trinityboringsolutions.com

Dime Box Texas Directional Boring: Crockett Soil, FM 141 and Union Pacific

Quick Answer: What lies under the top five feet in Dime Box? The USDA soil survey maps fine sandy loam at the surface and clay under about 40 inches. We do directional boring, also called horizontal directional drilling (HDD), for routes near FM 141. Dime Box is 397 road miles from our Yukon, Oklahoma main office, so Ramsey Street access and mobilization shape planning. Crockett soil covers 48 percent of the mapped area, and sticky clay can grip pipe during a pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Dime Box bores at a glance

  • Unincorporated community in Lee County, Texas. Population 207 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 397 miles, about 7.8 hours of driving.
  • Ground: Crockett soil is mapped on 48 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 27 percent of the area.
  • Highways inside the boundary: FM 141. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 141 in Dime Box?

What lies under the top five feet in Dime Box? The USDA soil survey maps fine sandy loam at the surface, with clay common at about 40 inches. The Census Bureau counted 207 people here in 2020. We install water, sewer, gas, electric conduit and fiber, with routes that could serve homes along Ramsey Street or connect properties near FM 141.

Our main office is in Yukon, Oklahoma, and Dime Box work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and directional boring has been part of our work since 1982. In Dime Box, our range from 3/4 inch service lines to 48 inch casing covers both small connections and larger routes near FM 141.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show under Crockett soil in Dime Box?

The USDA soil survey maps Crockett fine sandy loam, 1 to 5 percent slopes, across 48 percent of Dime Box. Jedd fine sandy loam covers 26 percent, Gasil covers 15 percent and Mabank covers 9 percent. Fine sandy loam is the surface texture across 99 percent of the mapped area. At about 40 inches, clay is mapped under 58 percent, bedrock under 26 percent and sandy clay loam under 15 percent. These are mapped patterns, not test borings, so the route and bore plan still need site specific review.

USDA soil survey, inside the Dime Box mapped community boundaryWhat is mapped
Soil series mappedCrockett 48 percent, Jedd 26 percent, Gasil 15 percent and Mabank 9 percent
Texture at the surfacefine sandy loam 99 percent
Texture about 40 inches downclay 58 percent, bedrock 26 percent and sandy clay loam 15 percent
Engineering class about 40 inches downlean clay (CL) 72 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches27 percent of the area (0 percent hard rock, 27 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel58 percent of the area

Bedrock is mapped within 60 inches under 27 percent of Dime Box, mostly as weathered bedrock; hard bedrock is not mapped at that depth. The typical mapped depth is 26 inches, so the route needs checking for early rock. Seasonal water tables and flood prone soils are not mapped. High steel corrosion risk is mapped under 58 percent, a concern for uncoated casing or tracer wire that the line owner should weigh. The Cook Mountain Formation, of Bartonian age, includes clay, sandstone and siltstone, so ground can change along a bore.

What does it take to bore through clay in Dime Box?

Crockett soil and clay mapped under about 40 inches call for a controlled reaming plan in Dime Box. We track the drill head from the surface and log depth and pitch as the bore advances.

  1. Crockett soil is fine sandy loam near the surface, but clay is common lower down; we use staged reaming and manage fluid to limit sticky buildup.
  2. With clay mapped under about 40 inches, we plan the pipe pull for the same work window as opening the hole to reduce the chance of a tight grip.
  3. Bedrock is mapped within 60 inches under 27 percent of Dime Box, so we check the route and track depth and pitch as the ground changes.
  4. Near FM 141 or Union Pacific track, we locate and expose marked utilities before drilling close, then keep pits clear of the crossing surface.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads, tracks or creeks could a Dime Box bore cross near Ramsey Street?

FM 141 is the state highway mapped inside Dime Box, with 1.5 roadway miles in the community. No other highway is mapped within 1.5 miles outside the boundary. Ramsey Street is the longest named street at 0.92 miles; Orange Street and Guy M Bryan Avenue each extend 0.54 miles. Bowers Street also extends 0.54 miles. These streets may shape the approach and pit locations, while a route under FM 141 needs state review rather than treatment as an ordinary local street crossing.

CrossingTypeMapped extentWho has a say
FM 141State highway1.5 roadway miles insideState highway office
Union PacificRailroad1.42 track miles insideThe railroad
Brushy CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 1.42 track miles inside Dime Box on its Giddings Subdivision, and three mapped street and rail crossings make rail coordination relevant to routes near Ramsey Street. No named stream is mapped inside the community, and no street crossing of a named stream is mapped. Brushy Creek is 1.0 mile outside the boundary, with no lakes or ponds mapped within one mile. If a proposed route reaches a creek, its crossing is checked for federal jurisdiction during planning.

Whose permission does a Dime Box bore in Lee County need?

Dime Box is an unincorporated community in Lee County, so its local streets are not managed by a city government. For work in FM 141 right of way, the line owner applies through TxDOT’s RULIS system; the TxDOT Austin District reviews it, and we work from the utility permit with a bore plan and profile. Under an existing highway, the line must be installed by boring or tunneling. A bore under Union Pacific track also needs an agreement from the railroad that sets crossing conditions. If a route reaches Brushy Creek, planning checks whether the crossing is under U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Lee County near Dime Box?

