trinityboringsolutions.com

Cade Lakes Texas Directional Boring: Arenosa Sand, FM 908 and Second Davidson Creek

Quick Answer: Arenosa fine sand cuts easily and can cave behind the drill, so our directional boring, also called horizontal directional drilling (HDD), can place lines beneath FM 908 without opening the pavement. Cade Lakes is 386 road miles from our Yukon, Oklahoma main office, and Second Davidson Creek shapes access planning. We can size work from 3/4 inch service lines to 48 inch casing for routes near Pecan Drive. Pits can sit off Elm Drive pavement.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cade Lakes bores at a glance

  • Unincorporated community in Burleson County, Texas. Population 507 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 386 miles, about 7.6 hours of driving.
  • Ground: Arenosa soil is mapped on 33 percent of the area, with fine sand about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 11 percent of the area.
  • Highways inside the boundary: FM 908. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Second Davidson Creek.
  • Public water: Cade Lakes Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near FM 908 in Cade Lakes?

Cade Lakes is an unincorporated community in Burleson County, where the Census Bureau counted 507 people in the 2020 Census. Along FM 908 and streets such as Pecan Drive, we install water, sewer, gas, electric conduit and fiber lines by directional boring. The route and line type shape the bore plan.

Our main office is in Yukon, Oklahoma, and Cade Lakes work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that began in 1965 and has done directional boring since 1982. The 3/4 inch service line to 48 inch casing range can fit work along FM 908, from short service runs to larger crossings.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does a bore meet in Cade Lakes near Arenosa soil?

The USDA soil survey maps Arenosa soil across 33 percent of Cade Lakes, with Padina across 29 percent. Fine sand is mapped at about 40 inches below the surface across 71 percent of the area; the survey also maps sandy clay loam there across 10 percent. Across the surface, fine sand covers 63 percent and fine sandy loam 18 percent. We use Arenosa and Padina map patterns for planning, not as test borings. Sand is easy to cut, but the hole can slough behind the drill head, so staged reaming and drilling fluid help hold it open.

USDA soil survey, inside the Cade Lakes mapped community boundaryWhat is mapped
Soil series mappedArenosa 33 percent, Padina 29 percent, Robco 10 percent, Jedd 8 percent and Cadelake 8 percent
Texture at the surfacefine sand 63 percent, fine sandy loam 18 percent and loamy fine sand 10 percent
Texture about 40 inches downfine sand 71 percent, sandy clay loam 10 percent and bedrock 8 percent
Engineering class about 40 inches downsilty sand (SM) 38 percent, sand with silt (SP SM) 33 percent and lean clay (CL) 11 percent
Average clay content about 40 inches down8 percent
Bedrock mapped within 60 inches11 percent of the area (0 percent hard rock, 11 percent weathered rock)
Seasonal water table within 60 inches19 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel21 percent of the area

The USDA soil survey maps bedrock within 40 inches in 8 percent of the area and within 60 inches in 11 percent; the mapped bedrock is weathered, not hard. That can slow a bore where it is met. A seasonal water table is mapped within 40 inches in 19 percent, so pits may need pumping and wet sand can flow. Flood prone soils cover 1 percent. High steel corrosion risk is mapped in 21 percent, so the line owner should consider casing and tracer wire protection. The Sparta Sand unit, of Bartonian age, includes fine quartz sand with siltstone and claystone; its variable layers can change drilling conditions.

How do we drill Cade Lakes where fine sand is common?

Fine sand is mapped at about 40 inches across much of Cade Lakes. It drills readily, but the bore can cave behind the bit. We match fluid, reaming and pit work to the route near FM 908 or a local creek.

  1. Arenosa fine sand can fall back behind the bit, so we use drilling fluid to support the hole and ream in stages before pulling pipe.
  2. Before the drill nears a marked line, we expose it with hydrovac potholing; on a Pecan Drive crossing, paint alone does not show burial depth.
  3. A walkover locator follows the drill head from the surface, while we record depth and pitch along routes near FM 908.
  4. With a seasonal water table mapped within 40 inches in 19 percent of the area, we keep pits small and pump water when needed near Second Davidson Creek.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

How would we plan a bore crossing at Second Davidson Creek in Cade Lakes?

