Mullin Texas Directional Boring: Sunev Clay Loam, BNSF Railway, Farmers Creek
Quick Answer: In Mullin, Texas, we use directional boring, also called horizontal directional drilling (HDD), to pass beneath BNSF Railway track without opening the crossing. 3rd Street is the longest named street at 1.11 miles, and Mullin has 8.65 public road miles inside its limits. Our Yukon, Oklahoma main office is 342 road miles from Mullin, where US 183 runs through town. Sunev clay loam covers 52 percent of mapped ground, while bedrock within 40 inches is mapped across 45 percent, so the route needs ground specific planning.
Mullin bores at a glance
- Incorporated city in Mills County, Texas. Population 128 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 342 miles, about 7.2 hours of driving.
- Ground: Sunev soil is mapped on 52 percent of the area, with loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 45 percent of the area.
- Highways inside the boundary: US 183, US 84 and FM 573. State permit office: TxDOT Brownwood District.
- Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
- Named streams inside the boundary: Farmers Creek and Bookwater Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near 3rd Street in Mullin?
We take directional boring work in Mullin, where 3rd Street is the longest named street at 1.11 miles and Sherman Street runs 0.92 miles. The Census Bureau Vintage 2024 estimate puts Mullin at 128 people. For a water, sewer, gas, electric conduit or fiber line along 3rd Street or Sherman Street, we plan the bore around the route and its existing crossings.
Our main office is in Yukon, Oklahoma, and Mullin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. Our range from 3/4 inch service lines to 48 inch casing can fit a small service connection or a larger line along US 183.

What is Mullin ground like around Sunev soil?
The USDA soil survey maps Sunev soil across 52 percent of Mullin, with Bolar soil across 44 percent and Krum across 3 percent. Surface texture is mostly clay loam, mapped across 88 percent of the area. At about 40 inches below the surface, loam is mapped across 52 percent and bedrock across 44 percent; average clay content at that depth is 26 percent. These are mapped soil patterns, not test borings, so a route near 3rd Street still needs to be checked against site conditions.
| USDA soil survey, inside the Mullin city limits | What is mapped |
|---|---|
| Soil series mapped | Sunev 52 percent, Bolar 44 percent and Krum 3 percent |
| Texture at the surface | clay loam 88 percent, gravelly clay loam 8 percent and silty clay 3 percent |
| Texture about 40 inches down | loam 52 percent, bedrock 44 percent and silty clay 3 percent |
| Engineering class about 40 inches down | lean clay (CL) 52 percent and fat clay (CH) 3 percent |
| Average clay content about 40 inches down | 26 percent |
| Bedrock mapped within 60 inches | 45 percent of the area (44 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 3 percent of the area |
Bedrock is mapped within 40 inches across 45 percent of Mullin, including hard bedrock across 44 percent, so a bore may slow or need rock tooling where the route meets it. The USDA soil survey maps no seasonal water table or flood prone soils in the area. High steel corrosion risk is mapped across 3 percent, which can matter for uncoated steel casing or tracer wire; the line owner selects materials. The geologic map names the Aptian age Travis Peak Formation, described as conglomerate, sandstone and limestone.
How do crews bore Mullin loam and clay ground?
We plan each Mullin bore around the mapped clay loam and the chance of shallow bedrock, then track the drill head from the surface so depth and pitch guide the route near 3rd Street.
- Sunev clay loam can cling to the reamer, so we adjust drilling fluid, open the hole in stages and prepare to pull pipe the day the hole is made.
- Where Mullin bedrock approaches the surface, we check the drill head at each rod and allow more time for the change from soil into rock.
- Before drilling near a marked line, we hydrovac pothole it to expose its depth; a planned crossing under Sherman Street is one local example.
- At a Farmers Creek crossing, we plan the bore below the channel and check jurisdiction during planning; the bore leaves the creek bank uncut.

What can a Mullin bore cross near BNSF Railway?