EPA drinking water records do not identify a provider for a specific Dime Box address, so the water provider must be confirmed with Lee County, the county, or the local water district before planning a bore. Electric service reporting in Lee County includes Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Fayette Electric Cooperative. Those reports do not identify the provider at every address. Before a conduit bore near Ramsey Street, we confirm the line owner for that location.

Line ownerWhat it isSourceSize
Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Fayette Electric CooperativeElectric utilities reporting service in Lee CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Dime Box at 1995. Seven percent of homes were built before 1960, 49 percent from 1960 to 1999, and 44 percent in 2000 or later. That mix can mean either replacement work or a new service near FM 141. We use hydrovac potholing to expose marked lines before drilling near them, since locate marks show position, not depth; the water provider and electric line owner must be identified for the specific route.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Dime Box from Giddings and nearby communities?

Dime Box is an unincorporated census designated place in Lee County, at an elevation of 380 feet and covering 0.72 square miles. Its ZIP code is 77853. Deanville is 6.4 miles northeast; Cade Lakes is 11.4 miles north; Lexington is 11.9 miles west. Giddings, the county seat and nearest larger city, is 13.4 miles southwest. Caldwell is 14.1 miles northeast. From our Yukon, Oklahoma main office, the drive is 397 road miles and 7.8 hours, which makes mobilization part of planning for a Dime Box job.

Places near Dime Box

Which jobs call for a bore near Guy M Bryan Avenue in Dime Box?

  • Highway crossing: A bore beneath FM 141 can keep the roadway surface intact, with the line owner arranging the TxDOT permit.
  • Water service: A new line near Ramsey Street starts with confirming the address provider before the route is designed.
  • Fiber conduit: Along Guy M Bryan Avenue, a conduit route needs marked utilities exposed before the drill approaches them.
  • Rail crossing: A route beneath Union Pacific track needs railroad agreement and crossing conditions worked into the bore plan.
  • Electric conduit: Near Orange Street, we confirm which reported Lee County electric provider owns the line before planning a crossing.
  • Creek route: If a Dime Box project reaches Brushy Creek outside the community, its crossing gets checked for federal jurisdiction.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Dime Box bore near Union Pacific?

For a Dime Box quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help. A route near Union Pacific track needs early review because the railroad sets crossing conditions. FM 141 also changes the plan if the route enters state right of way.

The price depends on the route and work involved. Crockett soil and clay can affect drilling time and fluid control, while mapped weathered bedrock may change the tooling. Crossings of FM 141 or Union Pacific track add planning and approval steps. Pipe size, length, exposed utilities, pavement, pits and excavator time also matter. Dime Box is 397 road miles from Yukon, so mobilization is part of the job scope.

Questions people ask about boring in Dime Box

Does Trinity take directional boring jobs in Dime Box and Lee County?

Yes. We take directional boring work in Dime Box and across Texas, with our Yukon main office coordinating the job and either our own crews or vetted partner contractor crews staffing the site. We stay your point of contact from the first call through the bore log, including for routes near FM 141.

Does Crockett soil in Dime Box create a corrosion issue for steel pipe?

The USDA soil survey maps high steel corrosion risk under 58 percent of Dime Box, including areas mapped as Crockett soil. The line owner should consider casing and tracer wire materials for the specific route. HDPE is not subject to the same soil corrosion concern, but the line owner selects the materials.

What ground does a bore pass through in Dime Box near Crockett soil?

The USDA soil survey maps fine sandy loam at the surface across 99 percent of Dime Box. Crockett soil covers 48 percent of the mapped area, and clay is mapped under about 40 inches across 58 percent. That sticky lower soil can build up on a reamer, so fluid and reaming stages need to suit the route.

How much rock is mapped in the top five feet of Dime Box?

Bedrock is mapped within 60 inches under 27 percent of Dime Box, and the mapped bedrock is weathered rather than hard. Its typical mapped depth is 26 inches. A route still needs site review because mapped soil information is not a test boring and does not establish what lies at every point.

Who approves a bore under FM 141 in Dime Box?

For work in FM 141 right of way, the utility that owns the line submits the application in TxDOT’s RULIS system. The TxDOT Austin District reviews it, and we provide the bore plan and profile for the utility owner’s application. A bore beneath existing highway pavement uses boring or tunneling.

What does a bore under Union Pacific track in Dime Box require?

Union Pacific owns the track in Dime Box, on its Giddings Subdivision. A rail crossing needs an agreement with the railroad, which establishes conditions such as casing, depth and flagging. If the route also occupies highway right of way near FM 141, TxDOT asks for a copy of that agreement.

Does Trinity cover Deanville and rural sites outside Dime Box?

Yes. We take work across Texas, including rural routes around Dime Box and nearby Deanville, 6.4 miles northeast. The address and route determine crew and mobilization planning; a job near FM 141 or Union Pacific track also needs its crossing requirements included.

How much Texas811 notice is needed for a bore near Ramsey Street in Dime Box?

Paint near Ramsey Street shows a marked line’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If marks wear off or move, they must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near FM 141 in Dime Box?

The route length, pipe size, Crockett soil and any bedrock affect the work. Crossings, exposed utilities, pavement, pits and excavator time also shape the scope. A route under FM 141 or Union Pacific track adds coordination, and the 397 road miles from Yukon affect mobilization.

Where the Dime Box facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Dime Box

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Dime Box, Texas

Type the address of your job in Dime Box. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Dime Box

All counties: Texas county list.