FM 908 runs 1.2 mapped roadway miles inside the Cade Lakes community boundary. Texas State Highway 21 is 0.9 miles outside that boundary. Elm Drive is the longest named street at 2.73 miles, followed by Sugar Hill Road at 1.77 miles and Pecan Drive at 1.44 miles. A bore can pass beneath pavement rather than cut across it, subject to the applicable road approval. The route and available work space determine where entry and exit pits can go.

CrossingTypeMapped extentWho has a say
FM 908State highway1.2 roadway miles insideState highway office
Texas State Highway 21Highway nearby0.9 miles outsideState highway office
Second Davidson CreekStream2.61 channel miles insideChecked for Corps of Engineers jurisdiction
East LakeLake or pond42 acres, insideChecked for Corps of Engineers jurisdiction
West LakeLake or pond40 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the community or within one mile outside it, and no street and rail crossings are mapped. Second Davidson Creek runs 2.61 channel miles inside the community, with three mapped street crossings of named streams. East Lake and West Lake are also inside the boundary. A creek or lake route calls for careful depth and access planning, and creek crossing plans are checked for possible U.S. Army Corps of Engineers jurisdiction.

Who approves a bore on Cade Lakes roads in Burleson County?

Cade Lakes has no city government, so its streets are not city streets; county or state authority depends on the road. For a bore in FM 908 right of way, the line owner files the utility permit through TxDOT’s online RULIS system, not the driller. We provide the bore plan and profile, and the TxDOT Bryan District reviews the application. TxDOT rules call for highway lines to be bored or tunneled beneath existing pavement. Crossings need encasement and rural highway bores extend beneath all travel lanes. Required cover depends on the line: electric and communication lines need 60 inches at a crossing, water lines 60 inches, and pressurized sewer lines 60 inches. The district can set a different depth in the permit.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Cade Lakes through Cade Lakes Water Supply Corporation?

Cade Lakes Water Supply Corporation supplies groundwater to 510 people through 354 service connections. That network is a key reference for a water service bore near Pecan Drive or Elm Drive. Utilities reporting electric service in Burleson County include Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative. We confirm which line owner is involved at the specific route before planning an electric conduit bore, since the county list does not identify service at every address.

Line ownerWhat it isSourceSize
Cade Lakes Water Supply CorporationPublic water systemGroundwater wells354 connections, 510 people served
Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric CooperativeElectric utilities reporting service in Burleson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put the median housing year in Cade Lakes at 2005; 61 percent of homes were built in 2000 or later, and 39 percent from 1960 to 1999. Those figures describe homes, not the age of buried lines. A replacement route near Sugar Hill Road may meet older utilities or newer service connections. We hydrovac pothole every marked utility on the bore path before drilling near it, including a line crossing beneath Elm Drive.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Cade Lakes, Caldwell and the Rockdale area?

Cade Lakes is in Burleson County at an elevation of 414 feet, covers 1.88 square miles and uses ZIP code 77836. Caldwell, the county seat, is 4.5 miles east; Deanville is 6.1 miles south and Dime Box is 11.4 miles south. Rockdale, the nearest larger city, is 17.0 miles northwest. From our Yukon, Oklahoma main office, the drive is 386 road miles and 7.6 hours. That distance is part of planning crew and equipment mobilization for a bore near FM 908 or Second Davidson Creek.

Places near Cade Lakes

What would we bore near Pecan Drive in Cade Lakes?

  • Highway crossing: A bore beneath FM 908 needs a route and cover plan that fits the TxDOT right of way.
  • Water service: A new connection near Pecan Drive can be routed underground while avoiding marked utilities.
  • Fiber conduit: A run along Elm Drive can pass beneath pavement without an open cut across the street.
  • Creek crossing: A route under Second Davidson Creek needs depth and pit planning for the channel and possible water.
  • Lake service: A line near East Lake or West Lake needs an entry and exit path that accounts for nearby water.
  • Replacement line: Work near Sugar Hill Road can use potholing to locate existing lines before the drill advances.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Yaupon Drive in Cade Lakes?

