trinityboringsolutions.com

Nocona Texas Directional Boring: Bonti Fine Sandy Loam, US 82, Pecan Creek

Quick Answer: Can you get a line under a road, track or creek without cutting it? Along US 82 or Pecan Creek in Nocona, we use directional boring, also called horizontal directional drilling (HDD), to make an underground crossing. Nocona is 148 road miles from our Yukon, Oklahoma main office, and Airport Road can help define access and crossing needs. Bonti soil is common here, while clay at about 40 inches can cling to the reamer. We plan the bore around the route, ground and marked utilities.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Nocona bores at a glance

  • Incorporated city in Montague County, Texas. Population 3,236 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 148 miles, about 3.2 hours of driving.
  • Ground: Bonti soil is mapped on 33 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 52 percent of the area.
  • Highways inside the boundary: US 82, FM 103, Texas State Highway 175, FM 1956 and FM 1759. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Pecan Creek.
  • Public water: City of Nocona, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Pecan Creek in Nocona?

Trinity Boring Solutions takes directional boring work in Nocona, including routes near Pecan Creek and US 82. Can you get a line under a road, track or creek without cutting it? We can bore beneath a crossing so your surface stays intact. The Census Bureau Vintage 2024 estimate puts Nocona at 3,236 residents, all in Montague County.

Our main office is in Yukon, Oklahoma, and Nocona work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A small Nocona service line might use 3/4 inch pipe, while a larger crossing can call for 48 inch casing. We are a family business that started in 1965 and has done directional boring since 1982, with work ranging from a short street service to a longer US 82 crossing.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Nocona Bonti soil like to bore?

Nocona has fine sandy loam at the surface, and the USDA soil survey maps Bonti soil across 33% of the city. Bonti fine sandy loam on 1 to 5 percent slopes covers 29% of the mapped area. At about 40 inches below the surface, the survey maps bedrock in 34%, sandy clay loam in 32% and clay in 28%; sandy ground accounts for 3% at that depth. The average clay content there is 35%. Clay can stick to the reamer and grip pipe, so staged reaming and timely pullback matter.

USDA soil survey, inside the Nocona city limitsWhat is mapped
Soil series mappedBonti 33 percent, Anocon 19 percent, Truce 17 percent, Duffau 11 percent and Renfrow 10 percent
Texture at the surfacefine sandy loam 71 percent, loamy fine sand 11 percent and loam 11 percent
Texture about 40 inches downbedrock 34 percent, sandy clay loam 32 percent and clay 28 percent
Engineering class about 40 inches downlean clay (CL) 52 percent and fat clay (CH) 10 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inches52 percent of the area (1 percent hard rock, 51 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel29 percent of the area

The USDA soil survey maps bedrock within 60 inches across 52% of Nocona, mostly weathered material; hard bedrock is mapped in only 1%. A typical depth is 36 inches, so the route may meet rock sooner than expected. No seasonal water table is mapped within 60 inches, while flood prone soils cover 3%, including around creek drainage. High steel corrosion risk is mapped across 29%, a point for the line owner when choosing casing or tracer wire. The smectitic clay decomposition residuum is Cenozoic and can shrink, crack and swell; the Permian Archer City Formation includes shale and sandstone, so soil to rock transitions can affect steering.

How is a bore run through Nocona bedrock?

We set the Nocona bore path from the plans, then track the drill head from the surface as it advances. Bonti soil and the mapped shallow weathered bedrock call for attention to returns, steering and the planned pullback.

  1. We check the Nocona route against the plans and locate marks, then hydrovac expose each marked utility before the drill approaches it; paint does not show depth.
  2. At a Pecan Creek crossing, we plan the path beneath the channel and check for Corps jurisdiction; the entry and exit pits stay on the banks.
  3. Where Bonti soil gives way to clay at depth, we manage fluid returns and ream in stages to limit sticky cuttings and pressure beneath pavement.
  4. If a Nocona bore meets the mapped weathered bedrock, we slow the advance and track the head’s depth and pitch as the ground changes.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What is in the way of a new line near Nocona Airport Road?

A Nocona bore may need to pass beneath US 82, FM 103, Texas State Highway 175, FM 1956 or FM 1759, all mapped inside the city. US 82 has 3.6 roadway miles within city limits. Among the longer named streets, Airport Road runs 1.25 miles, Clay Street 1.21 miles and Mesquite Street 1.19 miles. Boring can keep pavement and driveways uncut, but the crossing route and access for entry and exit pits shape the plan.

CrossingTypeMapped extentWho has a say
US 82US highway3.6 roadway miles insideState highway office
FM 103State highway1 roadway miles insideState highway office
Texas State Highway 175State highway0.8 roadway miles insideState highway office
FM 1956State highway0.7 roadway miles insideState highway office
FM 1759State highway0.6 roadway miles insideState highway office
Pecan CreekStream0.5 channel miles insideChecked for Corps of Engineers jurisdiction
Panther CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Salt CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Nocona or within 1 mile outside the limits, so no mapped track route is identified for a crossing. Pecan Creek runs 0.5 channel miles through the city, and public records map 3 street crossings of named streams. Panther Creek and Salt Creek are also mapped nearby. A Pecan Creek bore needs a route beneath the channel, with the creek crossing checked for U.S. Army Corps of Engineers jurisdiction during planning.

Whose permission does a Nocona bore in Montague County need?

