trinityboringsolutions.com

Nocona Hills Texas Directional Boring: Truce Soil, FM 2953 and Polecat Creek

Quick Answer: Nocona Hills is an unincorporated community in Montague County, so its streets are county roads unless a state route such as FM 2953 is involved. Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), for routes near Polecat Creek. The Yukon office is 163 road miles away, including for work along Nocona Drive. Truce soil and clay mapped about 40 inches down can make reaming and fluid control important.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Nocona Hills bores at a glance

  • Unincorporated community in Montague County, Texas. Population 637 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 163 miles, about 3.6 hours of driving.
  • Ground: Truce soil is mapped on 25 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 34 percent of the area.
  • Highways inside the boundary: FM 2953. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Polecat Creek, Barefoot Branch and Farmers Creek.
  • Public water: Nocona Hills Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near FM 2953 in Nocona Hills?

Trinity Boring Solutions takes directional boring work in Nocona Hills, an unincorporated community in Montague County where streets such as Weaver Road are under county rather than city government. The Census Bureau counted 637 residents in 2020 and does not publish annual estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber along local routes such as Nocona Drive and FM 2953.

Our main office is in Yukon, Oklahoma, and Nocona Hills work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982. Our range from 3/4 inch service lines to 48 inch casing fits small service routes on Casino Road as well as larger line work near FM 2953.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does directional boring meet in Nocona Hills Truce soil?

The USDA soil survey maps Truce soil across 25% of Nocona Hills, with clay and weathered rock patterns that can change how a bore advances. Fine sandy loam is the most common mapped surface texture at 43%, while 34% of the area is mapped as clay at about 40 inches below the surface. Average clay content at that depth is 37%, and sandy ground accounts for 7%. These are mapped soil patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Nocona Hills mapped community boundaryWhat is mapped
Soil series mappedTruce 25 percent, Bonti 20 percent, Windthorst 19 percent, Pulexas 6 percent and Duffau 5 percent
Texture at the surfacefine sandy loam 43 percent, stony fine sandy loam 29 percent and loamy fine sand 4 percent
Texture about 40 inches downclay 34 percent, bedrock 20 percent and sandy clay loam 19 percent
Engineering class about 40 inches downlean clay (CL) 53 percent and silty clay (CL ML) 6 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches34 percent of the area (0 percent hard rock, 34 percent weathered rock)
Seasonal water table within 60 inches1 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel32 percent of the area

The survey maps weathered bedrock within 60 inches across 34% of Nocona Hills, with typical bedrock depth at 35 inches; that can slow a bore and call for a tougher bit. Hard bedrock is not mapped in that depth range. Seasonal water within 60 inches covers 1%, while flood prone soils cover 6%, including creek areas where channel depth matters. High steel corrosion risk is mapped over 32%, so the line owner should consider casing and tracer wire materials. The Quaternary Pebbly Sandy Clay Loam Colluvium includes clay, carbonate, limestone and sandstone, which can mean changing ground along one route.

How do we bore Nocona Hills clay and Truce soil?

We choose the tooling and fluid plan for the ground shown along each Nocona Hills route. Truce soil, clay at about 40 inches and mapped weathered bedrock all affect how we keep the bore on line.

  1. Truce soil and clay mapped at about 40 inches can hold the hole open but cling to the reamer, so we use thinner fluid and staged reaming.
  2. Where clay content is heavy near Nocona Drive, we watch returns and manage pressure to reduce the chance of lifting pavement.
  3. With weathered bedrock mapped in parts of Nocona Hills, we slow down and use tooling suited to the soil and rock transition.
  4. Before drilling near a marked line along Casino Road, we hydrovac pothole to verify its depth; the walkover locator tracks the head and logs depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What might a Nocona Hills bore cross near Polecat Creek?

