Weslaco Texas Directional Boring: Hidalgo Soil, Texas Boulevard and Rio Valley Tracks
Quick Answer: Along Rio Valley Switching Company tracks, we take directional boring work in Weslaco, also called horizontal directional drilling (HDD). Our Yukon office is 713 road miles from Texas Boulevard, and work is handled by our own crews and vetted partner contractors. Hidalgo soil makes up much of the mapped ground, with clay loam below the surface that can grip a pipe. We plan the fluid and reaming stages around that soil.
Weslaco bores at a glance
- Incorporated city in Hidalgo County, Texas. Population 43,864 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 713 miles, about 13.9 hours of driving.
- Ground: Hidalgo soil is mapped on 66 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 2, US 83, US 83 Business, FM 88 and FM 1015. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: Rio Valley Switching Company and Rio Valley Switching Company (line shown as out of service), with 18 mapped street and rail crossings.
- Named streams inside the boundary: Llano Grande Lake.
- Public water: City of Weslaco, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Weslaco near Rio Valley Switching Company?
The Yukon yard is 713 road miles from Mile 3 Road, and Weslaco work is staffed by our crews and vetted partner contractors. The Census Bureau Vintage 2024 estimate puts Weslaco at 43,864 people in Hidalgo County. We install water, sewer, gas, electric conduit and fiber, including routes beneath Texas Boulevard or along Westgate Drive where open cuts would disrupt the street.
Our main office is in Yukon, Oklahoma, and Weslaco work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have focused on directional boring since 1982. That experience helps us plan for Weslaco’s Hidalgo soil, where clay loam deeper down can hold the hole and grip the pipe.

What kind of ground does a bore meet in Weslaco Hidalgo soil?
The USDA soil survey maps Hidalgo soil across 66 percent of Weslaco, with Hidalgo sandy clay loam and Hidalgo fine sandy loam among the mapped units. At the surface, sandy clay loam accounts for 56 percent of the mapped area, while clay loam accounts for 13 percent. About 40 inches down, clay loam is mapped under 79 percent of the area, with an average clay content of 32 percent. Across Weslaco, we treat mapped patterns as planning context, not test borings for a specific directional boring route. The deeper clay can cling to the reamer and tighten around pipe, so the bore plan needs controlled fluid and staged reaming.
| USDA soil survey, inside the Weslaco city limits | What is mapped |
|---|---|
| Soil series mapped | Hidalgo 66 percent, Raymondville 13 percent, Willacy 8 percent and Urban land (miscellaneous area) 3 percent |
| Texture at the surface | sandy clay loam 56 percent, fine sandy loam 20 percent and clay loam 13 percent |
| Texture about 40 inches down | clay loam 79 percent, sandy clay loam 10 percent and clay 3 percent |
| Engineering class about 40 inches down | lean clay (CL) 92 percent and fat clay (CH) 4 percent |
| Average clay content about 40 inches down | 32 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 2 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 22 percent of the area |
| Mapped as urban land (disturbed fill) | 3 percent of the area |
In Weslaco, we do not read the top five feet as mapped bedrock, though deeper rock can still affect a bore. The geologic map shows Holocene stabilized sand dunes, mostly sand, so conditions may change along a route. A seasonal water table within 60 inches is mapped in 2 percent of the area, while flood prone soils are not mapped. High steel corrosion risk is mapped in 22 percent of the area, so the line owner should consider casing and tracer wire materials; HDPE does not share that steel concern.
How do we bore Weslaco clay loam without losing the line?
Weslaco’s clay loam at about 40 inches can hold an open hole, then stick to the reamer or grip pipe. We adjust the fluid and reaming sequence to suit the mapped ground along the route.
- Hidalgo soil has clay loam below the surface, so we use a thinner fluid mix and open the hole in stages to limit sticky buildup on the reamer.
- Where the route crosses the mapped sandy dune deposits, we keep the bore fluid ready to support loose ground and have the pipe set before the final reaming pass.
- At a Texas Boulevard crossing, we track the drill head from the surface and record depth and pitch as it advances beneath the pavement.
- For a marked utility near Mile 3 Road, we hydrovac pothole it before drilling close by; the paint mark does not show how deep the line sits.

What is in the way of a new line in Weslaco near Texas Boulevard?
