San Juan Texas Directional Boring: Hidalgo Soil, Rio Valley Track, Alamo Canal
Quick Answer: San Juan is an incorporated city, so Stewart Road is a city street; we take directional boring, also called horizontal directional drilling (HDD), for routes under the Alamo Main Irrigation Canal. The Yukon, Oklahoma main office is 703 road miles from San Juan, where the Rio Valley Switching Company track is one crossing to plan around. Hidalgo soil and clay loam can cling to the reamer and grip pipe. Staged reaming and a same day pull help manage that ground.
San Juan bores at a glance
- Incorporated city in Hidalgo County, Texas. Population 37,341 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 703 miles, about 13.7 hours of driving.
- Ground: Hidalgo soil is mapped on 60 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 2, US 83, US 83 Business, US 281 and FM 2557. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: Rio Valley Switching Company, with 8 mapped street and rail crossings.
- Named streams inside the boundary: Alamo Main Irrigation Canal.
- Public water: City of San Juan, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for boring under Stewart Road in San Juan?
San Juan is an incorporated city in Hidalgo County, and its 37,341 residents are counted in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber on routes such as Stewart Road, where an underground line can pass beneath pavement and driveways without an open cut. Call Trinity Boring Solutions at (405) 409-7423 to discuss the route.
Our main office is in Yukon, Oklahoma, and San Juan work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A typical San Juan job near Stewart Road is shorter, but still needs a route plan, utility checks and a bore log. We have done directional boring since 1982, and our family business started in 1965.

How does Hidalgo soil affect directional boring in San Juan?
The USDA soil survey maps Hidalgo soil across 60 percent of San Juan and Raymondville soil across 25 percent. At about 40 inches below the surface, clay loam is mapped across 83 percent of the area and clay across 12 percent. The survey maps an average clay content of 36 percent at that depth. Near the surface, sandy clay loam covers 59 percent and clay covers 12 percent. These are mapped patterns, not measurements from a bore site. Sticky clay can build up on a reamer, so the soil map helps us plan staged passes and fluid use.
| USDA soil survey, inside the San Juan city limits | What is mapped |
|---|---|
| Soil series mapped | Hidalgo 60 percent, Raymondville 25 percent and Harlingen 11 percent |
| Texture at the surface | sandy clay loam 59 percent, clay loam 25 percent and clay 12 percent |
| Texture about 40 inches down | clay loam 83 percent and clay 12 percent |
| Engineering class about 40 inches down | lean clay (CL) 85 percent and fat clay (CH) 14 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 38 percent of the area |
| Mapped as urban land (disturbed fill) | 1 percent of the area |
For San Juan boring, we treat bedrock as unmapped in the top five feet, while recognizing that deeper rock is not ruled out. Seasonal water tables are mapped in 1 percent of the area, and flood prone soils are not mapped. High steel corrosion risk is mapped across 38 percent, a concern for uncoated steel casing and tracer wire that the line owner can address through material choices. The Pleistocene Beaumont Formation, clay and mud, is mapped here as mostly low permeability material. That clay can hold an open hole, but heavy sections can cling to the reamer and grip pipe.
How do we bore through San Juan clay loam?
San Juan soil maps show clay loam below the surface and sandy clay loam near it. We plan the bore around those mapped conditions, then track the drill head as it advances beneath streets such as Veterans Boulevard.
- We use the USDA soil survey’s clay loam map at about 40 inches to plan staged reaming, which limits clay buildup before pulling pipe beneath Veterans Boulevard.
- The survey maps 36 percent average clay at that depth; we adjust drilling fluid and watch returns so pressure does not lift pavement on Stewart Road.
- Before the drill approaches a marked line near Raul Longoria Road, we hydrovac pothole it because locate paint shows position, not depth.
- We track the head from the surface and log depth and pitch as the bore advances beneath a San Juan street or the Alamo Main Irrigation Canal.

Where might a San Juan bore pass under Rio Valley Switching Company tracks?
