Penitas Texas Directional Boring: McAllen Soil, Border Pacific, Edinburg Main Canal
Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), in Penitas for routes that need to pass under the Border Pacific Railroad or Edinburg Main Canal. Tom Gill Road is one of the local streets a bore may need to cross. Penitas is 719 road miles from our Yukon, Oklahoma main office, and the Border Pacific Railroad is one local crossing to plan around. The USDA soil survey maps McAllen fine sandy loam across much of the city; deeper sandy clay loam can grip a pipe, so we plan the reaming and pull around the mapped ground.
Penitas bores at a glance
- Incorporated city in Hidalgo County, Texas. Population 6,568 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 719 miles, about 14 hours of driving.
- Ground: McAllen soil is mapped on 43 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 2, US 83 and FM 1427. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: Border Pacific Railroad, with 4 mapped street and rail crossings.
- Named streams inside the boundary: Edinburg Main Canal.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Penitas near Edinburg Main Canal?
Penitas is in Hidalgo County, and the Census Bureau Vintage 2024 estimate puts its population at 6,568. We install water, sewer, gas, electric conduit and fiber, with routes planned to reach properties from streets such as Tom Gill Road or cross beneath features such as Edinburg Main Canal. The route and line type determine the bore plan.
Our main office is in Yukon, Oklahoma, and Penitas work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965 and has been boring since 1982. Four decades of directional boring matter on McAllen soil, where mapped sandy clay loam below the surface calls for attention to the hole and pipe during reaming.

What kind of ground should a Penitas bore expect in McAllen soil?
The USDA soil survey maps McAllen soil across 43 percent of Penitas, with McAllen fine sandy loam among the local map units. Fine sandy loam is the mapped surface texture across 75 percent of the city. At about 40 inches below the surface, sandy clay loam is mapped across 70 percent of the area, while the average clay content there is 27 percent. Our Penitas maps show patterns for planning a bore, not test borings that confirm conditions at a specific crossing. For a bore near Liberty Boulevard, the deeper clay mix can cling to the reamer and grip the pipe, so the drilling plan has to account for that behavior.
| USDA soil survey, inside the Penitas city limits | What is mapped |
|---|---|
| Soil series mapped | McAllen 43 percent, Brennan 25 percent, Hidalgo 11 percent, Cuevitas 5 percent and Runn 3 percent |
| Texture at the surface | fine sandy loam 75 percent, sandy clay loam 11 percent and silty clay 5 percent |
| Texture about 40 inches down | sandy clay loam 70 percent, clay loam 12 percent and cemented material 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 61 percent, clayey sand (SC) 25 percent and fat clay (CH) 6 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 3 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 8 percent of the area |
In Penitas, we have no bedrock mapped in the top five feet, but deeper rock may still affect bore depth. The USDA soil survey maps a seasonal water table within 60 inches across 3 percent of the area, so pits may need pumping if a Liberty Boulevard job encounters wet ground. Flood prone soils cover 6 percent, and high steel corrosion risk is mapped across 8 percent; the line owner should consider casing and tracer wire materials. The Lissie Formation, of Pleistocene age, includes clay, silt, sand, gravel and caliche, while mapped Alluvium is Chibanian. Those mixed materials make address level planning important.
How do crews bore Penitas sandy clay loam?
Penitas has sandy clay loam mapped about 40 inches down and fine sandy loam at the surface. We plan the bore for that soil mix and for local routes near Tom Gill Road.
- Sandy clay loam is mapped about 40 inches down in Penitas, so we use a fluid mix suited to clay and ream in stages before pulling pipe.
- McAllen fine sandy loam covers much of the mapped surface, so we keep the pipe ready before the final ream in ground that may not hold open.
- Near the 3 percent of Penitas mapped with a seasonal water table within 60 inches, compact pits and pumping can help manage water at the work area.
- At a crossing near Edinburg Main Canal, we plan depth below the channel and check jurisdiction during planning before choosing the bore path.

Where might a Penitas line need to go under Tom Gill Road?