Interstate 2, US 83 and US 83 Business each have 8.8 mapped roadway miles inside Weslaco. FM 88 adds 5.4 miles, and FM 1015 adds 3.5 miles. US 281 is 0.8 miles outside the city limits. Among local streets, Texas Boulevard runs 6.83 miles in the city, Mile 3 Road runs 5.51 miles and Westgate Drive runs 4.68 miles. Those routes can put pavement between the entry and exit pits, so a bore can keep the roadway surface intact.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 2 | Interstate | 8.8 roadway miles inside | State highway office |
| US 83 | US highway | 8.8 roadway miles inside | State highway office |
| US 83 Business | US highway | 8.8 roadway miles inside | State highway office |
| FM 88 | State highway | 5.4 roadway miles inside | State highway office |
| FM 1015 | State highway | 3.5 roadway miles inside | State highway office |
| US 281 | Highway nearby | 0.8 miles outside | State highway office |
| Rio Valley Switching Company | Railroad | 4.59 track miles inside | The railroad |
| Rio Valley Switching Company (line shown as out of service) | Railroad | 0.64 track miles inside | The railroad |
| Llano Grande Lake | Stream | 0.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| La Cruz Resaca | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Llano Grande Lake | Lake or pond | 201 acres, nearby | Checked for Corps of Engineers jurisdiction |
Rio Valley Switching Company has 4.59 track miles in Weslaco, plus 0.64 miles on a line shown as out of service. Public maps show 18 street and rail crossings in the city. A track crossing needs an agreement from Rio Valley Switching Company, which sets crossing conditions such as casing, depth and flagging. Llano Grande Lake has 0.03 channel miles inside the limits, and one mapped street crossing of a named stream is recorded. Water crossings are checked for federal jurisdiction during planning.
Whose permission does a Weslaco bore in Hidalgo County need?
Because Weslaco is incorporated, we coordinate city street boring work with the city rather than treating those streets as county roads. For work in the right of way of Interstate 2, US 83, FM 88 or FM 1015, the utility owner applies for the TxDOT utility permit through RULIS. In Weslaco, we plan around the TxDOT Pharr District review when its review applies to the boring work. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that utility. A crossing of Rio Valley Switching Company tracks needs that railroad’s agreement; when a line also uses highway right of way, TxDOT asks for a copy. A crossing at Llano Grande Lake is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are already in the ground near City of Weslaco lines?
The City of Weslaco public water system uses surface water and reports 12,361 service connections serving 40,033 people. That network is an important consideration when routing a new service near Texas Boulevard or Mile 3 Road. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. We confirm the line owner for the specific address before planning an electric conduit bore, rather than assuming one provider serves every Weslaco property.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Weslaco | Public water system | Surface water | 12,361 connections, 40,033 people served |
| AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative | Electric utilities reporting service in Hidalgo County | EIA Form 861 | Confirm the line owner by address |
We use the American Community Survey 2019 to 2023 estimate of 1994 as Weslaco’s median housing year when framing underground planning. We account for Weslaco’s housing mix in underground planning: 7 percent before 1960, 51 percent from 1960 to 1999, and 42 percent in 2000 or later. Older services near Westgate Drive may call for replacement routes, while newer areas can need added connections. On Weslaco city streets, we hydrovac pothole every marked utility on the bore path before drilling nearby; paint shows position, not depth.

How far is Weslaco from Villa Verde and our Yukon yard?
Weslaco is in Hidalgo County, covers 16.92 square miles and sits at 78 feet elevation. We plan directional boring service around Weslaco’s ZIP codes, 78596 and 78599, when identifying the service area. Villa Verde is 2.2 miles south, while Midway South is 2.1 miles west. Edinburg, the county seat and nearest larger city listed, is 15.0 miles northwest. The Yukon yard is 713 road miles away, a 13.9 hour drive. Those distances matter when a route near FM 88 needs equipment and crew mobilization.
Places near Weslaco
- Midway South: 2.1 miles west
- Villa Verde: 2.2 miles south
- Llano Grande: 2.4 miles southeast
- Directional boring in Midway North: 2.7 miles northwest
- Directional boring in Donna: 3.2 miles west
- Directional boring in Edinburg: 15 miles northwest
Which jobs call for a bore near Weslaco Mile 3 Road?
- Highway crossing: A bore beneath Interstate 2 keeps the route below the pavement, with entry and exit pits placed outside the travel lanes.
- Street service: A line under Texas Boulevard can connect properties without cutting across the roadway surface.
