 2.3 miles southwest, Doffing is 3.2 miles north and La Homa is 3.6 miles northeast. Mission, the nearest larger city, is 4.0 miles southeast; Edinburg, the county seat, is 15.3 miles northeast. The Yukon main office is 715 road miles away, a 13.9 hour drive, which affects mobilization for Palmview work.
Places near Palmview
- Directional boring in Perezville: 1.6 miles northwest
- Directional boring in Palmview South: 1.7 miles south
- Abram: 2.3 miles southwest
- Directional boring in Doffing: 3.2 miles north
- Directional boring in La Homa: 3.6 miles northeast
- Directional boring in Mission: 4 miles southeast
What boring work comes up near Palmview’s Edinburg Main Canal?
- Highway crossing: A bore beneath Interstate 2 can keep the existing pavement intact, with route depth and coverage planned for the utility.
- Water service: A line near Bentsen Palm Drive needs the address specific water provider confirmed before the bore route is set.
- Fiber drop: Along Veterans Boulevard, a fiber conduit bore can avoid cutting pavement and sidewalks when site access allows pits on each side.
- Canal crossing: A route beneath Edinburg Main Canal needs channel conditions considered and jurisdiction checked during planning.
- Rail crossing: At Border Pacific Railroad, the crossing agreement controls conditions such as casing, depth and flagging.
- Street service: A bore near Goodwin Road can connect a service line while leaving driveways and sidewalks uncut.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring in Palmview near Veterans Boulevard?
For a Palmview quote, start with where the work is, such as a Veterans Boulevard address or map pin. Tell us what goes underground, such as water or fiber, then give the pipe or conduit size and the footage. A sketch or plans showing a route near Interstate 2 or Edinburg Main Canal help us understand the crossings.
In Palmview, soil and crossings lead the price considerations because Hidalgo clay loam can affect reaming and pipe pull, while a route under Interstate 2 or Border Pacific Railroad adds crossing requirements. Length and pipe size shape the equipment and work plan. The number of marked utilities to expose, pavement, pits, excavator time and sand backfill also matter. Creek or drainage crossings add planning, and the 715 road miles from Yukon affect mobilization.
Questions people ask about boring in Palmview
Does Trinity Boring Solutions take directional boring jobs in Palmview, Hidalgo County?
Yes. We take Palmview work across Hidalgo County, and our crews may work from the Yukon main office or from satellite yards run by contractors we have vetted. You deal with Trinity from the first call through the bore log, whichever crew is at the site. We install lines such as water, sewer, electric conduit and fiber.
Can a Palmview bore go under Edinburg Main Canal?
A bore can be planned beneath Edinburg Main Canal, subject to the site and route review. The canal runs 3.86 channel miles in Palmview, and mapped streets cross named streams in the city. Before planning a Palmview crossing, we check whether the US Army Corps of Engineers has jurisdiction, since that can shape permit coordination. Channel conditions help determine the bore plan.
Who owns electric lines in Palmview, Hidalgo County, and who confirms conduit details?
The specific electric line owner must be confirmed for the Palmview address before a conduit bore is planned. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County, but that does not identify the provider at every address. The line owner confirms conduit specifications for a route such as one near Goodwin Road.
Can a Palmview bore under Bentsen Palm Drive avoid cutting the street?
Yes. Boring can pass beneath Bentsen Palm Drive without an open cut through the street when the site and approvals allow. Because Palmview is incorporated, we coordinate city street boring plans with the city, which owns those streets. A bore keeps the pavement intact, with entry and exit pits placed off the traveled surface where access permits.
Does housing age near Abram Road affect replacement bores in Palmview?
It can help frame the work, but housing age does not establish the age or location of buried lines. The American Community Survey 2019 to 2023 estimates put Palmview’s median housing year at 1995. Along Abram Road, we plan for the actual existing line and pothole marked utilities before drilling near them.
What ground does a Palmview bore pass through in Hidalgo soil?
The USDA soil survey maps Hidalgo soil across 73 percent of Palmview. At about 40 inches below the surface, clay loam is mapped under 74 percent of the area. Clay can hold an open hole but stick to the reamer and grip pipe, so the crew may use staged reaming and manage fluid carefully.
Does Trinity cover Perezville and rural sites outside Palmview?
We take work beyond Palmview, including nearby places such as Perezville and sites outside the city limits. Perezville is 1.6 miles northwest of Palmview. The route, access and scope determine how we plan a bore, including crossings on roads that connect the city with nearby areas.
How much notice does a Palmview bore near Goodwin Road need through Texas811?
Count back at least two working days from the planned start, excluding Saturdays, Sundays and legal holidays. Texas law allows a request no earlier than 14 days before excavation, and a start more than 14 days after the original notice needs a new request. If marks near Goodwin Road wear off or move, have them refreshed through Texas811 before work continues.
What affects the cost of a Palmview directional bore near Interstate 2?
The route and scope determine the price. Hidalgo clay loam, bore length, pipe or conduit size, utilities to expose and pavement all affect the work. A crossing beneath Interstate 2 or Border Pacific Railroad adds route and crossing considerations. Creek or drainage crossings, pits, excavator time, backfill and mobilization from Yukon also shape the job.
Where the Palmview facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Palmview
- U.S. Census Bureau, TIGER/Line 2024: Palmview boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Palmview
- U.S. Census Bureau, American Community Survey 2019 to 2023: Palmview housing units and year built
- Macrostrat geologic map compilation: map units under Palmview
- U.S. Department of Transportation, North American Rail Network: track owners in Hidalgo County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hidalgo County
- U.S. Geological Survey, Elevation Point Query Service: Palmview elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Palmview
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Palmview
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Palmview, Texas
Type the address of your job in Palmview. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