Interstate 2, US 83 and FM 1427 run within Penitas, so a route touching their right of way needs its own crossing plan. Tom Gill Road is the longest named street in the city, at 4.15 miles. Liberty Boulevard runs 1.64 miles, and 11th Street runs 1.58 miles. A bore can pass below pavement rather than cut across it, but the route, right of way and required cover have to be planned for the particular road. Interstate 2 has 0.4 mapped roadway miles inside the limits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 2 | Interstate | 0.4 roadway miles inside | State highway office |
| US 83 | US highway | 5.6 roadway miles inside | State highway office |
| FM 1427 | State highway | 1.4 roadway miles inside | State highway office |
| Border Pacific Railroad | Railroad | 1.93 track miles inside | The railroad |
| Edinburg Main Canal | Stream | 0.28 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Río Grande | Lake or pond | 517 acres, inside | Checked for Corps of Engineers jurisdiction |
| Edinburg Settling Basin | Lake or pond | 17 acres, nearby | Checked for Corps of Engineers jurisdiction |
Border Pacific Railroad has 1.93 track miles inside Penitas, and public mapping shows 4 street and rail crossings in the city. A railroad route needs an agreement with the track owner, which sets crossing conditions such as casing, depth and flagging. Edinburg Main Canal has 0.28 channel miles in the limits, with 2 mapped street crossings of named streams. The Rio Grande is also mapped inside the city; a water crossing is checked for Army Corps jurisdiction during planning.
Do I need a permit for a Penitas crossing of Border Pacific Railroad?
For work in the Interstate 2, US 83 or FM 1427 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it. We prepare the bore plan and profile for the utility owner’s application and work under the permit issued to that owner. A crossing of Border Pacific Railroad needs an agreement from the railroad that owns the track, with crossing details set in that agreement. Because Penitas is incorporated, we plan city street boring as work under the city’s responsibility. A crossing of Edinburg Main Canal or the Rio Grande is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Hidalgo County and Penitas?
The water provider for a specific Penitas address has to be confirmed with the city, Hidalgo County or the local water district before a bore is planned. That check matters before setting a route near Tom Gill Road or another street. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. Those records do not identify the provider for every address, so the line owner has to be confirmed before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative | Electric utilities reporting service in Hidalgo County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Penitas’s median housing year at 2004, which we consider when planning underground work. Survey estimates say Penitas homes include 3 percent built before 1960, 30 percent built from 1960 to 1999, and 67 percent built in 2000 or later, informing our underground planning. That mix means a route near 11th Street could serve a newer connection or replace an older line. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

Do you cover Penitas and nearby La Joya?
Penitas is an incorporated city in Hidalgo County, covering 9.36 square miles at an elevation of 170 feet. For Penitas, we use ZIP codes 78576 and 78572 to identify the area when scoping directional boring requests. La Joya is 2.3 miles west, Perezville is 2.4 miles east, and Palmview is 4.0 miles southeast. Palmview is the nearest larger city, while Edinburg, the county seat, is 18.1 miles east. Penitas is 719 road miles and a 14.0 hour drive from our Yukon, Oklahoma main office, which can affect mobilization for work near US 83.
Places near Penitas
- Directional boring in La Joya: 2.3 miles west
- Directional boring in Perezville: 2.4 miles east
- Directional boring in Doffing: 3.6 miles northeast
- Abram: 3.6 miles southeast
- Directional boring in Palmview: 4 miles southeast
What kinds of bores come up near Edinburg Main Canal in Penitas?
- Highway crossing: A route beneath US 83 or Interstate 2 can keep pavement intact, with the right of way permit and bore profile planned for the crossing.
- Street service: A water or sewer line along Tom Gill Road can be bored from dirt pits, avoiding an open cut through the street surface.
- Fiber conduit: A conduit route near Liberty Boulevard can pass beneath pavement and mapped McAllen fine sandy loam without trenching the full route.
- Rail crossing: A utility route beneath Border Pacific Railroad needs the track owner’s agreement and crossing details before the bore plan is set.
- Canal crossing: A line beneath Edinburg Main Canal needs a planned depth under the channel and a jurisdiction check during planning.
- Electric conduit: Near 11th Street, the electric line owner is confirmed before conduit plans are finalized, since several utilities report county service.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near Interstate 2 in Penitas?