A Mullin bore may need to pass beneath US 183, US 84 or FM 573, as well as local streets, without cutting the route. TxDOT maps 0.4 roadway miles each of US 183 and US 84 inside town limits, plus 1.1 miles of FM 573. Among named streets, 3rd Street runs 1.11 miles, Sherman Street 0.92 miles and 1st Street 0.57 miles. Those street and highway routes affect where entry and exit pits can fit and what lines must be exposed before drilling.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 183 | US highway | 0.4 roadway miles inside | State highway office |
| US 84 | US highway | 0.4 roadway miles inside | State highway office |
| FM 573 | State highway | 1.1 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 1.83 track miles inside | The railroad |
| Farmers Creek | Stream | 0.92 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bookwater Creek | Stream | 0.7 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mullin Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Hampton Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway owns 1.83 track miles in Mullin on its Lampasas Subdivision, and mapped records show two street and rail crossings in town. Any planned bore under the track needs an agreement from BNSF Railway. Farmers Creek runs 0.92 channel miles in town and Bookwater Creek 0.7 miles; five mapped street crossings intersect named streams. Creek routes need depth planning, and their jurisdiction is checked during planning.
Who approves a Mullin bore in Mills County?
Mullin is incorporated, so its city streets belong to the city, while a bore on US 183, US 84 or FM 573 right of way needs a TxDOT utility permit. The TxDOT Brownwood District reviews the highway application. The utility that owns the line submits it through TxDOT RULIS, and we prepare the bore plan and profile for that owner to use. A BNSF Railway track crossing needs an agreement from the railroad; if the route also uses highway right of way, TxDOT asks for a copy. A Farmers Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose buried lines should we check in Mills County near Mullin?
The water provider for a specific Mullin address has to be confirmed with the city, Mills County or the local water district before a bore is planned. Public water records do not identify a provider for each town address. Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative Association report electric service in Mills County; that does not identify the line owner at every Mullin address. We confirm the owner before planning an electric conduit bore near 1st Street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative Association | Electric utilities reporting service in Mills County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates give Mullin a median housing year of 1941; 64 percent of housing was built before 1960, while 6 percent dates to 2000 or later. That age range can mean a replacement bore has to work around older buried lines as well as newer services near Sherman Street. We hydrovac pothole each marked utility on the bore path before drilling near it, because locate paint shows position, not depth.

Do you cover Mullin and nearby Goldthwaite?
Mullin is in Mills County in northwestern Central Texas, at an elevation of 1,430 feet across 0.47 square miles. The town uses ZIP code 76864. Goldthwaite, the county seat, is 9.0 miles southeast; Zephyr is 11.3 miles northwest and Priddy is 12.3 miles northeast. Brownwood, the nearest larger city, is 21.3 miles northwest. From our Yukon, Oklahoma main office, Mullin is 342 road miles away and a 7.2 hour drive, which is part of planning crew mobilization for work near US 183.
Places near Mullin
- Directional boring in Goldthwaite: 9 miles southeast
- Directional boring in Zephyr: 11.3 miles northwest
- Directional boring in Priddy: 12.3 miles northeast
- Directional boring in Blanket: 20 miles north
- Directional boring in Early: 20.5 miles northwest
- Directional boring in Brownwood: 21.3 miles northwest
What kinds of bores come up near Farmers Creek in Mullin?
- Highway crossing: A bore beneath US 183 needs a route and pits planned around the highway pavement and its right of way.
- Water service: A new service near 3rd Street needs the address specific water provider confirmed before the route is planned.
- Fiber conduit: A fiber drop along Sherman Street can be bored beneath the street rather than opened across its pavement.
- Rail crossing: A planned crossing below BNSF Railway track needs an agreement with the track owner before the bore proceeds.
- Creek crossing: At Farmers Creek, plan the bore below the channel and check for U.S. Army Corps of Engineers jurisdiction.
- Electric conduit: Near US 84, confirm which Mills County electric utility owns the line before setting a conduit route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Mullin bore near US 183?
