trinityboringsolutions.com

Deanville Texas Directional Boring: Crockett Loam, FM 111 and Dry Creek

Quick Answer: Deanville is an unincorporated community in Burleson County, so FM 111 and FM 60 are state roads and other public streets are not city owned. We take directional boring, also called horizontal directional drilling (HDD), work in Texas for crossings near FM 111. Our Yukon, Oklahoma main office is 390 road miles away, with Giddings 19.7 miles southwest of Deanville. Crockett loam covers 73 percent of the mapped area, and heavy clay at depth can grip the pipe and build up on the reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Deanville bores at a glance

  • Unincorporated community in Burleson County, Texas. Population 63 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 390 miles, about 7.6 hours of driving.
  • Ground: Crockett soil is mapped on 73 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 76 percent of the area.
  • Highways inside the boundary: FM 111 and FM 60. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Deanville Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Deanville near Union Pacific?

Deanville is an unincorporated community in Burleson County, so it has no city government; the county or state owns its public roads, including FM 111 and FM 60. The Census Bureau counted 63 residents in 2020, the published count for this small place. We install water, sewer, gas, electric conduit and fiber along those roads and on service routes.

Our main office is in Yukon, Oklahoma, and Deanville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A line job beside FM 111 can range from a 3/4 inch service line to 48 inch casing. Our family business started in 1965, and we have done directional boring since 1982; the size of an FM 111 job shapes its equipment and plan.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Deanville Crockett soil like to bore?

The USDA soil survey maps Crockett loam on 73 percent of Deanville. Fine sandy loam covers 12 percent and clay covers 10 percent at the surface. About 40 inches down, clay is mapped across 98 percent of the area, with an average clay content of 45 percent. The mapped soil classes at that depth are mostly CH, with some CL. In Deanville, we treat soil survey patterns as planning context, not as a substitute for test borings. The shift from loam near the surface to heavy clay below can make the lower part of a bore sticky and resistant to reaming.

USDA soil survey, inside the Deanville mapped community boundaryWhat is mapped
Soil series mappedCrockett 73 percent, Kurten 7 percent, Luling 6 percent, Spiller 5 percent and Zilaboy 4 percent
Texture at the surfaceloam 73 percent, fine sandy loam 12 percent and clay 10 percent
Texture about 40 inches downclay 98 percent
Engineering class about 40 inches downfat clay (CH) 93 percent and lean clay (CL) 5 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches76 percent of the area (0 percent hard rock, 76 percent weathered rock)
Seasonal water table within 60 inches4 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel93 percent of the area

Weathered bedrock is mapped within 60 inches on 76 percent of Deanville, with typical depth at 53 inches; hard bedrock is not mapped in that interval. A soil bit may slow where the bore meets weathered rock. Seasonal water within 60 inches and flood prone soils each cover 4 percent, so Dry Creek is worth checking when planning a channel crossing. High steel corrosion risk is mapped on 93 percent of the area. The Cook Mountain Formation, of Bartonian age, includes clay and marly sand, which can add changing ground conditions along a bore.

What does it take to bore Deanville clay?

Crockett loam overlies heavy clay at depth across much of Deanville. We plan for sticky cuttings and pipe that can bind in the hole, then adjust the drilling and reaming to the ground along the FM 111 route.

  1. Clay control: Crockett soil maps heavy clay below the surface, so we use a thinner fluid with polymer and staged reaming to limit sticky buildup.
  2. Reaming and pipe: Clay can swell around the pipe, so the FM 111 bore is planned so the pipe is ready before the final ream opens the hole.
  3. Utility exposure: Near Deanville Water Supply Corporation lines or electric conduit routes, we hydrovac marked utilities before drilling close; surface paint does not show depth.
  4. Tracking: Along FM 60, a walkover locator follows the drill head from the surface while depth and pitch are recorded as the bore advances.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Where might a Deanville line go under Dry Creek?