For a quote near Interstate 2 or Tom Gill Road, send the address or map pin first. Tell us what will go in the ground, such as water line or fiber conduit, then give the pipe or conduit size and planned footage. A sketch or plans help us understand the route and any nearby crossing.
A short route through McAllen fine sandy loam with no road, track or drainage crossing is simpler to plan than a route under Border Pacific Railroad or Interstate 2. The price also reflects pipe size, length, utilities to expose, pavement, drainage crossings, pits and backfill. Penitas is 719 road miles from Yukon, so mobilization matters too. A high profile or emergency schedule can change the work plan.
Questions people ask about boring in Penitas
Does Trinity take directional boring jobs in Penitas and Hidalgo County?
Yes. Across Texas, we take directional boring work in Penitas, including requests associated with ZIP codes 78576 and 78572. Your project is handled through Trinity from the first call through the bore log, whether our own crew or a vetted partner contractor is on site. A route near Tom Gill Road is planned for its specific ground and crossings.
What does a Penitas bore under Border Pacific Railroad require?
A bore under Border Pacific Railroad needs an agreement with the railroad that owns the track. The agreement sets crossing requirements, including casing, depth and flagging. With 1.93 track miles mapped inside Penitas, the proposed route and track crossing need to be addressed before the bore plan is finalized.
Can a Penitas line be bored under Edinburg Main Canal?
A line can be planned to pass beneath Edinburg Main Canal, subject to the route and site review. The canal has 0.28 channel miles mapped inside Penitas, and water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. The crossing depth and bore path must suit the channel.
Who owns electric lines in Penitas and Hidalgo County, and who confirms conduit specs?
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. Those county records do not establish which utility serves a particular Penitas address. The line owner needs to be confirmed before conduit specifications and the bore route are planned near US 83 or another local road.
Does Penitas control 11th Street, and can a bore avoid cutting it?
On Penitas streets, we recognize the incorporated city itself as responsible for its street work. A bore beneath 11th Street can avoid cutting the pavement by entering and exiting from work pits, if the site and route allow. The street is 1.58 miles long within the city, so the exact crossing location matters.
How old are buried lines near Penitas’s Liberty Boulevard, and could they need replacement?
The American Community Survey 2019 to 2023 estimates that 3 percent of Penitas homes predate 1960 and 67 percent were built in 2000 or later; the median housing year is 2004. Housing age does not establish the age of a buried line, so a replacement bore near Liberty Boulevard starts with locating and exposing marked utilities.
How far is Penitas from Yukon, and does nearby Palmview affect a job?
From our Yukon, Oklahoma main office, Penitas is 719 road miles away and a 14.0 hour drive, so we plan travel accordingly. Palmview, the nearest larger city, is 4.0 miles southeast of Penitas, but the distance from Yukon can still affect crew mobilization for a job near US 83. We review the location and scope when planning the work.
How much 811 notice does a Penitas bore near Tom Gill Road need?
For a bore near Tom Gill Road, Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. When a Penitas start moves more than 14 days past the original notice, we make a new request before rescheduling the bore. For Penitas work, we refresh worn or moved marks through Texas811 before continuing, so the bore follows current markings.
What affects the cost of directional boring under Interstate 2 in Penitas?
The job details determine the price. A crossing beneath Interstate 2 may require more planning than a short service route, while Border Pacific Railroad or Edinburg Main Canal also adds crossing considerations. Length, pipe size, soil, utilities to expose, pavement, pits, drainage crossings and mobilization from Yukon all affect the work.
Where the Penitas facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Penitas
- U.S. Census Bureau, TIGER/Line 2024: Penitas boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Penitas
- U.S. Census Bureau, American Community Survey 2019 to 2023: Penitas housing units and year built
- Macrostrat geologic map compilation: map units under Penitas
- U.S. Department of Transportation, North American Rail Network: track owners in Hidalgo County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hidalgo County
- U.S. Geological Survey, Elevation Point Query Service: Penitas elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Penitas
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Penitas
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Penitas, Texas
Type the address of your job in Penitas. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