For a Mullin quote, tell us where the work is, such as a map pin on US 183 or 3rd Street; what line is going in; its pipe or conduit size; and the footage. A sketch or plans help show a Farmers Creek crossing, a rail route or a tight street approach so we can assess the path.
The price follows the actual scope: bore length, pipe or conduit size, and whether Sunev clay loam gives way to shallow bedrock all matter. Crossings of BNSF Railway or US 183 add coordination and planning, while pavement, creek routes, pits, excavator time and sand backfill affect the work. The 342 road miles from Yukon also make mobilization part of a Mullin job, and emergency timing or a high profile route can change the requirements.
Questions people ask about boring in Mullin
Does Trinity Boring Solutions take jobs in Mullin and Mills County, and who staffs them?
Yes, we take directional boring work in Mullin and across Texas. The work uses our own crews or crews from satellite yards operated by drilling contractors Trinity has vetted. Our main office is in Yukon, and we stay involved from the first call through the bore log, whether a crew is working near 3rd Street or US 183.
Who owns the Mullin track at BNSF Railway, and what does a bore beneath it need?
BNSF Railway owns the 1.83 track miles mapped in Mullin. A bore under its track needs an agreement from the railroad, which sets crossing conditions such as casing, depth and flagging. If the crossing also uses highway right of way near US 183, TxDOT asks for a copy of the agreement.
Can a line be bored under Farmers Creek in Mullin?
A line can be planned to pass beneath Farmers Creek, which runs 0.92 channel miles inside Mullin. The route needs enough depth to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. A site specific plan determines the bore path and pit locations.
Which electric company owns a Mullin line in Mills County, and who confirms conduit details?
Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative Association report electric service in Mills County. That does not establish which one owns a line at a particular Mullin address. We confirm the line owner and conduit specifications before planning a bore near 1st Street.
Does the city or county control Mullin streets like 1st Street, and must we cut one?
Mullin is incorporated, so its city streets, including 1st Street, belong to the city rather than the county. A directional bore can pass beneath a street without cutting its surface, subject to the route and site conditions. The named highway rights of way are handled separately through TxDOT.
Do older homes near Sherman Street mean replacement bores need extra utility checks in Mullin?
They can. The American Community Survey 2019 to 2023 estimates put Mullin’s median housing year at 1941, and 64 percent of housing was built before 1960. That does not establish the age or location of a buried line, so marked utilities along Sherman Street must be exposed before drilling near them.
Can I call Trinity after hours about an urgent bore near 1st Street in Mullin?
Yes. A person answers Trinity’s phone at (405) 409-7423 around the clock, including for an urgent job near 1st Street. The call lets us discuss the location, line and timing; a site plan still has to account for any marked utilities and nearby crossings.
How much 811 notice does a Mullin bore near 3rd Street need, and what if marks move?
Texas811 needs the locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays; it cannot be submitted earlier than 14 days before the start. If a 3rd Street job starts more than 14 days after the original notice, make a new request. Refresh worn or moved marks through Texas811 before work continues.
What affects the cost of a directional bore in Mullin under or near US 183?
The route and scope determine the price, not the highway name alone. Length, pipe or conduit size, Sunev clay loam or shallow bedrock, and crossings or exposed utilities all affect the work. Pavement, creek crossings, pits and mobilization from the Yukon office also matter for a Mullin job near US 183.
Where the Mullin facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Mullin
- U.S. Census Bureau, TIGER/Line 2024: Mullin boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Mullin
- U.S. Census Bureau, American Community Survey 2019 to 2023: Mullin housing units and year built
- Macrostrat geologic map compilation: map units under Mullin
- U.S. Department of Transportation, North American Rail Network: track owners in Mills County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Mills County
- U.S. Geological Survey, Elevation Point Query Service: Mullin elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Mullin
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Mullin
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Mullin, Texas
Type the address of your job in Mullin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Mullin
All counties: Texas county list.