Interstate 2 and US 83 each have 4.4 mapped roadway miles within San Juan. FM 2557 has 5.5 miles, while Texas State Highway 495 and FM 3072 each have 2.1 miles. Stewart Road is the city’s longest named street at 7.25 miles; Veterans Boulevard has 6.56 miles and Cesar Chavez Road has 5.0 miles. Those roads create possible bore routes beneath pavement and driveways. A highway crossing or a run along its right of way brings TxDOT into the route plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 2 | Interstate | 4.4 roadway miles inside | State highway office |
| US 83 | US highway | 4.4 roadway miles inside | State highway office |
| US 83 Business | US highway | 2.7 roadway miles inside | State highway office |
| US 281 | US highway | 0.2 roadway miles inside | State highway office |
| FM 2557 | State highway | 5.5 roadway miles inside | State highway office |
| Texas State Highway 495 | State highway | 2.1 roadway miles inside | State highway office |
| FM 3072 | State highway | 2.1 roadway miles inside | State highway office |
| US 281 Business | Highway nearby | 1 miles outside | State highway office |
| Interstate 69C | Highway nearby | 1.1 miles outside | State highway office |
| Rio Valley Switching Company | Railroad | 2.09 track miles inside | The railroad |
| Alamo Main Irrigation Canal | Stream | 5.65 channel miles inside | Checked for Corps of Engineers jurisdiction |
Rio Valley Switching Company owns 2.09 track miles in San Juan, where 8 mapped street and rail crossings make track locations part of route planning. A bore under the track needs an agreement with that railroad, which sets the crossing conditions. The Alamo Main Irrigation Canal runs 5.65 channel miles through the city, and 15 mapped street crossings pass over named streams. A canal crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. For San Juan crossings, we plan around the fact that no lakes or ponds are mapped within one mile.
Who approves a San Juan bore in Hidalgo County?
San Juan city streets, including Stewart Road, belong to the city itself. For work in the right of way of Interstate 2, US 83, FM 2557 or another state route, the line owner files the utility permit through TxDOT’s online RULIS system; the TxDOT Pharr District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. TxDOT cover rules set minimum depths at highway crossings, including 60 inches for electric and communication lines and water lines, and 60 inches for pressurized sewer lines. A Rio Valley Switching Company crossing needs that railroad’s agreement. The Alamo Main Irrigation Canal is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of San Juan system?
The City of San Juan public water system uses surface water and reports 7,317 service connections serving 30,000 people. That network matters when a proposed route approaches water lines along Cesar Chavez Road. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. We confirm the line owner for the specific San Juan address before planning an electric conduit bore, rather than assuming one provider serves every route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of San Juan | Public water system | Surface water | 7,317 connections, 30,000 people served |
| AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative | Electric utilities reporting service in Hidalgo County | EIA Form 861 | Confirm the line owner by address |
We use the American Community Survey 2019 to 2023 five year estimates placing San Juan’s median housing year at 1999 as context for underground planning. The estimates place 4 percent of homes before 1960, 48 percent from 1960 to 1999 and 48 percent in 2000 or later. A route near older homes or newer services on Raul Longoria Road may encounter different buried lines. We use hydrovac potholing to expose marked utilities before drilling near them, since surface paint shows position but not depth.

How far is San Juan from Pharr and our Yukon yard?
San Juan is in Hidalgo County, 8.9 miles south of county seat Edinburg and 3.2 miles northeast of the nearest larger city, Pharr. Alamo is 2.2 miles east, North Alamo is 2.4 miles northeast, South Alamo is 3.8 miles southeast and Lopezville is 3.9 miles north. The incorporated city covers 12.12 square miles, sits at an elevation of 107 feet and uses ZIP code 78589. The Yukon yard is 703 road miles away, a 13.7 hour drive; that distance affects mobilization for a Veterans Boulevard project.
Places near San Juan
- Directional boring in Alamo: 2.2 miles east
- North Alamo: 2.4 miles northeast
- Directional boring in Pharr: 3.2 miles southwest
- South Alamo: 3.8 miles southeast
- Directional boring in Lopezville: 3.9 miles north
What kinds of bores come up near Veterans Boulevard in San Juan?
- Highway crossing: A bore beneath Interstate 2 avoids cutting pavement, with the route and cover planned under TxDOT requirements.
- Water service: A route near Cesar Chavez Road can connect to the City of San Juan system after nearby marked lines are exposed.
- Fiber route: A bore beneath Veterans Boulevard can carry conduit past pavement and driveways without an open cut.
- Rail crossing: A route under Rio Valley Switching Company track requires a railroad agreement before the bore plan is set.
- Canal crossing: A route under the Alamo Main Irrigation Canal is checked for U.S. Army Corps of Engineers jurisdiction during planning.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a San Juan quote near Raul Longoria Road?