FM 2953 is the mapped state highway inside Nocona Hills, with 0.8 roadway miles in the community; a crossing there needs a route planned beneath the highway right of way. No other highway is mapped within 1.5 miles outside the boundary. Among the long local streets, Nocona Drive runs 3.28 miles, Casino Road 2.25 miles and Weaver Road 1.96 miles inside the community. Oak Shores Road adds another 1.87 miles, so a bore may follow neighborhood streets as well as cross them.

CrossingTypeMapped extentWho has a say
FM 2953State highway0.8 roadway miles insideState highway office
Polecat CreekStream3.47 channel miles insideChecked for Corps of Engineers jurisdiction
Barefoot BranchStream0.78 channel miles insideChecked for Corps of Engineers jurisdiction
Farmers CreekStream0.42 channel miles insideChecked for Corps of Engineers jurisdiction
Red BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Lake NoconaLake or pond1,346 acres, insideChecked for Corps of Engineers jurisdiction
Leisure LakeLake or pond35 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad or street and rail crossing is mapped inside Nocona Hills or within 1 mile outside it, so a rail agreement is not part of the mapped crossing picture. Polecat Creek runs 3.47 channel miles within the community; Barefoot Branch and Farmers Creek add 0.78 and 0.42 miles. Five mapped street crossings intersect named streams. Lake Nocona and Leisure Lake are inside the boundary, so a route near either water body needs to be checked during planning.

Whose approval does a Nocona Hills bore need in Montague County?

Nocona Hills has no city government, so county or state authority applies to its streets; FM 2953 is a state highway reviewed by the TxDOT Wichita Falls District. For work in that right of way, the utility owner files the utility permit through TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. TxDOT cover requirements set depth: electric and communication lines need 60 inches at crossings, water lines 60 inches, and pressurized sewer lines 60 inches. Existing highway pavement is bored or tunneled, with rural crossings extending beneath all travel lanes. Polecat Creek and other water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. No railroad is mapped near the community.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Nocona Hills near Nocona Hills Water Supply Corporation?

Nocona Hills Water Supply Corporation reports groundwater wells serving 600 people through 425 service connections. That system is a key locate concern when planning work near Nocona Drive or other service routes. Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative report electric service in Montague County; the owner at a specific address must be confirmed before a conduit bore. We use hydrovac potholing to expose marked water and electric lines on the planned path before drilling near them.

Line ownerWhat it isSourceSize
Nocona Hills Water Supply CorporationPublic water systemGroundwater wells425 connections, 600 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric CooperativeElectric utilities reporting service in Montague CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Nocona Hills at 1987; 6% of homes were built before 1960, 69% from 1960 to 1999 and 25% in 2000 or later. A replacement bore along Casino Road may need to avoid older buried lines, while a newer service still has to clear existing utilities. Locate marks show position, not depth, so we expose marked lines before the drill approaches them.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Nocona Hills from St. Jo and the Yukon office?

Nocona Hills is in Montague County, Texas, at an elevation of 894 feet and covers 5.2 square miles. Its ZIP code is 76255. Nocona is 7.1 miles southwest, St. Jo is 12.4 miles southeast, and Montague, the county seat, is 13.6 miles south. Bowie, the nearest larger city listed, is 23.5 miles southwest. The Yukon yard is 163 road miles away, a 3.6 hour drive, which is part of planning crew mobilization for work near FM 2953 or Lake Nocona.

Places near Nocona Hills

What boring work comes up along Nocona Drive in Nocona Hills?

  • Water service: A new connection near the Nocona Hills Water Supply Corporation can be bored beneath a street after the route and existing water lines are located.
  • Fiber conduit: A route along Nocona Drive can avoid open cuts across pavement and driveways, with the conduit size and street crossings set in the plan.
  • Highway crossing: A line crossing FM 2953 needs a TxDOT utility permit through the utility owner and a bore plan for the state right of way.
  • Creek crossing: A Polecat Creek route needs depth planning below the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Replacement bore: Work near Casino Road can replace an aging service while potholing marked lines before drilling near the existing route.
  • Lake side route: A bore near Lake Nocona needs access and crossing details laid out so pits stay on land and the water edge remains uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Nocona Hills quote near Oak Shores Road?