FM 111 has 1.1 mapped roadway miles inside the Deanville community boundary, and FM 60 has 0.3 miles. Both are state highways, so a bore beneath either route needs planning for the road right of way. The public road centerline totals 2.4 miles, but the mapped records list no named streets inside the community. There are also no highways mapped within 1.5 miles outside the boundary. That leaves the specific FM 111 or FM 60 route and its access points as the main road details to check before setting bore pits.

CrossingTypeMapped extentWho has a say
FM 111State highway1.1 roadway miles insideState highway office
FM 60State highway0.3 roadway miles insideState highway office
Union PacificRailroad nearby0 miles outsideThe railroad
Dry CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Brushy CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific rail runs along or touches the Deanville boundary, but no railroad is mapped inside the community and no street and rail crossings are mapped there. A crossing of the Union Pacific track needs an agreement with the railroad. Dry Creek is 0.2 miles from the boundary and Brushy Creek is 0.6 miles away; neither is mapped inside the community. Unnamed drainage totals 0.2 miles, and no street crossings of named streams are mapped. For Deanville, we account for the fact that no lakes or ponds are mapped within one mile during boring route planning.

Who has to sign off on Deanville work in Burleson County?

Deanville has no city government, so public roads and permits fall to Burleson County or the state. FM 111 and FM 60 are state highways. For work in either highway right of way, the utility owner submits the TxDOT utility permit application through RULIS, and the TxDOT Bryan District reviews it; we prepare the bore plan and profile and work under the owner’s permit. TxDOT rules set cover depths by line type, and the district can set a different depth in the permit. A Union Pacific crossing needs an agreement from the railroad. Dry Creek or Brushy Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the Deanville Water Supply Corporation lines?

Deanville Water Supply Corporation uses groundwater wells and reports 1,112 service connections serving 2,850 people. Its lines may be relevant to a service route near FM 111 or FM 60, but the line location still needs to be exposed before drilling nearby. Electric service reported in Burleson County includes Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative. The specific line owner is confirmed before a conduit bore, rather than assuming one provider serves every Deanville address.

Line ownerWhat it isSourceSize
Deanville Water Supply CorporationPublic water systemGroundwater wells1,112 connections, 2,850 people served
Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric CooperativeElectric utilities reporting service in Burleson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published for a place this small, so the age of buried services cannot be inferred from a reliable local housing sample. In Deanville, service runs and lines along FM 111 or FM 60 may shape the route. Average precipitation is 40.8 inches a year, with May averaging 5.0 inches and July 2.0 inches, so timing can affect ground conditions. Before a bore near Deanville Water Supply Corporation lines or an electric conduit route, we use hydrovac potholing to expose marked utilities; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Deanville in relation to Giddings?

Deanville is in Burleson County, at an elevation of 368 feet, and its mapped community area is 0.23 square miles. ZIP codes are 77852 and 77836. Cade Lakes is 6.1 miles north, Dime Box is 6.4 miles southwest, and Caldwell is 7.8 miles northeast. Caldwell is the county seat; Giddings, the nearest larger city, is 19.7 miles southwest. The Yukon, Oklahoma main office is 390 road miles away, a 7.6 hour drive, so mobilization is part of planning a Deanville job.

Places near Deanville

What kinds of bores come up near Deanville and Dry Creek?

  • Highway crossing: A bore beneath FM 111 or FM 60 keeps the line below the road surface and avoids cutting through the highway pavement.
  • Water service: A service route near Deanville Water Supply Corporation lines calls for exposing marked utilities before the drill approaches them.
  • Fiber conduit: A conduit route alongside FM 111 starts with confirming the electric or communications line owner and locating existing buried lines.
  • Creek crossing: A route toward Dry Creek needs channel and jurisdiction planning before selecting the bore path and depth.
  • Rail crossing: A line beneath Union Pacific at the Deanville boundary needs the railroad’s crossing agreement and its requirements for the work.
  • Drainage bore: The 0.2 miles of unnamed drainage inside the community may affect pit placement and the route for a local service.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Deanville bore near FM 111?