Nocona city streets belong to the city, while work in the right of way of US 82, FM 103, Texas State Highway 175, FM 1956 or FM 1759 needs a TxDOT utility permit. For electric and communication lines, the cover is at least 60 inches below the lowest crossed highway grade and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it. Pressurized sewer needs 60 inches at a crossing. The utility owner applies through TxDOT’s online RULIS system, and the TxDOT Wichita Falls District reviews it; we prepare the bore plan and profile for the owner’s application.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Nocona near the City of Nocona water system?

The City of Nocona public water system uses surface water and reports 1,572 service connections serving 3,170 people. On Mesquite Street or another route near that system, the existing water line location matters to the bore plan. Electric service reported in Montague County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative. We confirm the line owner for a specific address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of NoconaPublic water systemSurface water1,572 connections, 3,170 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric CooperativeElectric utilities reporting service in Montague CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Nocona’s median housing year at 1966; 45% of homes were built before 1960, 44% from 1960 to 1999 and 11% in 2000 or later. Along Clay Street, an older service route may involve existing lines, while newer construction may need a new connection. We use hydrovac potholing to expose marked utilities on the bore path because locate paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Nocona and nearby Montague?

Nocona is an incorporated city in Montague County, with 2.81 square miles of land and an elevation of 973 feet. ZIP code 76255 covers the city. Nocona Hills is 7.1 miles northeast, Montague is 8.2 miles south, Ringgold is 12.4 miles west, St. Jo is 13.4 miles southeast and Bowie is 17.0 miles southwest. Montague is the county seat, while Gainesville is the nearest larger city at 34.9 miles east. Our Yukon yard is 148 road miles away, a 3.2 hour drive, which matters when planning mobilization for a Nocona job.

Places near Nocona

Which jobs call for a bore near Nocona Clay Street?

  • Highway crossing: A bore beneath US 82 keeps the existing pavement uncut and follows the cover depth set for the line type.
  • Water service: A new service near the City of Nocona system needs a planned route around existing water lines.
  • Creek crossing: A Pecan Creek bore runs beneath the channel, with the route checked for Corps jurisdiction during planning.
  • Street conduit: A Clay Street fiber or electric conduit bore can pass below pavement and marked utilities without an open cut.
  • Street service: A Mesquite Street connection uses entry and exit pits beside the route, with utilities exposed before drilling near them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Nocona bore under US 82?

For a Nocona quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help. On a US 82 crossing, the profile and route help show the highway limits, entry and exit pits and needed cover. For a Clay Street service, identify the route and nearby marked utilities so we can assess the work before setting the scope.

The route through Bonti soil can call for staged reaming if clay at depth builds on the tool. A crossing beneath US 82 brings highway cover and pavement into the plan, while Pecan Creek adds a channel crossing to assess. Length, pipe or conduit size, soil and rock, utilities to expose, pavement, creek or drainage crossings, pits and excavator time all affect the work. Mobilization also depends on the 148 road miles from Yukon, and urgent or high profile work can change the scope.

Questions people ask about boring in Nocona

Does Trinity Boring Solutions take directional boring jobs in Nocona, Montague County?

Yes, we take directional boring work in Nocona and staff it with our own crews or crews from vetted partner drilling contractors. The work is handled through Trinity from the first call to the bore log. For a route near Pecan Creek or US 82, the planned crossing and line details help define the work.

Who approves a bore under US 82 in Nocona, and which state office reviews it?

The utility owner applies for a TxDOT utility permit for work in the US 82 right of way, and the TxDOT Wichita Falls District reviews it. The owner files through RULIS, with the bore plan and profile prepared for that application. Required cover depends on the line type and crossing.

Can you bore a line under Pecan Creek in Nocona?

A line can be bored beneath Pecan Creek, which runs 0.5 channel miles through Nocona. The route needs to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Nearby drainage and access for pits also affect the bore plan.

Who runs Nocona’s public water system, and where does its water come from?

The City of Nocona owns the public water system, and its source is surface water. The system reports 1,572 service connections serving 3,170 people. If your bore route is near the city water network, the existing line location needs to be considered before drilling.

Which electric utilities report service in Nocona, Montague County, and who confirms conduit specs?

Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative report electric service in Montague County. Those records do not identify the provider at every Nocona address. The line owner should be confirmed before conduit planning, including the required specifications for that line.

Does Nocona control Mesquite Street, and does a bore have to cut it?

Mesquite Street is a city street in incorporated Nocona, so it belongs to the city. A directional bore can pass beneath the street without cutting its pavement. The route still needs to account for marked utilities and space for entry and exit pits.

Can I reach Trinity after hours about an urgent bore on Mesquite Street in Nocona?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent Mesquite Street bore, have the location and the line or repair scope ready to discuss. Trinity also provides 24 hour emergency response for work in Nocona.

How much notice does Texas811 need for a Nocona bore near Airport Road, and what if marks change?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For an Airport Road bore, worn or moved marks must be refreshed through Texas811 before work continues. A delay beyond 14 days past the original notice requires a new request.

What affects the cost of directional boring under US 82 in Nocona?

The US 82 route, required cover and pavement affect the scope, along with bore length, pipe size, soil and rock, utilities to expose, pits and equipment time. Pecan Creek drainage crossings can add planning needs, and mobilization reflects the 148 road miles from Yukon. High profile or emergency work can also change the requirements.

Where the Nocona facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Nocona

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Nocona, Texas

Type the address of your job in Nocona. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Nocona

Same county: Sunset. All counties: Texas county list.