For a route near Oak Shores Road, tell us the address or map pin first, then what needs to go underground. Add the pipe or conduit size and estimated footage, such as a water service crossing a named street or fiber along Nocona Drive. A sketch or plans help us place the pits, crossings and access before we scope the bore.

Ground, crossings and logistics shape the price for a Nocona Hills bore. Truce soil and mapped weathered bedrock affect tooling and reaming; a Polecat Creek crossing or a utility crossing adds planning and exposure work. FM 2953 pavement may call for a permitted highway bore. We also account for line size, length, concrete or pavement, pits, excavator time, sand backfill and mobilization from Yukon, 163 road miles away. High profile or emergency work can change the work plan.

Questions people ask about boring in Nocona Hills

Does Trinity Boring Solutions take jobs in Nocona Hills, Montague County, and how are crews assigned?

Yes. We take directional boring work in Nocona Hills, Montague County, and manage the job from the first call through the bore log. Our crews or crews from vetted drilling partners may be on site, including for a route near FM 2953. The work is staffed for the job rather than from a local office.

Who owns electric lines in Nocona Hills, Montague County, and who confirms conduit specs?

Montague County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative. That list does not identify the provider for each address. We confirm the specific line owner and conduit requirements before planning a bore near the Nocona Hills Water Supply Corporation system or a street such as Weaver Road.

Are Nocona Hills streets such as Weaver Road county roads, and can a bore avoid cutting them?

Nocona Hills is an unincorporated community with no city government, so county or state authority applies to its streets. A directional bore can pass beneath Weaver Road without an open cut when the route and site conditions allow. FM 2953 is a state highway, so its right of way has a separate TxDOT permit process.

Do older buried lines affect a replacement bore near Casino Road in Nocona Hills?

They can. The American Community Survey 2019 to 2023 estimates put the median housing year at 1987, with 6% of homes built before 1960. Those figures do not date buried utilities, so we locate and expose marked lines along Casino Road before a replacement bore approaches them.

Can Truce soil corrode steel pipe for a Nocona Hills bore, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 32% of Nocona Hills, including mapped Truce soil areas. The line owner chooses materials and any coating for steel casing or tracer wire. HDPE is not affected by this soil corrosion concern, so the owner can weigh it against the design and use of the line.

What ground should I expect along a Nocona Hills bore through Truce soil?

The USDA soil survey maps Truce soil across 25% of Nocona Hills and clay across 34% of the area at about 40 inches below the surface. Average clay content at that depth is 37%, and bedrock is mapped within 60 inches across 34%. Those patterns suggest the route may shift from sticky soil to slower drilling in weathered rock.

Does the distance from Yukon to Nocona Hills near Bowie change the job plan?

The Yukon yard is 163 road miles from Nocona Hills, a 3.6 hour drive, so mobilization is part of the job scope. Bowie is 23.5 miles southwest of the community, but that does not change the distance from our main office. A route near FM 2953 still needs its own crossing and permit planning.

How early should I call Texas811 for a Nocona Hills bore along Nocona Drive?

Texas law requires the locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If a Nocona Drive start slips more than 14 days past the original notice, make a new request. Marks that wear off or move must be refreshed through Texas811 before work continues.

What affects the price of directional boring near FM 2953 in Nocona Hills?

Price depends on length, line size, Truce soil and weathered bedrock, the utilities crossed, pavement, pits and access. A bore under FM 2953 also involves a TxDOT utility permit and highway crossing details. A route near Polecat Creek adds water crossing planning, while mobilization from Yukon is affected by the 163 road miles.

Where the Nocona Hills facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Nocona Hills

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Nocona Hills, Texas

Type the address of your job in Nocona Hills. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Nocona Hills

Same county: Sunset. All counties: Texas county list.