For a quote near FM 111, give us the address or map pin, what will go in the ground, the pipe or conduit size, and the footage. For example, note whether the route follows FM 60 or crosses it, and whether it is a water line or fiber conduit. A sketch or plans help show the route, pits and nearby crossings.

The Deanville price depends first on the ground: Crockett loam gives way to heavy clay at depth, which can change reaming time and fluid handling. Next, the size and length of the line and the utilities that must be exposed shape the work. Concrete or pavement, pits, excavator time, sand backfill and a Dry Creek or drainage crossing can add steps. A crossing at FM 111 or Union Pacific also brings route and approval details. Mobilization matters because Deanville is 390 road miles from Yukon.

Questions people ask about boring in Deanville

Does Trinity Boring Solutions take Deanville jobs in Burleson County, and who staffs them?

Yes. We take directional boring work in Deanville, and staffing follows the project scope. Our Yukon office coordinates the work with our own crews or crews from vetted partner drilling contractors. That model applies to routes near FM 111 and FM 60 without implying a local Trinity office.

Who controls Deanville streets in Burleson County, and does a bore require cutting them?

Deanville has no city government, so public roads belong to the county or state rather than a city. FM 111 and FM 60 are state highways. Directional boring places a line below the surface instead of open cutting across the road, subject to the applicable highway permit and plan.

Does Crockett soil in Deanville create a corrosion concern, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk on 93 percent of Deanville, so uncoated steel casing and tracer wire need consideration. For Deanville, we account for the soil corrosion concern while recognizing HDPE is not affected by it. The line owner selects any coating for steel, and the planned route near FM 111 helps identify what must be protected.

What ground does a Deanville bore pass through in Crockett soil?

Crockett loam is mapped across 73 percent of Deanville, while clay is mapped on 98 percent of the area at about 40 inches below the surface. That deeper clay can make cuttings sticky and grip the pipe. These USDA soil survey patterns describe mapped ground, not conditions confirmed by test borings along a specific FM 60 route.

Is there rock under Deanville, and how much has bedrock mapped within five feet?

Weathered bedrock is mapped within 60 inches on 76 percent of Deanville, with typical depth at 53 inches; hard bedrock is not mapped within that interval. That does not rule out rock deeper down. A bore near the mapped community may slow where it meets weathered rock, so the route and drilling response matter.

Who approves a bore under Deanville FM 111, and which state office reviews it?

For work in the FM 111 right of way, the utility owner files the permit application online through TxDOT’s RULIS system. The TxDOT Bryan District reviews it. We provide the bore plan and profile and work under the permit issued to the utility owner. A separate Union Pacific crossing also requires a railroad agreement.

How early should I call 811 for a Deanville bore in Burleson County, and what if marks fade?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the notice, make a new request. For a route near FM 111, have worn or moved marks refreshed through Texas811 before work continues.

How far is Deanville from the Yukon office, and does Giddings change mobilization?

Deanville is 390 road miles and a 7.6 hour drive from our Yukon, Oklahoma main office. Giddings is 19.7 miles southwest of Deanville, but it does not change the distance from Yukon. Mobilization is one factor in a quote for work near FM 60, along with ground, length and crossings.

What affects the cost of a Deanville bore near FM 111?

The price depends on the job, not just the footage. Heavy clay below the Crockett loam can affect drilling time, while pipe size, bore length and exposed utilities also shape the scope. Pavement, pits, creek or drainage crossings, and work in the FM 111 right of way can add steps. Yukon remains a mobilization factor we consider when planning directional boring work in Deanville.

Where the Deanville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Deanville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Deanville, Texas

Type the address of your job in Deanville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Deanville

Same county: Somerville · Snook · Clay · Tunis. All counties: Texas county list.