- Water service: A connection near the City of Weslaco water system needs a route checked against the existing lines.
- Rail crossing: A crossing of Rio Valley Switching Company track needs an agreement covering the railroad’s crossing conditions.
- Drainage crossing: A route near Llano Grande Lake is planned with a check for U.S. Army Corps of Engineers jurisdiction.
- Fiber route: A run along Mile 3 Road can use a bore to pass beneath pavement and marked utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Weslaco bore near Interstate 2?
For a Weslaco quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Interstate 2 also needs enough detail to show the pavement limits and proposed pit locations. That lets us review the crossing and plan the bore profile.
The price reflects the work, not one single measurement. Hidalgo soil and clay loam can affect drilling fluid and reaming; crossings of Interstate 2 or Rio Valley Switching Company tracks add coordination and design needs. We also consider pipe size, length, utilities to expose, pavement, drainage crossings, pits, excavator time and backfill. Mobilization matters because the Yukon yard is 713 road miles from Weslaco. High profile or emergency work can change the scope as well.
Questions people ask about boring in Weslaco
Does Trinity take directional boring jobs in Weslaco and Hidalgo County?
Yes. We take directional boring work in Weslaco and across Texas, including routes subject to the TxDOT Pharr District review. Our own crews and partner drilling contractors we have vetted staff the work, with Trinity handling the customer relationship from the first call through the bore log. For a route near Texas Boulevard, the project details help us plan around street pavement and existing utilities.
Who is responsible for Westgate Drive in Weslaco, and does it need to be cut?
Weslaco is an incorporated city, so its city streets belong to the city itself. A bore under Westgate Drive can keep the roadway surface uncut, with pits in the ground on either side of the crossing. The route still needs to account for marked utilities and any applicable approvals.
How do older homes and buried lines near Mile 3 Road affect replacement bores in Weslaco?
Weslaco’s median housing year is 1994, according to the American Community Survey 2019 to 2023 five year estimates. Older homes and services near Mile 3 Road may need replacement routes, while later construction can require new connections. We expose marked utilities along the bore path before drilling near them.
What soil does a bore pass through in Weslaco, including Hidalgo soil?
The USDA soil survey maps Hidalgo soil across 66 percent of Weslaco. About 40 inches down, clay loam is mapped under 79 percent of the area. That clay can cling to the reamer and grip pipe, so staged reaming and fluid control matter for a route near Texas Boulevard.
Could we encounter deeper rock on a Weslaco directional bore even though bedrock is not mapped in the top five feet?
Bedrock is not mapped in the top five feet of Weslaco, which does not rule out deeper rock. The geologic map shows Holocene stabilized sand dunes made mostly of sand. A route near FM 88 still needs its ground conditions considered along the full bore path.
Who approves a bore under Interstate 2 in Weslaco?
For work in Interstate 2 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it. We prepare the bore plan and profile for the owner’s application. The permit governs the approved work and may set the required crossing depth.
Does Trinity cover Midway South and rural sites outside Weslaco?
Yes. We take work around Weslaco, including routes toward Midway South, 2.1 miles west of the city. Each address and route needs its own review, especially where a bore meets a road, drainage feature or existing utility outside the city limits.
How much notice does Texas811 need for a bore near Texas Boulevard in Weslaco?
The person requesting the locate needs to describe the bore path, such as a route along Texas Boulevard. Texas law requires notice at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days beyond the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of a directional bore near Interstate 2 in Weslaco?
Cost depends on the route and work involved. Hidalgo soil, pipe size and bore length affect the drilling plan. Crossings of Interstate 2, Rio Valley Switching Company tracks or marked utilities can add coordination and exposure work. Pavement, pits, backfill, drainage crossings and the 713 road miles from the Yukon yard also affect the job.
Where the Weslaco facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Weslaco
- U.S. Census Bureau, TIGER/Line 2024: Weslaco boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Weslaco
- U.S. Census Bureau, American Community Survey 2019 to 2023: Weslaco housing units and year built
- Macrostrat geologic map compilation: map units under Weslaco
- U.S. EPA Safe Drinking Water Information System: public water systems serving Weslaco
- U.S. Department of Transportation, North American Rail Network: track owners in Hidalgo County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hidalgo County
- U.S. Geological Survey, Elevation Point Query Service: Weslaco elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Weslaco
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Weslaco
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Weslaco, Texas
Type the address of your job in Weslaco. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