Start with where: an address or map pin near Raul Longoria Road gives us the route. Then tell us what goes underground, such as water or fiber, and how large the pipe or conduit is. Give us the footage from the route plan. A sketch or plans help show nearby streets, the Alamo Main Irrigation Canal or a crossing that needs closer review.
For San Juan projects, we set the price from the job details supplied for each boring crossing. Ground is one part: clay loam mapped in San Juan can cling to a reamer, and heavy clay may call for staged work. Crossings matter too, including pavement on Interstate 2 and the Rio Valley Switching Company track. Route length, pipe size, exposed utilities, pits, concrete, drainage crossings and excavator time can change the work. Mobilization also reflects the 703 road miles from Yukon, and high profile or emergency work can add planning demands.
Questions people ask about boring in San Juan
Does Trinity Boring Solutions take directional boring jobs in San Juan and Hidalgo County?
Yes. Trinity takes directional boring work in San Juan and across Texas. Our main office is in Yukon, and jobs can use our own crews or crews from partner drilling contractors we have vetted. You deal with Trinity from the first call through the bore log, including on a route near Stewart Road.
What does a San Juan bore under Rio Valley Switching Company track need?
It needs an agreement from Rio Valley Switching Company, which owns 2.09 track miles in San Juan. The railroad sets the crossing conditions, including casing, depth and flagging. We plan around the track location and provide the bore plan and profile for the crossing. If highway right of way is also involved, TxDOT asks for a copy of the railroad agreement.
Can a line be bored under the Alamo Main Irrigation Canal in San Juan?
A bore can be planned beneath the Alamo Main Irrigation Canal, which runs 5.65 channel miles through San Juan. During planning for a San Juan crossing, we check whether the US Army Corps of Engineers has jurisdiction. The route, depth and access need review before the bore is set, especially where a street crossing meets the canal.
Who runs San Juan’s public water system, and where does its water come from for our underground planning?
The City of San Juan owns and runs the public water system, which uses surface water. Public records list 7,317 service connections serving 30,000 people. For a route near Cesar Chavez Road, we confirm the water line locations before drilling so the bore plan accounts for the existing system.
Which electric line owner should I check for a San Juan conduit bore in Hidalgo County?
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. Those records do not identify the provider at every San Juan address. We confirm the line owner before planning a conduit bore, then check the conduit specifications for the proposed route near Veterans Boulevard or another local street.
Does the city or county control San Juan streets such as Cesar Chavez Road, and must they be cut?
San Juan is incorporated, so Cesar Chavez Road is a city street rather than a county road. A directional bore can pass under street pavement without an open cut. The route still needs to account for marked utilities and, if it reaches a state highway right of way, the applicable TxDOT permit.
How far is San Juan from Pharr and Trinity’s Yukon, Oklahoma main office?
San Juan is 3.2 miles northeast of Pharr and 703 road miles from our Yukon, Oklahoma main office, a 13.7 hour drive. That distance affects mobilization for a job near the Alamo Main Irrigation Canal or another San Juan route. We review the route and scope before scheduling crews.
How much notice does Texas811 need for a San Juan bore along Stewart Road?
The excavator or contractor making the request contacts Texas811 for the Stewart Road bore path at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For San Juan work, we follow Texas811 guidance, which describes that timing as at least two working days. If the start slips more than 14 days past the original notice, a new request is needed. On San Juan jobs, we have worn or moved marks refreshed through Texas811 before we continue work.
What affects the cost of a directional bore under Interstate 2 in San Juan?
The route length and pipe or conduit size matter, along with San Juan’s clay loam, pavement, exposed utilities and crossing conditions. A bore near Interstate 2 may need highway planning, while a route near Rio Valley Switching Company track adds railroad coordination. Pits, excavator time, backfill, emergency needs and mobilization from Yukon also affect the job scope.
Where the San Juan facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside San Juan
- U.S. Census Bureau, TIGER/Line 2024: San Juan boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: San Juan
- U.S. Census Bureau, American Community Survey 2019 to 2023: San Juan housing units and year built
- Macrostrat geologic map compilation: map units under San Juan
- U.S. EPA Safe Drinking Water Information System: public water systems serving San Juan
- U.S. Department of Transportation, North American Rail Network: track owners in Hidalgo County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hidalgo County
- U.S. Geological Survey, Elevation Point Query Service: San Juan elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to San Juan
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in San Juan
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in San Juan, Texas
Type the address of your job in San Juan. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