For a route near Yaupon Drive, first send the address or map pin. Tell us what goes underground, such as water service or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show nearby streets, utilities and any creek crossing. Those details let us review the proposed path.

A short, clear route through Arenosa fine sand may be simpler to plan than one with creek access, pavement or many utilities to expose. Price depends on length, pipe or conduit size, soil and rock, crossings, concrete or pavement, pits and excavator time. A route beneath FM 908 can add permit and cover requirements. Second Davidson Creek affects crossing and pit planning. Cade Lakes is 386 road miles from Yukon, so mobilization is also part of the job scope.

Questions people ask about boring in Cade Lakes

Does Trinity Boring Solutions take directional boring work in Cade Lakes, Burleson County, and who staffs it?

Yes. We take directional boring work in Cade Lakes, and our own crews handle the work, with support from vetted partner contractor yards when used. For FM 908 work, we coordinate with the TxDOT Bryan District from the first call through the bore log. Routes near FM 908 can be reviewed with the local ground and crossing conditions in mind.

Who is responsible for Pecan Drive in Cade Lakes, and does a bore require cutting it?

Cade Lakes has no city government, so its streets fall under county authority rather than a city street department. A directional bore beneath Pecan Drive can avoid cutting the street surface, with pits placed on either side of the route. The road authority and any applicable approval depend on the specific location.

Does housing age near Sugar Hill Road in Cade Lakes tell us how old buried lines are?

No. The American Community Survey 2019 to 2023 five year estimates give a 2005 median housing year for Cade Lakes, but that does not date the pipes under Sugar Hill Road. Replacement bores need utility locating and potholing to find existing lines and confirm their depth before drilling nearby.

Can groundwater or flood prone ground affect bore pits near Second Davidson Creek in Cade Lakes?

It can. The USDA soil survey maps a seasonal water table within 40 inches in 19 percent of Cade Lakes and flood prone soils in 1 percent. Near Second Davidson Creek, wet sand can flow into pits, so we plan pit size and pumping and set the bore path below the channel.

What ground does a bore pass through near Arenosa soil in Cade Lakes?

The USDA soil survey maps Arenosa soil across 33 percent of Cade Lakes. At about 40 inches, fine sand is mapped across 71 percent of the area. Sand cuts easily but may cave behind the drill, so staged reaming and drilling fluid help keep the bore open.

Is bedrock likely to affect a directional bore in Cade Lakes?

The USDA soil survey maps bedrock within 60 inches in 11 percent of Cade Lakes, and within 40 inches in 8 percent. The mapped bedrock in that depth range is weathered rather than hard. It may slow drilling where encountered, but the map does not establish conditions at a particular address.

Does Trinity cover Caldwell and rural sites outside the Cade Lakes boundary?

Yes. We take work across Texas, including Cade Lakes, Caldwell and rural routes outside the mapped community boundary. Caldwell is 4.5 miles east of Cade Lakes. Each job still needs its own route review, since a bore near FM 908 differs from one crossing a creek or serving an outlying property.

How early should I call Texas811 for a bore along Elm Drive in Cade Lakes?

For an Elm Drive bore, request locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work slips more than 14 days past the original notice, make a new request. On Elm Drive, we refresh worn or moved marks before continuing the bore.

What affects the cost of a directional bore near FM 908 in Cade Lakes?

The price depends on the route, length, pipe or conduit size, ground, crossings, pavement, pits and equipment time. Arenosa fine sand may need staged reaming; a Second Davidson Creek crossing can add access and depth considerations. Work in FM 908 right of way also brings TxDOT permit planning, while the 386 road miles from Yukon affect mobilization.

Where the Cade Lakes facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cade Lakes

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cade Lakes, Texas

Type the address of your job in Cade Lakes. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cade Lakes

Same county: Somerville · Snook · Clay · Lyons · Tunis. All counties: Texas county list.